• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1660-1662
• /
• 1996

Superconducting current lead is one of the promising applications of the oxide high-Tc superconductors, because they have the advantage of decreasing heat conduction to low temperature region, comparing with a conventional cooper alloy lead. High critical current density is a key factor for the applications such as current lead. $(Bi,Pb)_{2}Sr_{2}Ca_{2}Cu_{3}O_{x}$ high Tc superconductor hase been investigated in terms of critical current density. Bi-2223 superconducting current lead made by CIP and solid state sintering process. Bi-2223 current lead that heat treated at $836\;^{\circ}C$ for 240 h in 1/13 $PO_2$ had over $500\;A/cm^2$ of critical current density at 77K. We knew that the superconducting properties of tube type current leads were better than rods type of them. And we investigated the relation of Bi-2223 formation and heat treatment condition by XRD and SEM analysis.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.82.2-82.2
• /
• 2007

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1104-1109
• /
• 2001

110K상의 산화물 고온초전도체를 B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+}$$\delta$/의 출발조성비로 고상반응법(solid-state reaction)에 의해 합성하였다. 이렇게 합성된 Bi계 110K상의 산화물 고온초전도 물질을 다시 분말 상태로 만든 후, Ag 금속분말을 10wt%, 30wt%, 50wt%의 각 비율로 혼합하였다. Ag 금속분말이 혼합된 시편들을 86$0^{\circ}C$~875$^{\circ}C$로 24시간 동안 최종 소결시켰다. 그후, 각 시편들에 대하여 x-선, $T_{c}$, SEM 등을 측정하여 Ag 혼합량에 대한 초전도특성 및 표면의 grain 크기변화 등에 대한 조사를 진행하였다. Ag 혼합량이 증가됨에 따라 Ag peak의 강도는 증가되었고, 시편 내 2223 상의 비율은 감소하고 2212상의 비율은 증가되었다.비율은 증가되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 1996

Superconducting current lead is one of the promising applications of the oxide high-Tc superconductors, because they have the advantage of decreasing heat conduction to low temperature region, comparing with a conventional cooper alloy lead. High critical current density is a key factor for the applications such as current lead. (Bi,Pb)$_2$Sr$_2$Ca$_2$Cu$_3$O$\_$x/ high Tc superconductor haute been investigated in terms of critical current density. Bi-2223 superconducting current lead made by CIP and solid state sintering process. Bi-2223 current lead that heat treated at 836$^{\circ}C$ for 240 h in 1/13 P$\_$O$_2$/ had over 150 A/$\textrm{cm}^2$ of critical current density at 77K. We knew that the superconducting properties of tube type current leads were better than rods type of them. And we investigated the relation of Bi-2223 formation and heat treatment condition by XRD and SEM analysis.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.664-670
• /
• 1998

고순도의 Bi(Pb)-Sr-Ca-Gu-O 초전도 분말의 얻기 위하여 액상법의 하나인 이멀젼 건조방법이 응용되었다. 다양한 합성 변수 중 오일과 용액의 계면활설제의 혼합비율을 조정하여 고순도의 Bi(Pb)-Sr-Ca-Gu-O 초전도 분말을 성공적으로 얻을 수 있었다. 이 공정의 최적 혼합비율은 70:20:10이였다. 관측된 분말을 구형이었으며 마이크론 크기 이하의 균일한 크기를 보였다. 최적의 소결조건에 한에 $840^{\circ}C$ 50시간의 열처리를 통하여 거의 108K를 갖는 초전도 분말이 얻어졌다.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.247-253
• /
• 2000

We evaluated the electric properties of Bi-2223 jointed tapes processed by both resistive-and superconducting-joint methods. For resistive-joint. filler materials of wood metal Pb/Sn. In and silver paste were used whereas for superconductive-joint lap joint method was used. In the resistive joint tape. critical transport property(CCR) n-value and contact resistance were observed to be in the range of 10-85% 1-8,9. and 0.71x10$\^$-6/-0.13x10$\^$-6/Ω, respectively. depending on their filler materials. Specifically it is believed that the electrical properties of resistive joint tape are significantly related to the resistivity of filler materials. On the other hand the CCR of superconductin joint type was varied 55 to 85% with uniaxial pressure probably due to the irregular microstructure in the transition region.

