• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제16권1호
• /
• pp.1-11
• /
• 2009

The notion of a BCK-algebra with supremum (briefly, sBCK-algebra) is introduced, and several examples are given. Related properties are investigated. We show that every sBCK-algebra with an additional condition has the condition (S). The notion of a dry ideal of an sBCK-algebra is introduced. Conditions for an sBCK-algerba to be an spBCK-algebra are provided. We show that every sBCK-algebra satisfying additional condition is a semi-Brouwerian algebra.

• 대한가정학회지
• /
• 제34권3호
• /
• pp.259-269
• /
• 1996

The purpose of this study was to investigate on wear performance of four type of stocking: support, mono, panty, bane stocking. Major results are as follows; 1)The most subjects tended to be unsatisfied on wear performance of stocking. 2)Generally, the subjects tend to more satisfied support stocking than mono, and panty stocking than band. 3)It showed that ideal sensory sensation on wearing of stocking were d dry, softness, fittness. 4)It showed that ideal visible sensationon on wearing of stocking were thinness, refresh feeling, attractiveness, commonness

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.97-104
• /
• 2015

An electric-motor which uses electric energy to dry laundry in a dryer generates wind by rotating a fan. The roles of electric motor and fan are crucial for drying. To reduce the noises or vibration, their performances should be improved. However, it requires a relatively high cost to redesign them. In this case, redesigning the fan case rather than the motor or the fan would be easier and cheaper. This paper is to apply Taguchi dynamic characteristic concept with the ideal function of energy conversion to redesign the fan case. Not only the increase of the wind power but also the decrease of noise, vibration and the other side effects are resulted.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.205-214
• /
• 2021

Currently, the interim storage pools of spent fuels in South Korea are expected to become saturated from 2024. It is required to prepare an operation plan of a domestic dry storage facility during a long-term period, with the researches on safety evaluation methods. This study modified the FRAPCON code to predict the spent fuel integrity evaluation such as the axial cladding temperature, the hoop stress and hydrogen distribution in dry storage. The cladding temperature in dry storage was calculated using the COBRA-SFS code with the burnup information which was calculated using the FRAPCON code. The hoop stress was calculated using the ideal gas equation with spent fuel information such as rod internal pressure. Numerical analysis method was used to calculate the degree of hydrogen diffusion according to the hydrogen concentration and temperature distribution during a dry storage period. Before 50 years of dry storage, the cladding temperature and hoop stress decreased rapidly. However, after 50 years, they decreased gradually and the cladding temperature was below 400 K. The initial temperature distribution and hydrogen concentration showed a parabolic line, but hydrogen was transferred by the hydrogen concentration and temperature gradient over time.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4388-4397
• /
• 2015

이 연구는 아크릴 수지의 유도광선변화에 따른 속성 변화를 연구하여 최적의 특성을 가진 아크릴 수지를 개발할 수 있도록 건열 및 마이크로파 경화 의치상 아크릴 수지의 향상된 물성에 대한 연구이다. 굽힘강도와 경도, 색차를 관찰한 결과 Vertex RS 및 Paladent 20는 건식 열 경화 시편 5, 15, 25 kGy의 조사에 이상적인 속성을 보였다. 마이크로 웨이브 경화에서는 5 kGy의 조사에서 이상적인 속성을 보였다. 상관관계 분석은 ARD와 굴곡 강도 (0 418), E 계수 (0.675), 및 바콜 경도 (0 588) 사이의 긍정적인 상관관계를 보여 주었다. 방사선 경화형 기술은 고분자 복합 재료의 제작으로 인한 오염 문제를 완화하는 데 도움이 될 수 있으며 고분자의 가공성에 영향을 주지 않고 자외선 경화 기술과 나노 기술 융합 및 기계적 특성의 향상에 크게 기여할 수 있다.

