• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.567-582
• /
• 2011

The growing popularity of the Internet has caused the size and complexity of communications and computing systems to greatly increase in recent years. To alleviate this increased management complexity, novel autonomic management architectures have emerged, in which many automated components manage the network's resources in a distributed fashion. However, in order to achieve effective collaboration between these management components, they need to be able to efficiently exchange information in a timely fashion. In this article, we propose a context dissemination framework that addresses this problem. To achieve scalability, the management components are structured in a hierarchy. The framework facilitates the aggregation and translation of information as it is propagated through the hierarchy. Additionally, by way of semantics, context is filtered based on meaning and is disseminated intelligently according to dynamically changing context requirements. This significantly reduces the exchange of superfluous context and thus further increases scalability. The large size of modern federated cloud computing infrastructures, makes the presented context dissemination framework ideally suited to improve their management efficiency and scalability. The specific context requirements for the management of a cloud data center are identified, and our context dissemination approach is applied to it. Additionally, an extensive evaluation of the framework in a large-scale cloud data center scenario was performed in order to characterize the benefits of our approach, in terms of scalability and reasoning time.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.353-362
• /
• 2005

We performed a new high-resolution spectroscopy of AG Vir for 4 nights from 25 March 2004 using the BOES (Bohyunsan Optical Echelle Spectrograph) attached to the 1.8-m reflector at Bohyunsan Optical Astronomy Observatory, and obtained a total of 59 spectra where all orbital phases are covered. To get the radial velocities of the binary system, both method of the CCF (Cross-Co..elation Function)and the BF (Broadening Function) were applied to the analysis of all the observed spectra. From these, the CCF could calculate the radial velocities of the primary star alone, while the BF could determine those of the primary and the secondary components. New absolute dimensions were deduced with the combination of our spectroscopic orbital elements ($K_1=90.5km/s$와 $K_2=258.8$) and the photometric solutions of Bell, Rainger, & Hilditch (1990): $A_1,=1.99M_\bigodot,\;M_2=0.62M_\bigodot,\;R_1=2.21R_\bigodot,\;R_2=1.36R_\bigodot,\;L_1=13.17L_\bigodot,\;and\;L_2=3.47L_\bigodot$. Our absolute parameters are larger and brighter than those derived from Bell, Rainger, & Hilditch (1990). We re-analyzed all the previous radial-velocity curves of AG Vir and, as a result, can see that its system velocity scatters largely up to ${\pm}8km/s$. However, we, at present, cannot determine this as the light-time effect due to the third body, which was suggested as a cause of the orbital period changes by Qian (2001).

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.73-81
• /
• 1989

This study was conducted to estimate heritabilities, genetic and phenotypic correlations on economic traits in layers. The data analysis were the records of 351 pullets in S. C. W. Leghorn and 326 pullets in R. I. Red from March 1, 1980 to July 31.1981. The results obtained are summarized as follows：1 The average body weights at the first egg, 300 and 500 days of age were 1, 409, 1, 602 and 1, 709g S. C. W. Leghorn, and 1, 965, 2, 305, and 2, 479g in the R. I. Red, respectively. The age at first egg of the S. C. W, Leghorn and R. I. Red were 156 days and 163 days, respectively. The number of egg produced by the S. C. W. Leghorn and R. I. Red to 300 days and 500 days of age were 101.18, 214.39, and 101.05, 214.93, respectively. The egg weight at first egg, 300 and 500 days of age were 41.93, 57.65 and 60.33g in the S. C. W. Leghorn and 41.52, 57.62 and 60.57g in the R. I. Red, respectively. 2. The heritability estimates based on the variance of sire and dam components were 0.402-0.612 and 0.275-0.458 in the S. C. W. Leghorn, 0.309-0.523 and 0.134-0.380 in R. I. Red for body weight； 0.167 and 0.139 in the 5. C. W. Leghorn, 0.169 and 0.095 in the R.1. Red for age at first egg：0.214-0.139 and 0.336-0.341 in S. C. W Leghorn, 0.137-0.259 and 0.024-0.102 in the R. I. Red for number of egg production； 0.537-0.769 and 0.374-0.686 in the S. C. W. Leghorn, 0.519-0.631 and 0.116-0.365 in the R. I. Red for egg weight, respectively. 3. The genetic correlation coefficients of economic traits were as follows： In the S. C. W. Leghorn and R. I. Red , the coefficients between body weights and age at the first egg, 0.328-0.426 and 0.186-0.244：between body weights and number of egg production, -0.666--0.498 and -0.452--0.073：between body weight and egg weight, 0.384-0.774 and 0.126-0.612； between age at first egg and number of egg production, -0.639--0.452 and -0.754--0.320； between age at first egg and egg weight, 0.475-0.705 and 0.021-0.605； between number of egg production and egg weight, -0.623--0.355 and -0.861--0.327, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.97-107
• /
• 2013

