• Selected Papers of The Society of Naval Architects of Korea
• /
• 제1권1호
• /
• pp.65-75
• /
• 1993

Hull form development for an AFRAMAX tanker characterized by the form parameters of $C_B\simeq0.8$, $L/B\simeq5.5$, $B/T\simeq3.5$, han been carried out by the application of ‘Composite Stern Frameline Concept’. The viscous resistance of the new form was much smaller than that of the conventional form. Form factor of the new form was only 0.18 compared to 0.30 for the conventional hull form, Nevertheless the propulsive efficiency was slightly lower and thus the required propulsion power was smaller by 5~6% at both full load and ballast condition. In addition, it is confirmed that introduction of the form factor method such as ITTC’78 method is highly advisable because there is a great risk of the underperdicting full scale resistance of the hull form whose form the extrapolation of moel resistance to full scale is to be based on Froude method with the correlation allowances usually applied to conventional hull forms.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.906-911
• /
• 1998

This study is about an application of permanent form to the field. The present problem of this country's building market in the face of 3D, in addition to construction cost increase, materials lack problems and opening a building market to foreign countries, is trying to find out the efficient ways of overcoming these problems. So the efficacy of form work to technical improvement will contribute a practical permanent form in field through scientific test of the design and construction of permanent form. According to the result of these experiments, they seemed to be a permissible error range of Permanent form ± 5mm and steel reinforcing of Permanent form seemed to be ±5mm. a modification of Permanent form is superior to any wooden form.

• 건축역사연구
• /
• 제12권4호
• /
• pp.27-48
• /
• 2003

This paper aims to identify the meaning of architectural form of the East and the West. Ordinarily, we know the visual differences of architectural form between the two cultural families, and the technical reasons of such differences. However, the East and the West have their own views of architectural form that are derived from their own views of architecture, and again the views of architecture are rooted in their own views of the world. The paper maintains a comparative stance between the two cultures in analyzing the different concepts of architectural form, and employ the ideas of 'Form(形象)' and 'Energy-Form(氣形)' as a kind of representative concept of the two views of architectural form. It is discussed that the idea of Form pursued the realization of ultimate substance which is less materialistic but more ideal., while, the idea of Energy-Form pursued the realization of oneness and health through mutual interaction between man, architecture and nature. Architectural form in the West has been the purposeful expression of human ideal, while in the East, it was an expediential device for better energy condition. It seems important to understand such differences of the meaning of architectural form between the East and the West, since, in present time, we tend to think that the Western conception of architectural form is the only possible one. But it is not generally known that the Western conception of form has very particular background reason of its own which is unique to Western culture, and on the other hand, the nature of East Asian conception of architectural form is generally unknown.

• 정보처리학회논문지D
• /
• 제19D권1호
• /
• pp.81-94
• /
• 2012

FORM 아키텍처 모델은 소프트웨어 프로덕트 라인 내의 제품 개발에 재사용될 수 있는 아키텍처로서 FORM 방법론의 핵심적인 역할을 한다. 하지만 기존의 FORM 아키텍처 모델을 실무에 적용할 때 다음과 같은 문제점들이 있다. 첫째, UML(Unified Modeling Language)과 같이 표준화된 모델이 아니므로, 이 모델을 작성하기 위해서는 고유한 모델링 도구가 필요하다. 둘째, FORM 아키텍처 모델은 휘처모델과의 대응 관계를 통해 가변성을 관리만 할 뿐, 아키텍처의 가변성을 명시적으로 나타내지 않았다. 본 논문에서는 이러한 FORM아키텍처 모델의 문제점을 해결하기 위해서, 먼저 FORM 아키텍처 모델을 UML 모델로 표현할 수 있는 방법을 개발하였다. 이는 FORM 아키텍처 모델링에 다양한 UML모델링 도구를 이용할 수 있는 장점이 있다. 또한, 휘처모델과의 대응관계를 통해서 FORM 아키텍처 모델의 가변성을 효과적으로 관리할 뿐만 아니라 표현 할 수 있는 방법을 개발하였다.

• 약학회지
• /
• 제40권5호
• /
• pp.513-521
• /
• 1996

The polymorphism of piroxicam was studied. Form I, II, III and monohydrate designated as Form IX were prepared by recrystallization from different solvents. Depending on the coo ling rate of the piroxicam melt, Form IV, V, VI, VII and VIII were prepared. The crystal forms were characterized by DTA, TGA and UV spectroscopy. Their dissolution patterns were also investigated. During storage at ambient condition. Form VIII was transformed into Form I and it was accelerated by milling. The other crystal forms were also transformed into Form I by milling. Form I and Form IX were very stable.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.45-52
• /
• 2008

In today's construction, there has been an increase in the construction of high-rise buildings due to the need to maximize land usage. Framework affects not only the entire construction duration and cost, but also subsequency construction activities such as electrical, mechanical, and finishing works. Especially, proper formwork is a influential factor of productivity in the framwork of reinforced concrete construction. To that reason, a table form of system form is more frequently used than conventional form. However, an initial cost of the table form is high and a reused table form needs for workers to repair damaged table forms. Therefore, the goal of this study is to introduce euro-unit table form. The results from the application of euro-unit table form to high-rise residentia building construction are as follows : (1) The cost of producing table form reduced by 16%, and (2) The time of producing table form was slumped by 35%, and (3) The labor force needed for form work declined 21%.

