• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.8
• /
• pp.751-757
• /
• 2016

The aim of this study is to estimate the reliability of fatigue limit of the material used for crank throw components according to the staircase method. The material used for crank throw components is forged S34MnV grade steel, which is heat treated by normalizing and tempering. In this work, to predict the reliability of the design fatigue strength, axially loaded constant amplitude fatigue testing was conducted. The test specimens were loaded with an axial push/pull load with a mean stress of 0 MPa, which corresponds to a stress ratio of R=-1. The fatigue test results were evaluated by Dixon-Mood formulas. The values of mean fatigue strength and standard deviation predicted by the staircase method were 296.3 MPa and 10.6 MPa, respectively. Finally, the reliability of the fatigue limit in some selected probability of failure is predicted. The proposed method can be applied for the determination of fatigue strength for design optimization of the forged steel.

• Clean Technology
• /
• v.13 no.2
• /
• pp.151-158
• /
• 2007

An experimental study to investigate the condensing heat transfer characteristics of small diameter horizontal double pipe heat exchangers with R-22 and R-410A was performed. Experimental facility was constructed to calculate and observe HTC(heat transfer coefficients), flow patterns and pressure drop. The main components include a liquid pump, an evaporator, a condenser(test section), a sight-glass, pressure taps and measurement apparatus. Two pipes of different diameters are tested; One 5.35 mm ID 0.5 mm thick, the other 3.36 mm ID 0.7 mm thick. The mass flow rate ranged from 200 to $500\;ks/m^2{\cdot}s$ and heating capacity were form 1.0 to 2.4 kW. The flow patterns of R-22 and R-410A were observed with a high speed camera through the sight-glass. The tests revealed that HTC of R-410A was higher than that of R-22 by maximum 5%. Annular pattern was observed for the most cases but stratified flow was also detected when x<0.2. The pressure drop in 3.36 mm ID pipe was higher than that of 5.35 mm by $30{\sim}50%$. Comparing with previous correlations such as Shah, Fujii and Soliman's, Fujii' showed the best good agreement with my data with a maximum deviation of 40%.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.3
• /
• pp.211-214
• /
• 2006

Immobilized Candida antarctica lipase was used to catalyze the separation of ketoprofen into its components by means of esterification followed by the enzymatic hydrolysis of the ester product. In this study, ketoprofen underwent esterification to ethanol in the presence of isooctane. When the reaction was complete, 58.3% of the ketoprofen had been transformed into an ester. The ketoprofen remaining in solution after the reaction was complete consisted primarily of its S-enantiomer (83.0%), while the 59.4% of the ketoprofen component of the ester consisted of its R-enantiomer. We then subjected the ester product to enzymatic hydrolysis in the presence of the same enzyme and produced a ketoprofen product rich in the R-enantiomer; 77% of this product consisted of the R-enantiomer when 50% of the ester had been hydrolyzed, and 90% of it consisted of the R-enantiomer when 30% of the ester had been hydrolyzed. By contrast, the R-enantiomer levels only reached approximately 42 and 65%, respectively, when 50 and 30% of the racemic ester was hydrolyzed under the same conditions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.4
• /
• pp.121-133
• /
• 2020

This study aims to measure the result of R&D support projects on the beneficiary companies of the World Class 300 project, a representative domestic middle market enterprise incubation project. In particular, beneficiary companies were classified into industry groups(materials, components, equipment, modules, consumer goods) and the empirical study was conducted on how the result of R&D support project was differentiated by each industry group's characteristics. The analysis was performed on 272 companies selected as WC300 project during 2011 to 2017. The result of Panel regression Analysis confirmed that R&D support project had divergent influences on the performance (net profit) of companies depending on which industry group they belong. The samples of materials, components, equipment companies turned out not to have statistical significance. The samples of modules companies showed negative correlations, while those of consumer goods was observed to have positive correlations. This study demonstrates that it is essential to plan and implement policies suited to the characteristics of each industry groups to maximize the effect of R&D support projects henceforward.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.290-297
• /
• 2018

Electric drive technology is continually advanced to improve fuel efficiency in the automobile industry. It could improve the fuel efficiency of automobiles by 50% as well as agricultural machinery. The purpose of this study was to measure and analyze the power and current of an electric transplanter based on the planting distances during field operations. The electric transplanter was constructed by mounting the major components of a motor drive system onto a transplanter. The electric transplanter had a 3 kW motor power, and the major components included an inverter, battery, and a battery management system (BMS). The field tests were conducted by travelling at two speeds (300 and 760 mm/s) and by planting at three distances (260, 420 and 630 mm) with the working speed (300 mm/s), during travelling and transplanting. The results showed that the required power increased when the travelling speed was fast. One-way ANOVA for the planting distance and Duncan's multiple range test at a significance level of 0.05 were used to analyze the motor power using statistical analysis software. In addition, the required power increased when the planting distances were short at every working condition. The results of this study would provide useful information for the development an electric transplanter.