The aim of this study was to establish relationships between chemical and physical parameters of wheat with performance and digestibilities of feed components in broiler chickens fed on wheat-based diets. Ninety-four wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolism cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), liveweight gain (LWG) and gain:feed were measured weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, dry matter retention, oil and neutral detergent fibre (NDF) digestibility. At 28 d the birds were humanely killed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal dry matter, starch and protein digestibility. When wheat parameters were correlated with bird performance data, it was found that specific weight was not significantly (p>0.05) related to bird performance. Bird DMI, LWG and gain:feed were best correlated (p<0.05) with the rate of starch digestion, although the coefficients of correlation (r) were still low (0.246 to 0.523). A negative relationship (p<0.01) between AME and total (r = -0.432) and soluble (r = -0.304) non starch polysaccharide (NSP) was observed in this study. Thousand grain weight (TG) was positively correlated with DMI (r = 0.299), LWG (r = 0.343) and gain:feed (r = 0.371). When establishing multiple regression relationships, correlation coefficients greater than 0.8 were achieved for DMI, LWG, gain:feed and ileal crude protein digestibility. However, the economics involved in determining the parameters involved in the regressions make the process impractical.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.2
• /
• pp.180-186
• /
• 2001

The condensation heat transfer coefficients of pure refrigerants R-22, R-134a, and a binary refrigerant mixture R-410A flowing in a small diameter tube were investigated. The experiment apparatus consists of a refrigerant loop and a water loop. The main components of the refrigerant loop consist of a variable-speed pump, a mass flowmeter, an evaporator, and a condenser(test section). The water loop consists of a variable-speed pump, an isothermal tank, and a flowmeter. The condenser is a counterflow heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus. The test section consists of smooth, horizontal copper tube of 3.38mm outer diameter and 1.77mm inner diameter. The length of test section is 1220mm. The refrigerant mass fluxes varied from 450 to 1050kg/(㎡$.$s) and the average inlet and outlet qualities were 0.05 and 0.95, respectively. The main results were summarized as follows ; in the case of single-phase flow, the heat transfer coefficients increase with increasing mass flux. The heat transfer coefficient of R-410A was higher than that of R-22 and R-134a, and the heat transfer for small diameter tubes were about 20% to 27% higher than those predicted by Gnielinski. In the case of two-phase flow, the heat transfer coefficients also increase with increasing mass flux and quality. The condensation heat transfer coefficient of R-410A was slightly higher than that of R-22 and R-134a. Most of correlations proposed in the large diameter tube showed significant deviations with experimental data except for the ranges of low quality and low mass flux.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1524-1533
• /
• 1996

Risidual stress of cylindrical glass rods are measured by photoelasticity to study the variation of stresses with respect to heat treatment temperatures. In order to measure the stresses accurately, fringe sharpening and multiplication techniques are applied to the determination of photoelastic fringe orders. Filon's separationmethod is used to resolve circumferential and redial stress ocmponents from isochromatic fringes which are the same as in-plane maximum shearing stresses. According to the photoelastic measurements, residual stress is increased as the heat treatment temperature of the rods is raised from $560^{\circ}C$ to $650^{\circ}C$ All the circumferential stress components are changed from tensile stresses to compressive ones at approximate $R_m$/$R_o$ = 0.6, where $R_o$/ is outer radius and $R_m$any measured radius. This analysis shows that residual stresses of the glass rods approach zero if the rods are heat-treated near the strain point.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.337-340
• /
• 2009