• 한국의류산업학회지
• /
• 제7권6호
• /
• pp.601-608
• /
• 2005

This research investigated the present state of the dress forms used by clothing manufacturers and proposed procedure to bring out the standardized body type and figure for women in twenties. The result of questionnaire showed chief pattern maker's thoughts that dress form should be differently made for each age group and should be more reflected the standard body than the idea body. The standardized body type was made from the standardized posture and size which were analyzed from the interquartile range(IQR) of 314 subjects. The standardized size could be verified as for the balanced body shape of twenties through making the standard dress form. The standardized form(S form) was compared with three kinds of forms(A, K and P) for investigating the suitability of forms. K form was very similar to S form, Educational P form and manufacturer's A form had quite big differences from S form at the important areas for making clothing. The side shapes of A, K and P forms showed differences at back bending, neck angle and hip shape from S form. A form was comparatively smooth and flat. This results could be used as the practical standard to improve the suitability of size and shape in the dress forms of manufacturers and educators.

• 대한조선학회논문집
• /
• 제29권2호
• /
• pp.8-17
• /
• 1992

3차원 자유형상 물체인 선형의 정의에는 여러 방법이 있으나 선형의 기하학적 특징을 나타내는 형상계수들의 조합으로 선형을 표현하는 형상계수방법이 전산기의 이용과 함께 주목받고 있다. 그러나 종래의 형상계수방법은 실제 선형 설계시 여러가지 문제점을 노정시킴으로 본 논문에서는 자유형상 물체의 수학적 표현에 매우 적합한 B-spline곡선과 형상계수 방법을 접목시켜 선형생성을 시도했다. 응용예로서 Bulk carrier선형을 표현한 결과를 보였으며, 기존선형과 도출선형을 비교하여 본 연구의 실용 가능성을 검토했다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.10-11
• /
• 2019

The purpose of this study is to validate the environmental performance of the 'eco-friendly lightweight form' in the construction process. Unlike existing euro form and aluminum form, the proposed form does not require form oil during the process of concrete casting and is lightweight because it is made of engineering plastic. Therefore, eco-friendly lightweight form will reduce the $CO_2$ emissions in the construction process. To verify the hypothesis, the study compared existing forms and eco-friendly light weight form's $CO_2$ emissions in each stage in construction process when using 1,000 forms and 100 times from the LCI(Life Cycle Inventory) data. The total $CO_2$ emissions of the eco-friendly light weight form were 30,487kg $CO_2$, which equated to about 58% and 20% less emissions than the euroform and aluminum form. The result of the study verified that the eco-friendly lightweight form was effectively reduced $CO_2$ emission in the construction process.

• 대한한의학회지
• /
• 제41권3호
• /
• pp.66-80
• /
• 2020

Objectives: We investigated the current status of the consent form for bee-venom pharmacopuncture therapy, which is using in Korean medicine hospitals. We suggest the development of a standard informed consent form. Method: Through the questionnaire survey, status of using informed consent form was identified at 24 Korean medicine hospitals. We analyze different types of informed consent form, which was developed by each hospitals. We investigated the types of informed consent forms for various medical procedures through electronic searches. A standard informed consent form for bee-venom pharmacopuncture therapy was developed based on the medical law and the standard informed consent form for medical procedures developed by Korea Fair Trade Mediation Agency. Result: In our survey, 65% of the hospitals do not use consent well, only 35% of the hospitals use informed consent form, and the most hospitals use self-developed informed consent form. As a result of analyzing the contents of informed consent form used in each hospitals, the explanation of diagnosis, treatment precautions, suggestions for other treatments, consequences of not performing the scheduled procedure, possibility of treatment change was insufficient. 48% of hospitals manage consent in recording on a chart, 39% in scanned documents, and 13% in digital electronic consent form. Conclusion: A standard informed consent form for Bee-venom pharmacopuncture therapy include diagnosis, effectivness, necessity, indications, method, skin reaction test, hypersensitivity questionnaire, treatment precautions, possible hypersensitivity reactions and countermeasures, suggestions for other treatments, consequences of not performing the scheduled procedure, possibility of treatment change and the name of doctor.