• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.47-53
• /
• 2002

In this study, two different (NiCuZn)-ferrite which were fabricated by using ultra-fine powders synthesized by the wet processing and conventionally commercialized powder, were investigated and compared each other in terms of the low temperature sintering and electromagnetic properties. Composition of x and w in $(Ni_{0.4-x}Cu_xZn_{0.6})_{1+w}(Fe_2O_4)_{1-w}$ were controlled as 0.2 and 0.03, respectively. The sintering temperature were $900^{\circ}C$ for ultra-fine powders by way of initial heat treatment and $1150^{\circ}C$ for commercialized powders. The (NiCuZn)-ferrite by ultra-fine powders showed love. sintering temperature than that of commercialized powders by over $200^{\circ}C$, and excellent electromagnetic properties such as the quality factor which is a important factor in the multi-layered chip inductor. In addition, characteristics of B-H hysteresis, crystallinity, microstructure and powder morphology were analyzed by a vibrating sample method(VSM), x-ray diffractometer(XRD), transmission electron microscope (TEM) and scanning electron microscope(SEM).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.404-407
• /
• 2016

In this study, to develop low temperature sintering capacitor composition ceramics with the good dielectric properties, $(Ba_{0.86}Ca_{0.14})(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3$ (BCTZ) ceramics were prepared by the conventional solid-state reaction method. The effects of $B_2O_3$ addition on the dielectric properties and microstructure was investigated. The XRD patterns demonstrated that all the specimens showed Perovskite phase, and secondary phases are indicated in the measurement range of XRD. And also, temperature coefficient of capacitance(TCC) of all the specimen sintered at $1,180^{\circ}C$ showed +3~-56% except for x=0.006. For all the specimens, observed one peak was tetragonal cubic difuse phase transition temperature(Tc), which is located in the vicinity of room temperature.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.173-178
• /
• 1998

$MgB_4O_7$: Tb, Tm, Dy, La, Ho and Nd phosphors have been prepared by sintering around $580^{\circ}C$ for 2 hours followed by flowing Ar gas. Activation energy and kinetic order of main peak of glow curve were studied by two methods peak shape method and initial rise method. By these methods, the estimated activation energies were $0.76\pm0.02eV$(Tb doped), $0.94\pm0.03eV$(Tm doped), $0.72\pm0.02eV$(Dy doped), respectively. The TL phosphors prepared in this work may be utilized to radiation sensor elements becaue of their high sensitivity to low energy X-ray.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.25-28
• /
• 1990

The superconducting properties have been studied for high-Tc superconductors of the $Bi_{2-x}Mo_xSr_2Ca_2Cu_3O_y$ system (x = 0.03-0.30). The crystal structure is pseudo tetragonal with the average lattice parameters a = 5.38 ${\AA}$, b = 5.44 ${\AA}$ and c = 30.6 ${\AA}$. All samples exhibit superconductivity with Tc offset at 79 K and Tc onset at 90-115 K. The Tc onset point decreases with increasing x, but the Tc offset points are nearly the same for all samples. Scanning electron micrographs show a special growth behavior of the grains with a plate shape. It is suggested that the decrease in Tc onset points with substitution of Mo for Bi is due to the decrease in lattice parameters and to the p-orbital of Mo. It is concluded that Mo does not play a crucial role in the superconducting transition of the $Bi_2Sr_2Ca_2Cu_3O_y$ system.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.173-181
• /
• 2001

We calibrated a capacitance diaphragm gauge(CDG) of 1,333 Pa range by using ultrasonic interferometer manometer (UIM) that was a national low vacuum standards system. And its uncertainties were evaluated according to International Organization for Standardization(ISO), they were named to A type uncertainty, B type uncertainty, combined standard uncertainty, and expanded uncertainty, We obtained that the combined standard uncertainties were $1.38 \times10^{-2}\; Pa\sim3.03 \times10^{-1} $Pa and the relative uncertainties(combined standard uncertainty/standard pressure) were $2.3 \times 10^{-4}\;Pa\sim7.9 X\times10^{-3} $Pa for this 1,333 Pa CDG.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.628-635
• /
• 1999

At center frequency of 11.85 GHz, wideband left-handed circularly polarized microstrip array antenna is designed with the method of sequential ratation based on $2\times2$ radiation elements($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$ phase delay). Its return loss, axial ratio bandwidth, radration pattern, and gain are compared with those adopting sequential rotation based on $1\times2$ radiation elements($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$phase delay). The $8\times8$ array is manufactured and measured. The results show that 10 dB return loss bandwidth is 10.51~12.74GHz(18.82%) which is 1.57 times wider than the case using $1\times2$ sequential rotation method, 3 dB axial ratio bandwidth is 11.43~12.5 GHz(9.03%) which is 1.25 times as wide as that using $1\times2$ sequential rotation method and the antennal gain is 25.4 dB. The results of mesurements are almost similar to those of simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.60-63
• /
• 1997

