• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.137-147
• /
• 1993

Terrain is on of the most important factors in the selection of defense areas. The objective of the study is selection optimum defense area between Seoul and Dongducheon using GIS technique. The contents of the study are: (1) to select the defense area by pure terrain factors, (2) to select the defense area with focusing on the avenues of approach, and (3) to compare the above two kinds of area. The study area is located in the northeastern part of Seoul metropolitan area. It is part of Choogaryung Rift Valley which is running from Seoul to Wonsan. Six factors are considered for the selection: tactical distance, direction, elevation, slope, aspect and the distance from main roads. The defense score of each area is calculated by the multiplication of scores of each factors. The optimum defense area I consists of high-mountain areas such as Mt. Dobong, Mt. Wan-gbang, etc. The optimum defense area II consists of high-mountain areas along the three main roads selected. An east-west line of optimum defense area from Kuksabong in the east to Mt. Bulkuk in the west through Chookseok pass is identified from the spatial pattern of the area II. The line is also a dividing line between the northern and the southern watersheds.

• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.329-335
• /
• 2001

Recently, in many laboratories and institutes it is being studied on the high flowing concrete widely, which has high fluidity, non-segregation ability and fillingability, and sometimes being applied to the construction field actually. And the fluidity properties of high flowing concrete are influenced according to the several factors ; binder content, water/binder ratio and water content etc. This is an experimental study to compare and analyze the effect of water/binder ratio and water content on the properties of high flowing concrete. For this purpose, the mix proportion of high flowing concrete according to water/binder ratio(W/B : 0.30, 0.35, 0.40, 0.45) and water content (W : 155, 165, 175, 185 kg/㎥) was selected. And then slump-flow, V-lot, L-passing test in fresh concrete, and compressive strength, freezing and thawing test in hardened concrete were peformed. According to test results, it was found that the viscosity of all those high flowing concrete with the water content 175 kg/㎥ was satisfied with 50 cm pass time of slump flow prescribed by Japanese Architectural Standard Specification (JASS 5) - from 3 to 8 seconds. And non-segregation ability of concrete with W/B 0.35 was better than the other mix proportions. Especially, the compressive strength after curing 24 hours(1 day) of all high flowing concrete was higher than that prescribed by JASS 5(50 kgf/㎠).

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.6
• /
• pp.1053-1063
• /
• 2011

Social network analysis is the social statistical analysis of any social structure involving a stream of mutual information between observations. In this study we used the results of passes between players in a soccer game. The analysis contents are as follows. (1) Players with important or leading roles are identified. (2) Players are assessed by pass frequency and the success rate of passes. The purpose of this study is for use as basic data for future team strategy, and achieves this by evaluating the role of each individual player within a team. In this study, social network analysis without separating positions is conducted, and is also performed for defensive and attacking positions respectively. The results of this study are as follows: First, when complete team data were available, the players performing leadership roles were Jung-woo Kim, Sung-yeung Ki and Chung-young Lee, whereas Jeong-su Lee acted as a sub-leader. In case of data for defensive positions Jeong-su Lee was a leading player, and in terms of attacking positions, all of the players excelled in the game and could be evaluated as playing lead roles.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.6
• /
• pp.631-637
• /
• 2006

Background: Patients with COPD generally complain of very different degrees of dyspnea regardless of their pulmonary function. The study, we assessed the right ventricular ejection fraction in relation to dyspnea in COPD patient. Methods: The pulmonary function including the diffusion capacity was measured. The right ventricle ejection fraction (RVEF) was measured using a first-pass radionuclide scan by multigated acquisition (MUGA). Forty patients with chronic obstructive pulmonary disease (COPD) were stratified for dyspnea according to the Medical Research Council (MRC) scale. Moderate dyspnea and severe dyspnea is defined as MRC 2/3 (n = 16) and MRC 4/5 (n = 24) respectively. Results: The baseline pulmonary function tests including DLCO and the resting arterial blood gas were similar in the moderate and severe dyspnea group, with the exception of the residual volume (% predicted) (moderate $160{\pm}27$, severe $210{\pm}87$, p < 0.03). The right ventricle ejection fraction was significantly (p < 0.001) lower in the severe dyspnea group ($25{\pm}8$) than in the moderate group ($35{\pm}6$). The independent factor assessed by multiple logistic regression revealed only the severity of dyspnea to be significantly associated with RVEF (p < 0.02). Conclusion: This study showed that the right ventricle ejection fraction would contributes to severity of dyspnea in patients with a similar pulmonary function.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.79-86
• /
• 2012