• Computers and Concrete
• /
• 제31권6호
• /
• pp.501-511
• /
• 2023

The strengthening efficiency of biopolymer treated soil depends on biopolymer type, concentration ratio, soil type, initial water content, curing time and mixing method. In this study, the physical and mechanical properties of xanthan gum (XG) treated kaolinite were investigated through compaction test, Atterberg limit test, triaxial test and unconfined compression test. The results indicated that the optimum water content (OWC) increased from 30.3% of untreated clay to 33.5% of 5% XG treated clay, while the maximum dry density has a slight increase from 13.96 kg/m³ to 14 kg/m³ of 0.2% XG treated clay and decrease to 2.7 kg/m³ of 5% XG treated clay. Meanwhile, the plastic limit of XG treated clay increased with the increase of XG concentration, while 0.5% XG treated clay can be observed the maximum liquid limit with 79.5%. Moreover, there are the ideal water content about 1.3-1.5 times of the optimum water content achieving the maximum dry density and curing time to obtain the maximum compressive strength for different XG contents, which the UCS is 1.52 and 2.07 times of the maximum UCS of untreated soil for 0.5% and 1% XG treated clay, respectively. In addition, hot-dry mixing can achieve highest UCS than other mixing methods (e.g., dry mixing, wet mixing and hot-wet mixing).

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.283-300
• /
• 2004

This paper describes the NC simulator system for Wire-cut electrodischarge machining. Electrodischarge Wire-cut machining is applicable to all materials including metals, alloys, and most carbides. Although CAM system generate the NC code considering electrodischarge conditions, incorrect Wire-cut tool path bring about fatal results. The simplest way of simulating a EDM process is to display the trajectory of Wire-cutter location by line segments. With this kind of simulation, the programmer can get a general idea about whether the wire is moving as planned but cannot locate gouging or excess material because only the wire location will be seen, not the changes in the workpiece as it is machined. The ideal way of simulating the EDM process is to display the solid model of the workpiece as it is machined. Therefore we propose the ideal NC simulator system for Wire-cut EDM.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.285-290
• /
• 2003

This paper describes the NC simulator system for Wire-cut electrodischarge machining. Electrodischarge Wire-cut machining is applicable to all materials including metals, alloys, and most carbides. Although CAM system generate the NC code considering electrodischarge conditions, incorrect Wire-cut tool path bring about fatal results. The simplest way of simulating a EDM process is to display the trajectory of Wire-cutter location by line segments. With this kind of simulation, the programmer can get a general idea about whether the wire is moving as planned but cannot locate gouging or excess material because only the wire location will be seen, not the changes in the workpiece as it is machined. The ideal way of simulating the EDM process is to display the solid model of the workpiece as it is machined. Therefore we propose the ideal NC simulator system for Wire-cut EDM.

• 대한인간공학회지
• /
• 제15권1호
• /
• pp.91-103
• /
• 1996

For determining thermal comfort properties of work suit in an atomic power plant, three different coverall ensembles (PVE, PET/Rayon, PP Nonwoven) were selected and the resistance to dry and evaporative heat transfer were measured for each ensemble by using a sweating thermal manikin. Also, PMV (Predicted Mean Vote) and PPD(Predicted Percentage of Dissatisfied) indices were predicted according to ISO 7730. As a result, ideal environmental conditions in an atomic power plant were suggested to make workers feel thermally comfortable. In addition, ideal intrinsic insulation values of coverall ensembles as a work suit under the present environmental conditions in the at6omic power plant were provided. The information given in this paper can be used to control environmental conditions in the atomic power plant thermally comfortable and to select a proper work suit for providing thermal comfort to the workers.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 추계 총회 및 학술발표회
• /
• pp.73-74
• /
• 1997

1. 서론 : 공기중의 산소와 질소를 분리하여 공기 중에 21% 함유된 산소를 보다 높은 농도(21%이상)로 농축하기 위한 기초자료로서 건조 산소(dry O$_2$)와 건조 질소(dry N$_2$)의 투과도를 측정하였다. 그러나 공기중에는 항상 수분이 포함되어 있으므로 공기 중에 함유된 수분(water vapour)에 의한 산소 투과도와 질소 투과도의 변화를 측정하기 위하여 상대숩도 및 압력차이에 따른 영향을 고찰하였다. 그리고 분리막공정에서 순수기체의 막에 대한 투과도를 알 수 있다면 기체 혼합물에 대한 이상분리인자(ideal separation factor)를 알 수 있으며, 이를 이용하여 분리막의 분리 성능 예측이 가능하므로 투과도 예측식을 얻는다는 것은 매우 중요하다. 본 연구에서는 counter-current model을 이용하여 기체 혼합물의 투과도를 예측하고 실험치와 비교하였다.