1 |
Hadianfard, M.A. and Khakzad, A.R. (2016), "Inelastic buckling and post-buckling behavior of gusset plate connections", Steel Compos. Struct., Int. J., 22(2), 411-427. http://dx.doi.org/10.12989/scs.2016.22.2.411
DOI
|
2 |
Izadi, A. and Aghakouchak, A.A. (2018), "Evaluation of seismic criteria of built-up special concentrically braced frames", Steel Compos. Struct., Int. J., 29(1), 23-37. http://dx.doi.org/10.12989/scs.2018.29.1.023
|
3 |
Kiamanesh, R., Abolmaali, A. and Ghassemieh, M. (2010), "The effect of stiffeners on the strain patterns of the welded connection zone", J. Constr. Steel Res., 66(1), 19-27.
DOI
|
4 |
Kosteski, N. and Packer, J.A. (2003), "Longitudinal plate and through plate-to-hollow structural section welded connections", J. Struct. Eng., 129(4), 478-486.
DOI
|
5 |
Lai, J.W. and Mahin, S.A. (2013), "Experimental and analytical studies on the seismic behavior of conventional and hybrid braced frames", Pacific Earthquake Engineering Research Center.
|
6 |
Lee, S.L., Ting, L.C. and Shanmugam, N.E. (1993), "Use of external T-stiffeners in box-column to I-beam connections", J. Constr. Steel Res., 26(2-3), 77-98.
DOI
|
7 |
Liu, J. and Astaneh-Asl, A. (2000), "Cyclic testing of simple connections including effects of slab", J. Struct. Eng., 126(1), 32-39.
DOI
|
8 |
Lopez, W.A., Gwie, D.S., Lauck, T.W. and Saunders, C. (2004), "Structural design and experimental verification of a bucklingrestrained braced frame system", Eng. J., 41(4), 177-186.
|
9 |
Mirghaderi, S.R., Torabian, S. and Keshavarzi, F. (2010), "I-beam to box-column connection by a vertical plate passing through the column", J. Struct. Eng., 32(8), 2034-2048.
DOI
|
10 |
Nunez, E., Torres, R. and Herrera, R. (2017), "Seismic performance of moment connections in steel moment frames with HSS columns", Steel Compos. Struct., Int. J., 25(3), 271-286. http://dx.doi.org/10.12989/scs.2017.25.3.271
|
11 |
Sabbagh, A.B., Chan, T.M. and Mottram, J.T. (2013), "Detailing of I-beam-to-CHS column joints with external diaphragm plates for seismic actions", J. Constr. Steel Res., 88, 21-33.
DOI
|
12 |
Song, Q.Y., Heidarpour, A., Zhao, X.L. and Han, L.H. (2016), "Performance of double-angle bolted steel I-beam to hollow square column connections under static and cyclic loadings", Int. J. Struct. Stabil. Dyn., 16(2), 1450098.
DOI
|
13 |
Sabelli, R. and Hohbach, D. (1999), "Design of cross-braced frames for predictable buckling behavior", J. Struct. Eng., 125(2), 163-168.
DOI
|
14 |
Shaback, B. and Brown, T. (2003), "Behavior of square hollow structural steel braces with end connections under reversed cyclic axial loading", Can. J. Civil Eng., 30(4), 745-753.
DOI
|
15 |
Shin, K.J., Kim, Y.J., Oh, Y.S. and Moon, T.S. (2004), "Behavior of welded CFT column to H-beam connections with external stiffeners", J. Eng. Struct., 26(13), 1877-1887.
DOI
|
16 |
Thornton, W.A. (1984), "Bracing connections for heavy construction", Eng. J., 21(3), 139-148.
|
17 |
Thornton, W.A. and Muir, L.S. (2008), "Vertical bracing connections in the seismic regime", Proceedings of connections VI, AISC.
|
18 |
Tremblay, R. (2002), "Inelastic seismic response of steel bracing members", J. Constr. Steel Res., 58(5), 665-701.
DOI
|
19 |
Ting, L.C., Shanmugam, N.E. and Lee, S.L. (1991), "Box-column to I-beam connections with external stiffeners", J. Constr. Steel Res., 18(3), 209-226.
DOI
|
20 |
Torabian, S., Mirghaderi, S.R. and Keshavarzi, F. (2012), "Moment-connection between I-beam and built-up square column by a diagonal through plate", J. Constr. Steel Res., 70, 385-401.
DOI
|
21 |
Zahrai, S.M. (2015), "Cyclic Testing of Chevron Braced Steel Frames with IPE shear panels", Steel Compos. Struct., Int. J., 19(5), 1167-1184. http://dx.doi.org/10.12989/scs.2015.19.5.1167
DOI
|
22 |
Uriz, P. and Mahin, S. (2004), "Summary of test results for UC Berkeley special concentric braced frame specimen", No. 1 (SCBF-1), Preliminary Observations, University of California, Berkeley, CA, USA.
|
23 |
Whitmore, R.E. (1952), "Experimental investigation of stresses in gusset plates", Engineering Experiment Station, University of Tennessee, Knoxville, TN, USA.
|
24 |
Williams, G.C. and Richard, R.M. (1986), "Steel Connection Design Based on Inelastic Finite Element Analysis", Report of the Department of Civil Engineering and Engineering Mechanics; The University of Arizona.
|
25 |
Zahrai, S.M. and Jalali, M. (2014), "Experimental and analytical investigation on seismic behavior of ductile steel knee braced frames", Steel Compos. Struct., Int. J., 16(1), 1-21. http://dx.doi.org/10.12989/scs.2014.16.1.001
DOI
|
26 |
Alipour, A. (2009), "Gusset Plate Connections in Concentrically Braced Steel Structures", In: Structures Congress: Don't Mess with Structural Engineers: Expanding Our Role, pp. 1-10.
|
27 |
ABAQUS 6.12 [Computer software], Dassault Systemes Simulia Corporation, Providence, RI, USA.
|
28 |
AISC (2016a), Specification for structural steel buildings, American Institute of Steel Construction; Chicago, IL, USA.
|
29 |
AISC (2016b), Seismic provisions for structural steel buildings, American Institute of Steel Construction; Chicago, IL, USA.
|
30 |
Applied Technology Council (ATC) (1992), Guidelines for cyclic seismic testing of components of steel structures.
|
31 |
Ebrahimi, S., Mirghaderi, S.R. and Zahrai, S.M. (2019), "Proposed design procedure for gusset plate dimensions and force distribution at its interfaces to beam and column", Eng. Struct., 178, 554-572.
DOI
|
32 |
Goswami, R. and Murty, C.V.R. (2009), "Externally reinforced welded I-beam-to-box-column seismic connection", J. Eng. Mech., 136(1), 23-30.
DOI
|
33 |
Erfani, S., Asnafi, A.A. and Goudarzi, A. (2016), "Connection of I-beam to box-column by a short stub beam", J. Constr. Steel Res., 127, 136-150.
DOI
|
34 |
Fell, B.V. (2008), "Large-scale testing and simulation of earthquake-induced ultra-low cycle fatigue in bracing members subjected to cyclic inelastic buckling", Doctoral Dissertation; University of California at Davis.
|
35 |
Fell, B.V. and Kanvinde, A.M. (2010), "Tensile forces for seismic design of braced frame connections, Experimental results", J. Constr. Steel Res., 66(4), 496-503.
DOI
|
36 |
FEMA (2000), FEMA 351: Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment Frame Buildings, Federal Emergency Management Agency, Washington, DC, USA.
|