An economic ship routing means to sail a ship with a goal of minimizing the fuel consumption by utilizing weather forecast information, and various such systems have been recently studied. For a successful economic ship routing system, an efficient algorithm is needed to search an optimal geographical path, and most of the previous systems were approaching to that problem through a minimal static-cost path search algorithm based on the Dijkstra algorithm. To apply that kind of search algorithm, the cost of every edge assigned with the estimated fuel consumption should be constant. However, that assumption is not practical at all considering that the actual fuel consumption is determined by the weather condition when the ship will pass the edge. To overcome such a limitation, we propose a new optimal ship routing system based on a minimal dynamic-cost path search algorithm by properly modifying the Dijkstra algorithm. In addition, we propose a method which efficiently reduces the search space by using the $A^*$ algorithm to decrease the running time. We compared our system with the shortest path-based sailing method over ten testing routes and observed that the former reduced the estimated fuel consumption than the latter by 2.36% on average and the maximum 4.82% with little difference of estimated time of arrival.

• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.147-156
• /
• 2011

This paper proposes a 3-stage (preprocessing, feature extraction, and classification) fault detection and classification algorithm for induction motors. In the first stage, a low-pass filter is used to remove noise components in the fault signal. In the second stage, a discrete cosine transform (DCT) and a statistical method are used to extract features of the fault signal. Finally, a back propagation neural network (BPNN) method is applied to classify the fault signal. To evaluate the performance of the proposed algorithm, we used one second long normal/abnormal vibration signals of an induction motor sampled at 8kHz. Experimental results showed that the proposed algorithm achieves about 100% accuracy in fault classification, and it provides 50% improved accuracy when compared to the existing fault detection algorithm using a cross-covariance method. In a real-world data acquisition environment, unnecessary noise components are usually included to the real signal. Thus, we conducted an additional simulation to evaluate how well the proposed algorithm classifies the fault signals in a circumstance where a white Gaussian noise is inserted into the fault signals. The simulation results showed that the proposed algorithm achieves over 98% accuracy in fault classification. Moreover, we developed a testbed system including a TI's DSP (digital signal processor) to implement and verify the functionality of the proposed algorithm.

• Applied Microscopy
• /
• v.5 no.1
• /
• pp.9-19
• /
• 1975

In order to clarify the mecahnism of histological barriers to pathogens of witches' broom diseased in sweet potatoes, this experiment has been conducted to observe the relationship between pathological characters and the transfer of mycoplasmae in the shoot apex. The material used the experiment is the sweet potato (Ipomoea batatas (L.) Lamm. Suwon 147). In the experiment regarding of mycoplasmae, the upper limit zone of transfer of mycoplasmae is examined by way of the process of free stock and the shoot apex of a infected part in nature, observed in the culture of each part of the diseased plant which is cut to a certain length. The pathological change pattern of tissues infected with mycoplasmae has been observed under the light and electron microscopes. As a result of this experiment, the following conclusion was arrived at. 1. It has been ascertained that the mycoplasmae are not existent in a promeristem and primary meristem zone from the meristem dome, and is existent in the lower part of the vascular differentiation zone, after which differential tissues the mycoplasmae become progressively enlarged, and before which undifferential tissues it become progressively immatured and diminished in size. 2. It can be suggested that mycoplasmae may not be existed in the shoot meristem, be cause the passing structures such as sieve area and plasmodesma which can be pass ed immatured mycoplasmae is undifferentiated. 3. In the tissue culture, free stock can be obtained in the zone between 1.0-1.5mm of the shoot apex, while it cannot in the 2.0-3.0mm zone, because of infection by mycoplasmae. It is suggested that immature mycoplasmae may be diffused according to temperature ($28{\pm}1^{\circ}C$) in tissue culture process.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.111-120
• /
• 2013

