• Journal of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.85-91
• /
• 1975

The crystal structure of piperidinothiosemicarbazide, $C_6H_{13}N_3S$, has been determined by single crystal X-ray analysis. The space group is P21/c with four molecules in the unit cell of dimensions $a=14.68{\pm}0.04,\;b=4.59{\pm}0.02,\;c=12.92{\pm}0.04{\AA}\;and\;{\beta}=109.4{\pm}0.2^{\circ}$. Three-dimensional photographic intensities were estimated visually. The structure has been solved by an interpretation of a Patterson synthesis and refined by block-diagonal least-squares methods to give a final R value of 0.14 for 378 observed independent reflections. There are two independent hydrogen bonds in the structure. One of them is of the type N-H${\ldots}$S with the length 3.28 and $3.39{\AA}$, and another is of the type N-H${\ldots}$N with the length $3.03{\AA}$. Apart from the hydrogen bonding system the molecules are held together in the crystal by van der Waals forces.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.530-538
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+}$$\delta$/ (110 K phase) high $T_{C}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with 5~50 wt％ MgO were sintered at 820~86$0^{\circ}C$ for 24 h. The structural characteristics, critical temperature and grain size of the samples with different MgO contents were analyzed by XRD and SEM. As the MgO content increased, the intensity of MgO peaks and ratio of Bi-2212 phase in superconductors were intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.d.creased.d.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.4
• /
• pp.335-340
• /
• 2007

A new correlation between the Nusselt number based on modified heat transfer coefficient and Reynold number based on droplet-flow-rate was developed for the experimental data. The modified heat transfer coefficient was defined as ratio of wall heat flux to droplet subcooling. In the previous reports, the local heat flux of spray cooling in the film boiling region was experimentally investigated for the water spray region of $D_{max} = 0.0007{\sim}0.03m^3/(m^2s)$ . In the region near the stagnation point of spray flow, a new heat transfer correlation is recommended which shows good predictions for the water spray region of $D_x{\le}0.01m^3/(m^2s)$.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.25-42
• /
• 1996

The study has been conducted to know an appropriate feeding strategy and effects of the rearing density on larval growth of the rockfish, Sebastes schlegeli. The results obtained are as fellowed ; 1. Thirty-day-old larvae reached at $25.25{\pm}3.76$ mm in total length and $0.23{\pm}0.07$ g in body weight in experiment A, at which rotifer was provided from the beginning to the end of 30-day experiment, Anemia from 3th to 18th day, and artificial feed from 13th to 30th day after hatching. When rotifer was provided for 30 days, Artemia from 6th to 18th day, and artificial feed from 18th to 30th day after hatching (experiment B), these larvae grew up to $27.52{\pm}2.50$ mm in total length and $0.26{\pm}0.06$ g in body weight. On the other hand, when rotifer and artificial feed were supplied with the same time schedule as shown in experiment B, and Artemia was feed from 6th to 30th day after hatching (experiment C), the total length and body weight of those larvae were $23.22{\pm}3.44$ mm and $0.15{\pm}0.05$ g, respectively. The best result for larval growth was obtained from experiment B. The survival rates estimated were $57.6\%$ in experiment A, $66.4\%$ in experiment B, and $44.4\%$ in experiment C. 2. The growth in total length of the larvae according to their rearing days could be represented by the following equations : Experiment A : Y=4.350+0.116X+$1.887X^2$ (r=0.993) Experiment B : Y=4.500+8.931X+$2.221X^2$ (r=0.994) Experiment C : Y=4.478+5.734X+$1.881X^2$(r=0.990) The average number of Artemia nauplius intaken by the larvae was rapidly increased between 15th and 20th day afer hatching, and 9, 212, 242, 750, and 1,171 nauplius were found in the different sizes of larvae, whose total length were 5.65, 6.81, 9.45, 14.96, and 24.52 mm, respectively. 3. Larval growth in total length and body weight reared at four different densites (A: 1.8 $kg/m^3$, B; 4.0 $kg/m^3$, C; 5.0 $kg/m^3$, D; 6.2 $kg/m^3$) indicated that the best growth was found in experiment A, at which the larval were reared at the lower density and the final survival rates extimated were $92.9\%$ in exp. A, $99.5\%$ in exp. C, $89.0\%$ in exp. B, and $88.2\%$ in exp. D. The amount of production per cubic meter turned out to be 30.45 kg in exp. D, 25.89 kg in exp. C, 20.75 kg in exp. B and 10.48 kg in exp. A. therefore, considering both larval growth and survival rate, higher yields seemed to be attainable at the relatively high-rearing density.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.5
• /
• pp.735-740
• /
• 2014