• 한국세라믹학회지
• /
• 제34권10호
• /
• pp.1083-1091
• /
• 1997

반응성이 좋은 미분말의 고온 초전도상을 얻고자 액상 합성법 중의 하나인 옥살산염법을 이용하였다. 본 방법을 사용하여 합성 분체의 초기 형상과 입도를 제어하였고, 개선된 균일성을 가진 Bi(Pb)-Sr-Ca-Cu-O 초전도 분말을 제조할 수 있었다. 합성된 산화물 초전도체 분말의 특성 및 pellct으로 성형후 열처리한 시편의 미세구조와 전기적특성을 조사하였다. 또한, Tape casting법에 의해 후막을 제작하여 미세구조와 전기적 특성을 관찰하였다. 합성된 분말의 입자 크기는 100~300nm 이하의 구형이었으나 대부분이 1~3 ${\mu}{\textrm}{m}$ 크기로 응집되어 있었다. 84$0^{\circ}C$로 72시간 동안 열처리한 괴상 시편의 임계저항온도는 110K였으며, 열처리한 후막의 임계전류는 각각 0.6A, 1.9A였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.300-304
• /
• 1999

To tap the feasibility of exploiting the 2$^{nd}$ phases as flux-pinning centers in the (Bi,Pb)$_2Sr_2Ca_2CuO_{10}$ superconductor, the size and the distribution of the precipitates have been controlled by changing reaction temperature and time, oxygen partial pressure Po$_2$ and annealing condition. Various annealing heat treatments were also conducted on the as-received 61 filament Bi-2223 tapes with Bi$_{1.8}Pb_{0.4}Sr_2Ca_{2.2}Cu_3O_8$ starting composition and annealed specimen were analyzed with XRD, SEM, EDS and TEM.. The grain size of (Ca,Sr)$_2$(BiPb)O$_4$ or Bi$_{0.5}Pb_3Sr_2Ca_2CuO_{\delta}$ was controllable by optimizing the heat treatment condition and critical current density (J$_c$) showed dependence on the size of the 2$^{nd}$ phases.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.188-192
• /
• 2002

To introduce flux pinning center in HTS-BSCCO system, nano-size MgO particles were uniformly distributed within the Bi-2223 grain by partial hydration of MgO. The existing method MgO doped Bi-2223 used nato-size MgO powders, which resulted in agglomeration during mixing or grain growth during heat-treatment due to the high surface energy of the fine particles. By hydration of the MgO surface, the agglomeration of the MgO powders was avoided and the size of remaining MgO core was controlled by changing hydration medium and time. The thin film obtained by spin coating of (Bi_$1.8/Pb_{0.4}$)$Sr_2$$_{Ca}$$2.2/Cu_3$ $O_{y}$ nitrate solution mixed with hydrated MgO showed the even distribution of nano-size MgO particles in the Bi-2212 grains.s.s.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.349-352
• /
• 1998

In future superconducting electrical machines and device. AC loss in the superconducting windings are one of the most impotent design paramenters. This paper descriptions a series of Characteristic of a high-Tc superconducting Bi-Pb-Sr-Ca-Cu-O Ag-sheathed filament. In the case simulation and design to reduce ac loss is considered the filament number, twitch pith number and diameter of filament. A filament sample with Tc of 78K is made by $835^{\circ}C$ sintering for 50h and $0.33^{\circ}C$/min heating rate in an atmosphere. The experiment observations are compared with self-field loss and AC losses of Bi-Pb-Sr-Ca-Cu-O filament at 77K in following environments ; (i)AC external parallel magnetic field in different frequencies. And an analytical expression of the loss the derivation of transposition from an optimum condition was derived for the external AC magnetic field, theoretical predictions were found to coincide with the experimental observations.