• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.78.1-78.1
• /
• 2012

비 휘발성 저항 메모리소자인 resistance random access memory (ReRAM)는 빠른 동작특성과 저 전압 특성을 나타내고 비교적 간단한 소자구조로 고집적화에 유리하여 기존의 DRAM과 flash 메모리, SRAM 등이 갖고 있는 한계를 극복할 수 있는 차세대 메모리소자로써 각광받고 있다. 현재, 이성분계 산화물, 페로브스카이트 산화물, 고체 전해질 물질, 유기재료 등을 응용한 저항 메모리소자에 대한 연구가 활발히 진행되고 있다. 그 중 ZnO 를 기반으로 하는 amorphous InGaZnO (a-IGZO) 박막은 저온에서 대면적 증착이 가능하며 다른 비정질 재료에 비해 높은 전하 이동도를 갖기 때문에 박막트랜지스터 적용 시 우수한 전기적 특성을 나타낸다. 또한 빠른 동작특성과 높은 저항 변화율을 보이기 때문에 ReRAM에 응용 가능한 재료로써 기대되고 있다. 본 연구에서는 MOM(metal/oxide/metal) 구조를 기반한 TiN/a-IGZO/ITO 구조의 소자를 제작하여 저항 메모리 특성을 평가하였다. IGZO 박막은 radio frequency (RF) sputter 를 이용하여 ITO/glass 기판 위에 증착하였다. MOM 구조를 위한 상부 TiN 전극은 e-beam evaporation 을 이용하여 증착하였다. 제작된 저항 메모리소자는 안정적인 unipolar resistive switching 특성을 나타내었으며, TiN 상부전극과 IGZO 계면 간의 Transmission Electron Microscopy (TEM) 분석을 통해 전압 인가 후 전극 금속 물질의 박막 내 삽입으로 인한 금속 필라멘트의 형성을 관찰 할 수 있었다. 합성된 박막의 형태와 결정성은 Scanning electron microscope (SEM)와 X-ray Diffraction (XRD)을 통해 평가 하였으며, 제작된 소자의 전기적 특성은 HP-4145 를 이용하여 측정하고 비교 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.191.1-191.1
• /
• 2013

현재 산업계 전반적으로 사용되고 있는 박막형 태양전지 투명 전도막의 재료로는 ITO 와 Al, In, Ga, B, Si, F 등으로 도핑된 ZnO 박막이 사용되고 있으며, 그 중에서도 Al 이 도핑된 ZnO 박막은 넓은 밴드갭을 가진 n-type 반도체로서, 적외선 및 가시광 영역에서의 높은 투과성과 우수한 전도성을 가지며, 고온에서 안정된 전기적 특성, 낮은 원가 등의 장점을 지녀 그 응용 연구가 활발히 이루어지고 있다 [1]. 본 연구에서는 RF magnetron Sputter 법을 이용하여 Flexible 기판 위에 AZO 박막을 증착하였다. 실험변수로는 RF power, Pressure등을 이용하였고, 최적조건에서의 박막의 투과도는 90%이상, 면저항은 30 ${\Omega}/{\square}$ 이하를 나타내었다. 그리고 (주)인포비온에서 원천기술을 갖고있는 EBA technology를 이용하여 후처리 하여 전기적, 광학적, 구조적인 특성의 변화를 관찰하였다. AZO 박막의 두께를 측정하기 위해 ${\alpha}-step$과 SEM을 이용하였고, 투과도는 UV-Vis spectrometer를 사용하여 박막의 투과도 변화를 관찰 하였다. 전기적인 특성은 4-Point probe를 이용하여 측정하였다. 또한, 박막의 결정성과 거칠기의 변화는 XRD(X-ray Diffraction)와 원자간력현미경(Atomic Force Microscope; AFM) 을 이용하여 측정하였으며, 전기 광학적 특성 변화는 Figure Of Merit(FOM) 수치로 분석하였다. 본 연구에서 AZO 박막의 특성은 EBA 조사 후 특성의 향상이 이루어지는 것을 관찰할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.11-11
• /
• 2008

ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.23-27
• /
• 2008

We have investigated the effect of annealing on the structural and optical properties of polycrystalline Ga doped ZnO (GZO) films grown on glass substrates by RF-magnetron sputter at room temperature. The structural and optical properties of as-grown GZO films were characterized and then samples were annealed at $400{\sim}600^{\circ}C$ in $N_2$ ambient for 30, 60 minutes, respectively. The field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) were used to measure the grain size and the crystalline quality of the films. We found that the crystalline quality was improved and the grain size tends to be increased. The optical properties of GZO thin films were analyzed by UV-VIS-NIR spectrophotometers. It is found that optical properties of thin films are increased by annealing and can be used for transparent electrode application. We believe that the appropriate post-growth heat treatment could be contributed to the improvement of GZO-based devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.11-11
• /
• 2010

Thin-film-transistors (TFTs) that can be deposited at low temperature have recently attracted lots of applications such as sensors, solar cell and displays, because of the great flexible electronics and transparent. Transparent and flexible transistors are being required that high mobility and large-area uniformity at low temperature [1]. But, unfortunately most of TFT structures are used to be $SiO_2$ as gate dielectric layer. The $SiO_2$ has disadvantaged that it is required to high driving voltage to achieve the same operating efficiency compared with other high-k materials and its thickness is thicker than high-k materials [2]. To solve this problem, we find lots of high-k materials as $HfO_2$, $ZrO_2$, $SiN_x$, $TiO_2$, $Al_2O_3$. Among the High-k materials, $Al_2O_3$ is one of the outstanding materials due to its properties are high dielectric constant ( ~9 ), relatively low leakage current, wide bandgap ( 8.7 eV ) and good device stability. For the realization of flexible displays, all processes should be performed at very low temperatures, but low temperature $Al_2O_3$ grown by sputtering showed deteriorated electrical performance. Further decrease in growth temperature induces a high density of charge traps in the gate oxide/channel. This study investigated the effect of growth temperatures of ALD grown $Al_2O_3$ layers on the TFT device performance. The ALD deposition showed high conformal and defect-free dielectric layers at low temperature compared with other deposition equipments [2]. After ITO was wet-chemically etched with HCl : $HNO_3$ = 3:1, $Al_2O_3$ layer was deposited by ALD at various growth temperatures or lift-off process. Amorphous InGaZnO channel layers were deposited by rf magnetron sputtering at a working pressure of 3 mTorr and $O_2$/Ar (1/29 sccm). The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. The TFT devices were heat-treated in a furnace at $300^{\circ}C$ and nitrogen atmosphere for 1 hour by rapid thermal treatment. The electrical properties of the oxide TFTs were measured using semiconductor parameter analyzer (4145B), and LCR meter.