The study investigated the roast color formation properties of ginseng upon soaking in threonine/sucrose solution followed by roasting. To determine operational parameters, including threonine concentration ($X_1$, 0.1~0.9%), sucrose concentration ($X_2$, 1.0~3.0%), and roasting temperature ($X_3$, $130{\sim}170^{\circ}C$), response surface methodology was applied to monitor color properties, including brown color intensity, Hunter's colors, and organoleptic color. Coefficients of determinations ($R^2$) of the models were above 0.8758 (P<0.05) in terms of brown color intensity and Hunter's color parameters. Brown color intensity of roasted ginseng extract was maximized in 0.70% threonine and 2.32% sucrose soaking solution under roasting conditions of 25 min at $166.03^{\circ}C$. a values of roasted ginseng were maximized in 0.74% threonine and 2.19% sucrose soaking solution under roasting conditions of $165.40^{\circ}C$. b values of roasted ginseng were maximized in 0.61% threonine and 2.28% sucrose soaking solution under roasting conditions of $159.16^{\circ}C$. The maximum organoleptic color score of roasted ginseng extract was 7.27 in 0.53% threonine and 1.01% sucrose soaking solution under roasting conditions of $146.96^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.35-42
• /
• 2002

Modulation frequency dependences of the pyroelectric properties of PLT (P $b_{1-x}$ L $a_{x}$ $Ti_{1-x}$ 4/ $O_3$) thin films with La concentrations of 5, 10 and 15㏖% have been investigated by using the dynamic method. The PLT thin film with 10㏖% of the La concentration (PLT(10) thin film) shows the most excellent pyroelectric properties among the films. For PLT(10) thin film, the pyroelectric coefficient shows the maximum value of 6.6$\times$10$^{-9}$ C/$\textrm{cm}^2$ㆍK without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are 1.03$\times$10$^{-11}$ Cㆍcm/J and 1.46$\times$10$^{-9}$ Cㆍcm/J, respectively. Voltage responsivity corresponding to the pyroelectric voltage is almost constant at low modulation frequency and decreases in proportional to frequency at high modulation frequency. Voltage responsivity is 5.15 V/W at 8Hz. Noise equivalent power (NEP) and specific detectivity ( $D^{*}$) of the PLT(10) thin film are 9.93$\times$10$^{-8}$ W/H $z^{1}$2/ and 1.81$\times$10$^{6}$ cmH $z^{1}$2/W at the frequency of 100Hz, respectively. The results indicate that PLT(10) thin film is very suitable for pyroelectric IR sensors.s.s.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.164-168
• /
• 2024

(La_0.7Sr_0.3)(Mn_1-xFe_x)O₃ (LSMFO) (x = 0.03, 0.06, 0.09, 0.12) precursor solution are prepared by sol-gel method. LSMFO thin films are fabricated by the spin-coating method on Pt/Ti/SiO₂/Si substrate, and the sintering temperature and time are 800℃ and 1 hr, respectively. The average thickness of the 6-times coated LSMFO films is about 181 to 190 nm and average grain size is about 18 to 20 nm. As the amount of Fe added in the LSMFO thin film increased, the resistivity decreased, and the TCR and B_25/65-value increased. Electrical resistivity, TCR and B_25/65-value of the (La_0.7Sr_0.3)(Mn_0.88Fe_0.12)O₃ thin film are 0.0136 mΩ-cm, 0.358%/℃, and 328 K at room temperature, respectively. The resistivity properties of LSMFO thin films matched well with Mott's VRH model.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.156-160
• /
• 1998