Dieletric ailed piezoelectric properties of Pb[$Zr_{0.45}$/ $Ti_{0.5-x}$/L $u_{x}$ (M $n_{1}$3//S $b_{2}$3)$_{0.05}$] $O_3$(0$\leq$x $\leq$0.03) were investigated. The partial substitution of $Ti^{4+}$ by a L $u^{3+}$ permitted improvement of the piezoelectric constant( $d_{33}$ ), electromechanical coupling factor ( $k_{p}$ ) and dielectric constant($\varepsilon$$_{33}$ /Sup T/). The dielectric loss(tan $\delta$ ) increased and mechanical quality factor(Qm) decreased with an increase of x were observed. A new piezoelectric material for actuator application was developed at x=0.02 with $d_{33}$ =370$\times$10$^{-2}$ /C/N, $k_{p}$ =58.5%, $\varepsilon$$_{33}$ $^{T}$ =1321, $Q_{m}$ =714 and tan $\delta$ =0.98%.%..%.%.

• Archives of Pharmacal Research
• /
• v.19 no.1
• /
• pp.71-73
• /
• 1996

The molecular structure of pirprofen, 3-chloro-4-(2,5-dihydro-1H-pyrrol-1-yl)-.alpha.-methyl-benzeneacetic acid, was determined by single crystal X-ray diffraction analysis. The compound was recrystallized from a mixture of chloroform and toluene in triclinic, space group P over $\bar1,\; with\; a=4.577(1),\; b=11.213(2),\; C=12.485(2){\AA},\alpa.=107.39(1),\;\beta=97.79(1),\;\gamma=92.03(2),\; and Z=2$ The calculated density is $1.384 g/cm^3$. The structure was solved by the direct method and refined by full matrix least-squares procedure to the final R value of 0.034 for 1681 independent reflections. The non-aromatic dihydropyrrol group is found to be coplanar to the central aromatic ring. The molecules are dimerized through the intermolecular hydrogen bonds at the carboxyl group in the crystal.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.135-139
• /
• 2018

The glass structure and antibacterial properties of $(65-x)ZnO-xB_2O_3-35P_2O_5$ glasses were investigated. Zinc borophosphate glasses were prepared using a conventional melt-quenching technique at $1000^{\circ}C$. Glass transition temperature and CTE were studied and the structure of zinc borophosphate glasses was evaluated by FTIR. The $Zn^{2+}$ state increase with increasing ZnO content was investigated by XPS and a single sharp Zn $2P_{3/2}$ peak was confirmed, showing that Zn $2P_{3/2}$ exists as $Zn^{2+}$. In order to to evaluate the antimicrobial activity, Escherichia coli (E. coli) was used following the Japanese Industrial Standard JIS Z 2801; the E. coli death rate was found to increase with increasing $Zn^{2+}$ content of glasses.

• Electrical & Electronic Materials
• /
• v.4 no.2
• /
• pp.150-158
• /
• 1991

본 연구에서는 0.80Pb(F $e_{1}$2/N $b_{1}$2/) $O_{3}$-(0.20-x)Pb(F $e_{2}$3/ $W_{1}$3/) $O_{3-x}$Ba(C $u_{1}$2/ $W_{1}$2/) $O_{3}$ (x=0.01, 0.02, 0.03) 세라믹을 소결온도 및 시간을 각각 860~960[.deg.C], 2시간으로 하여 일반 소성법으로 제작하였다. 시편의 조성비와 소결온도에 따른 구조적, 유전적 특성을 조사하였으며 유전손실 특성의 개선을 위해 조성 0.80Pb(F $e_{1}$2/N $b_{1}$2/) $O_{3}$-0.18Pb (F $e_{2}$3/ $W_{1}$3/) $O_{3}$-0.02Ba(C $u_{1}$2/ $W_{1}$2/) $O_{3}$시편에 Mn $O_{2}$를 0~1.25[wt%]로 첨가한 후 유전특성의 변화를 관찰하였다. Mn $O_{2}$의 첨가량이 증가함에 따라 결정립의 크기와 유전상수는 점차 감소하였다. 소결밀도는 900[.deg.C]에서 소결시킨 시편의 경우 최대값을 나타내었다. Ba(C $u_{1}$2/ $W_{1}$2/) $O_{3}$의 양이 0.01에서 0.03[mol]로 증가함에 따라 상전이온도는 38[.deg.C]에서 2[.deg.C]로 감소하였다. 조성 0.80Pb(F $e_{1}$2/N $b_{1}$2/) $O_{3}$0.18Pb(F $e_{2}$3/ $W_{1}$3/) $O_{3}$-0.02Ba(C $u_{1}$2/ $W_{1}$2/) $O_{3}$에 Mn $O_{2}$가 0.25[wt%] 첨가된 시편의 20[.deg.C]에서의 유전상수는 16,700으로 최대값을 유전손실을 1.28[%]로 최소값을 나타내었다. 또한 모든 시편은 온도 및 주파수에 따라 유전상수가 완만하게 변화하는 유전이완 특성을 나타내었다.다.