• Women's Health Nursing
• /
• v.20 no.1
• /
• pp.62-71
• /
• 2014

Purpose: This study investigated the effects of menopausal adaptation and Sanhujori (Korean traditional postnatal care) on the Health-related quality of life in middle-aged women. Methods: Women aged from 45 to 60 completed questionnaires consisting of SF-36 ver. 2 and menopausal adaptation scale between July to Aug, 2013. Two hundred and eighteen participants' data were analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient and multiple regression. Results: Physical health ($69.5{\pm}15.1$) was better than mental health ($68.8{\pm}17.1$), and bodily pain and social functioning were the same results as 2009 general U.S. population, with the sub-variables of quality of life being lower. Menopausal adaptation was at moderate level, and correlation of its sub-variables with quality of life were significant: fatigue (r=.60, p<.001), accomplishing feeling (r=.55, p<.001), confidence (r=.54, p<.001), dryness (r=.51, p<.001), flush (r=.38, p<.001), dominance (r=-.36, p<.001), stability (r=.26, p<.001). Fatigue, confidence, stability, period of sanhujori, and dryness revealed as influencing quality of life, while the total variation explained by these components was at 52%. Conclusion: To improve quality of life of middle aged women, health care providers need to provide nursing intervention to relieve fatigue and dryness; and address psychosocial concerns with developing nursing strategies to improve stability and confidence. For post-partum women, enough periods of sanhujori needs to be recommended.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.2
• /
• pp.235-239
• /
• 2003

The silkworm Bombyx mori L. was studied as the potential “host” of popular in Uzbekistan biocontrol ectoparasite, entomophagous Bracon hebetor Say. Being one of representatives of economic-beneficial insects, the silkworm (larvae, pupae and imago) can be used as highly sensitive test organism for revealing of neuro toxic effects of insects venom as well as of their purified components in screening assays. In comparative aspect, except a mulberry silkworm, representatives of Uzbekistan pests cotton-boll worm Helycoverpa armigera Hbn., lesser mulberry pyralid Glyphodes pyloalis Wlk., codling moth Corpocapsa pomonella L., malaria mosquito Anopheles claviger and Colorado potato beetle Leptinotarsa decemlineata Say have been subjected to insect toxic test of bracon venom gland extract (VGE) and its fractions which were obtained by gel-chromatography on Sephadex G-100. The paralyzing effect of the VGE and its fractions was shown in a various degree on the pests.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.168-173
• /
• 2000

Anticariogenic activity of the unripe apple extract was studied by observing the inhibitory effects on GTase(glucosyltransferase) activity, cell adherence and acid production of Streptococcus mutans. Among the four S. mutans strains, S. mutans MT 8148 had the highest water-insoluble glucan forming activity. (+)-Catechin and tannic acid, the major components of the unripe apple polyphenols inhibited GTase activity by 60% at 1 mg/ml and 90% at 5 mg/ml. Tannic acid and unripe apple extract inhibited adherence ability of S. mutans by 50% and 30%, respectively. But the acid production of S. mutans was not influenced by the polyphenols. Disc diffusion test showed that the polyphenols have no antimicrobial activity against S. mutans, which indicates that the inhibition of GTase activity and cell adherence were not resulted from the cell growth inhibition. Our results convinced the possible application of the unripe apple extract as the anticariogenic food additives.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.2
• /
• pp.191-201
• /
• 2007

It was noted by the several researchers that the voltage outputs in response to a single yawed hot-wire sensor in a flow perpendicular to the axis deviate from the theoretical voltage output by King's law and Jorgensen's relation. This study noticed that the calibration coefficients of original Grande's method are not constant and fairly sensitive to the radial angle (${\alpha}_{R}$). For more accuracy, this study interpolated the parameters of the Grande relation as a function of radial angle and compared velocity components with ones by Jorgensen and original Grande relation in the calibration jet flow. Finally, as a test case, 3-dimensional turbulent flows of the inlet plane of 180 degree bend are measured and compared the velocity components by above three methods and showed the characteristics of the flows.

• YAKHAK HOEJI
• /
• v.41 no.4
• /
• pp.439-443
• /
• 1997

From the root bark of Broussonetia kazinoki (Moraceae) two antioxidant components were identified. Their structures were determined as kazinol A (1) and kazinol E (2) (is oprenylated flavan and isoprenylated 1,3-diphenyl propan derivatives) by comparing NMR data with those of the reported compounds from relative plants. The antioxidant activity of 1 and 2 were monitored by the method of DPPH radical scavenging activity, whose $SC_{50}$ values were $41.4{\mu}M\;and\;33.4{\mu}M$, respectively. These compounds also exhibited inhibitory activity against tyrosinase, which is the sole key enzyme for the melanin biosynthesis and play a role in conversion of tyrosine to dopa, and dopa to dopaquinone. The antioxidant effect and the suppression of melanin biosynthesis are useful for anti-aging, increasing vitality in the incidence of major degenerative diseases, and cosmetic products in relation to hyperpigmentation.