Crystal structures and magneto-optical properties of $(Mn_{0.5-Z}Sb_{0.5+Z})_{100-y}Pt_y$ (0$(Mn_{0.5-Z}Sb_{0.5+Z})_{100-y}Ag_y$ (0$^{\circ}C$ are C1b-type with fcc and NiAs-type with hcp, respectively. The MnSbAg films have a texture which the c-axis orientation is perpendicular to the film plane by annealing at 300 $^{\circ}C$ for less than 3 hours. The perpendicular anisotropy constants of the $Mn_{47.4}Sb_{47.5}Ag_{5.1}$ film annealed at 300 $^{\circ}C$ for 3 hours are $K_1=6.6{\times}10^5 \; erg/cm^3\;and\;K_2=1.9{\times}10^5\; erg/cm^3$. The Kerr rotation angle of MnSbPt films increases but that of MnSbAg film decreases by decreasing incident wavelength within the range of 700$\leq$ λ$\leq$1000 nm. High polar Kerr angles of 1.7$^{\circ}$ (λ =700 nm) and 0.6$^{\circ}$ (λ =1000 nm), 0.2$^{\circ}$ (λ =700 nm) and 0.97$^{\circ}$ (λ =1000 nm) have been obtained from $Mn_{41.1}Sb_{44,9}Pt_{14.0}$ and $Mn_{47.4}Sb_{47.5}Ag_{5.1}$ alloy films, respectively.

• The Plant Pathology Journal
• /
• v.31 no.2
• /
• pp.176-180
• /
• 2015

Postharvest diseases cause losses in a wide variety of crops around the world. Irradiation, a useful nonchemical approach, has been used as an alternative treatment for fungicide to control plant fungal pathogens. For a preliminary study, ionizing radiations (gamma, X-ray, or e-beam irradiation) were evaluated for their antifungal activity against Botrytis cinerea, Penicillium expansum, and Rhizopus stolonifer through mycelial growth, spore germination, and morphological analysis under various conditions. Different fungi exhibited different radiosensitivity. The inhibition of fungal growth showed in a dose-dependent manner. Three fungal pathogens have greater sensitivity to the e-beam treatment compared to gamma or X-ray irradiations. The inactivation of individual fungal-viability to different irradiations can be considered between 3-4 kGy for B. cinerea and 1-2 kGy for P. expansum and R. stolonifer based on the radiosensitive and radio-resistant species, respectively. These preliminary data will provide critical information to control postharvest diseases through radiation.

• Journal of the Microelectronics and Packaging Society
• /
• v.1 no.2
• /
• pp.105-112
• /
• 1994

BaTiO3 의 B-site에 0-0.03 몰 범위의 NiO를 첨가한 Ba1-xSrxTi1-y-wNiyZrwO3-y 유전 체에서 NiO 첨가가 유전특성 및 절연저항의 내환원성에 미치는 영향을 조사하였다. B-site Ni 치환에 의해 a 축의 격자상수는 증가하고 c 축의 격자상수는 감소하여 정방성 c/a가 감 소하였으며 단위격자의 부피는 증가하였다. NiO 첨가에 따라 큐리온도는 저온으로 이동하 였으며 큐리온도의 변화율은 소결분위기에 영향을 받았다. NiO가 첨가되지 않은 조성에서 는 산소분압 109 MPa의 환원분위기 소성에 의해 비정항이 107$\Omega$.cm로 저하되었으나 0.01 몰이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을수 있었던 1011$\Omega$.cm로 저하되었으 나 0.01 몰 이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을 수 있었던 1011$\Omega$.cm 이 상의 비저항을 유지하였다.