Wireless tele-home-care application gives new possibilities for ECG (electrocardiogram) monitoring system with wearable biomedical sensors. Thus, continuously development of high convenient ECG monitoring system for high-risk cardiac patients is essential. This paper describes to monitor a person's ECG using wearable approach. A wearable belt-type ECG electrode with integrated electronics has been developed and has proven long-term robustness and monitoring of all electrical components. The measured ECG signal is transmitted via an ultra low power consumption wireless sensor node. ECG signals carry a lot clinical information for a cardiologist especially the R-peak detection in ECG. R-peak detection generally uses the threshold value which is fixed thus it bring errors due to motion artifacts and signal size changes. Variable threshold method is used to detect the R-peak which is more accurate and efficient. In order to evaluate the performance analysis, R-peak detection using MIT-BIH databases and Long Term Real-Time ECG is performed in this research. This concept able to allow patient to follow up critical patients from their home and early detecting rarely occurrences of cardiac arrhythmia.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.487-493
• /
• 1998

This study was attempted to investigate the changes of chemical components by different yeast strains during alcohol fermentation at $12^{\circ}C$. Saccharomyces cerevisiae, Saccharomyces cerevisiae+Schizosaccharomyces pombe, and Schizosaccharomyces pombe were inoculated in the Seibel grape must, respectively. Sch. pombe began to metabolize malic acid after 4 days fermentation actively and utilized approximately 54% of initial malic acid. Ethanol contents of S. cerevisiae, S. cerevisiae+Sch.. pombe and Sch. pombe were 11.5%, 11.2%, and 10.0%, respectively. The fermentability of Sch. pombe was slower than that of S. cerevisiae. The production of sulfite showed a positive linear relationship with the yeast growth (P<0.01). Sensory scores indicated that the wine samples fermented by S. cerevisiae and Sch. pombe were not significantly different in color, odor, after taste and overall acceptability. Especially, the taste of Sch. pombe was significantly better than that of S. cerevisiae (P<0.05).

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.128-132
• /
• 2002

One of the fundamental components important to the analysis of spatial objects is to represent topological relationships between spatial features. Users of geographic information systems retrieve a lot of objects from spatial database and analyze their condition by means of topological relationships. The existing methods that represent these relationships have the disadvantage that they have limited information in $R^2$. In this paper, we represent and define the topological relationships between 3-dimensional spatial objects using the several representing methods of 2-dimensional features. We use the diverse representing methods, which include the 4-, 9-intersection, dimension extended and calculus-based method. Furthermore, we discuss OGC's topological relationships and operators for 3-dimensional spatial data.

• Steel and Composite Structures
• /
• v.31 no.6
• /
• pp.541-558
• /
• 2019

In Special Concentrically Braced Frames (SCBFs), vertical and horizontal components of the brace force must be resisted by column and beam, respectively but normal force component existing at the gusset plate-to-column and beam interfaces, creates out-of-plane action making distortion in column and beam faces adjacent to the gusset plate. It is a main concern in Hollow Structural Section (HSS) columns and beams where their webs and gusset plate are not in the same plane. In this paper, a new gusset plate passing through the HSS columns and beams, named as through gusset plate, is proposed to study the force transfer mechanism in such gusset plates of SCBFs compared to the case with conventional gusset plates. For this purpose, twelve SCBFs with diagonal brace and HSS columns and twelve SCBFs with chevron brace and HSS columns and beams are considered. For each frame, two cases are considered, one with through gusset plates and the other with conventional ones. Based on numerical results, using through gusset plates prevents distortion and out-of-plane deformation at HSS column and beam faces adjacent to the gusset plate helping the entire column and beam cross-sections to resist respectively vertical and horizontal components of the brace force. Moreover, its application increases energy dissipation, lateral stiffness and strength around 28%, 40% and 32%, respectively, improving connection behavior and raising the resistance of the normal force components at the gusset plate-to-HSS column and beam interfaces to approximately 4 and 3.5 times, respectively. Finally, using such through gusset plates leads to better structural performance particularly for HSS columns and beams with larger width-to-thickness ratio elements.