As craft is representing the historical culture of one country based on the old cultural characteristics and traditions of the regions in our life and is also representing the contemporary cultural culture, the interest in the crafts is becoming bigger and bigger as days pass by. However, despite this potentiality for growth, the craft that we encounter is not reflecting the ever-changing environment of the times, is failing to go beyond the folk art industry level of 1970s to 1980s. Although most of the industrial craft corporations have highly developed craft technology, but the products are not sublimated into marketable products. Also, so far schemes for development of industrial craft have not been many and studies on industrial craft in a sense of the design management have not been performed. Accordingly, this study intends to survey the effect of the design management strategy on the industrial craft product purchase intention in the industrial craft. The main contents comprehended in the study process are as follows. The design management strategy affects the industrial craft product purchase intention. Among the lower elements of the design management strategy, which are cost reduction-oriented design strategy, image-oriented design strategy and the market-oriented design strategy, the image-oriented design strategy and the market-oriented design strategy showed to affect the industrial craft product purchase intention. Especially, the image-oriented design strategy showed to affect the industrial craft purchase intention more than the market-oriented design strategy does.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.55-62
• /
• 2005

Recently, the opening of the world economy and regional ization of national demand endless endeavors and investments to upbring design-industry for regional economic development. Our domestic commodities, declined in price competitiveness against China and Southeast Asian nations, need construction of brand image of commodities and consumers' response through expanded concernments in marketing spheres. The design-industry is a important means to strengthen competitiveness of the domestic industry through discrimination of commodities and creativity of high added value. Design-industry has some problems in circumstances; commodity development and marketing are below the level in the sphere of manufacture industry yet and businessmen are unwilling to invest demanded for development of new design. Establishment of the personal foundation, useful for accumulating competent designers' experiences and technologies, can not pass limit. In addition, a system and a policy to protect design-industry have a problem in effectiveness. Concrete strategies to activate design industry which meets social and cultural circumstances of Daegu and Gyeongbuk region are to establish policy for construction of specialists' infra, systematization of study & development of design, common ownership of information on design, and expansion of design company. The business to upbring design in the region should be operated to develop competitive commodities which is helpful to the regional economy and to increase value of the regional enterprises' brand. In addition, foundation of design should be expanded personal, material, and informational infra through design-centered so that they are helpful to activate economy of Daegu and Gyeongbuk through making design reformational cluster.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.119-128
• /
• 1998

This paper describes a filtering algorithm which employs apriori information of SPECT lesion detectability potential for the filtering of degraded projection images prior to the backprojection reconstruction. In this algorithm, we determined m minimum detectable lesion sized(MDLSs) by assuming m object contrasts uniformly-chosen in the range of 0.0-1.0, based on a signal/noise model which provides the capability potential of SPECT in terms of physical factors. A best estimate of given projection image is attempted as a weighted combination of the subimages from m optimal filters whose design is focused on maximizing the local S/N ratios for the MDLS-lesions. These subimages show relatively larger resolution recovery effect and relatively smaller noise reduction effect with the decreased MDLS, and the weighting on each subimage was controlled by the difference between the subimage and the maximum-resolution-recovered projection image. The proposed filtering algoritym was tested on SPECT image reconstruction problems, and produced good results. Especially, this algorithm showed the adaptive effect that approximately averages the filter outputs in homogeneous areas and sensitively depends on each filter strength on contrast preserving/enhancing in textured lesion areas of the reconstructed image.