• Title/Summary/Keyword: %EC%A0%90

Search Result 140, Processing Time 0.034 seconds

Physicochemical Changes of Food Waste Slurry Co-fermented with Pig Manure Slurry (음식물쓰레기와 돈분 액상물의 혼합부숙시 이화학적 특성 변화)

  • So, Kyu-Ho;Seong, Ki-Seog;Hong, Seung-Gil
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.40 no.4
    • /
    • pp.242-248
    • /
    • 2007
  • To find a feasibility of utilization of food waste slurry (FWS) generated during composting, FWS was combined with pig manure slurry (PMS) in various ratios and the change of nutrient contents and offensive odor of the combined slurries before and after fermentation were studied. The initial pH was 7.67 for PMS and 8.45 for FWS. However, during the fermentation, pH increased in the combined slurries with the higher FWS rate among the treatments while decreased in thosewith higher PMS rate. EC of each slurry sample showed that the difference among combined slurry samples has been reduced during fermentation and became stabilized in $21{\sim}23dS\;m^{-1}$ after 180 days. After 180 days fermentation, total nitrogen (T-N) decreased. T-N of mixture with a half and more FWS decreased up to 0.1%, less than the critical level (0.3%). The contents of O.M., T-N, phosphorus, calcium and magnesium decreased with fermentation while those of potash and salinity increased. From initial fermentation until 30 days, a lot of $NH_3$, as an offensive odor, was produced. However, it decreased steadily, except in higher PMS rate. In terms of producing $50{\mu}g\;ml^{-1}$ of $NH_3$, the top layer took 30 days after fertilization with FWS only, 45 days for utilized treatment with F75 (25 % of PMS), 75 days for utilized with F50 (50%) and F25 (75%) and 90 days for PMS only, respectively. $RNH_2$ also had similar trend with $NH_3$ but it was produced continuously as long fermentation proceeded. In terms of $RNH_2$, the decrease in concentration up to $50{\mu}g\;ml^{-1}$ were; 45 days for FWS only(F100), 105 days for F75 utilization, 120 daysfor F50, 165 days for F25, respectively. ethyl mercaptan was produced in PMS until 180 days after fertilization but it was not produced in FWS. Sensory tests as an integrated test of offensive odor were also done. FWS showed lower than 1 after 30 days from initial fermentation, while PMS had still offensive odor even up to 180 days from initial fermentation. It is probably affected by the continuous production of ethyl mercaptan and amines. However, considering in decrease T-N content caused by volatilization while offensive odor intensity according to official standard of fertilizer is lower than 2. Further study on controlling offensive odor needs to be done.

Complete Nucleotide Sequence Analysis and Structural Comparison of 3 members of Tomato Phenylalanine ammonia-lyase gene (토마토에서 분리한 3종류의 Phenylalanine ammonia-lyase gene에 대한 염기서열 및 특성비교)

  • 여윤수;예완해;이신우;배신철;류진창;장영덕
    • Korean Journal of Plant Tissue Culture
    • /
    • v.26 no.1
    • /
    • pp.41-47
    • /
    • 1999
  • Phenylalanine ammonia-lyase (PAL; EC 4, 3, 1, 5) genomic clones were isolated from tomato(Lycopersicon esculentum L.) genomic DNA libraries using tomato PAL5 cDNA sequences as probes. The nucleotide sequences of tPAL1, tPAL4 and tPAL5 were compared. tPAL5 contains an open reading frame encoding a polypeptide of 722 amino acids, interrupted by a 710 bp intron in the codon for the amino acid 139. tPAL1 encodes a polypeptide of 249 amino acids which is much shorter than tPAL5 gene due to a premature stop codon and does not contain an intron. tPAL4 encodes a polypeptide of 357 amino acids, interrupted by a 305 bp intron in the codon for the amino acid 138. Premature stop codons observed in tPAL1 and tPAL4 gene produce a short polypeptide rather than a normal polypeptide (722 aa). tPALl shows 87.2% homology with tPAL4 and 85.3% homology with tPAL5 gene whereas tPAL4 showes 91.4% homology with tPAL5 at nucleotide level. In general, phylogenetic analysis showed that genes isolated from tomato, potato, and sweet potato were belong to the same group and another dicot plants such as parsley, bean, soybean, pea and alfalfa formed another group. PAL genes isolated from rice and yeast showed very low homology with other PAL genes and formed the other group.

  • PDF

Effect of Phosphorous Acid on Control of Phytophthora Blight of Red Pepper (고추 역병에 대한 아인산 (phosphorous acid)의 방제 효과)

  • Lee, Yong-Se;Ryu, Yeon-Ju;Cho, Jeong-Sang;Lim, Tae-Heon;Chang, Tae-Hyun
    • Korean Journal of Environmental Agriculture
    • /
    • v.20 no.3
    • /
    • pp.180-185
    • /
    • 2001
  • Control effects of phosphorous acid were investigated on Phytophthora blight of red pepper plants in greenhouse and field. In vitro test, the mycelial growth of Phytophthora capsici was inhibited by the phosphorous acid more than 97% at 1,000 ${\mu}g$ and 10,000 ${\mu}g$ a.i./mL in the liquid and solid culture, respectively. At concentration of 10 ${\mu}g$ a.i./mL of phosphorous acid, in the liquid culture the mycelial growth of P. capsici was inhibited 46.2%, however inhibited only 4.9% on the soild culture. Zoosporangial formation was also inhibited 89.1% by phosphorous acid at 100 ${\mu}g$ a.i./mL. Phosphorous acid affected more zoosporangial formation of P. capsici than its mycelial growth. At the concentrations of 10,000, 1,000 and 100 ${\mu}g$ a.i./mL of phosphorous acid, germination of zoosporangia was inhibited 100, 84.3 and 44.2%, respectively. Mycelial growth and zoosporangial formation of P. capsici were little affected at the concentration of 10 ${\mu}g$ a.i./mL of phosphorous acid. Cermination of zoosporangia was also little affected at this concentration, however growth of the germ tubes was inhibited and the abnormal mycelial growth was observed. Phosphorous acid suppressed the incidence of Phytophthora blight of red pepper plants up to $77.0{\sim}62.0%$, in greenhouse. Phosphorous acid suppressed the incidence of Phytophthora blight of red pepper plants up to 54.0% at the conventional culture in field. Treatments of phosphorous acid increased up to 113% in height, 135% in number of fruit, and 129% in weight of fruit.

  • PDF

Screening of yeast for alcoholic fermentation of no sugar-added tomato concentrate (토마토 농축액을 이용한 무가당 알코올 발효를 위한 효모의 선발)

  • Kim, Dong-Hwan;Moon, Jae-Nam;Lee, Seul;Lee, Soo-Won;Moon, Hey-Kyung;Kim, Gwi-Young
    • Food Science and Preservation
    • /
    • v.23 no.4
    • /
    • pp.591-598
    • /
    • 2016
  • The purpose of this study was to screen desirable yeast strains for alcoholic fermentation of tomato paste without sugar addition. The moisture, crude protein, crude fat, ash, and soluble nitrogen contents of the tomato paste ($25^{\circ}Brix$) were found to be 67.33%, 1.90%, 0.03%, 0.02%, and 30.72%, respectively. Free sugars found in the paste were fructose and glucose. Most abundant free amino acids of the paste were glutamic, aspartic, and ${\gamma}$-aminobutyric acids. Total seven yeast strains (Saccharomyces cerevisiae KDH (TWA), S. cerevisiae Lalvin ICVD-47 (TWB), S. cerevisiae Lalvin RC-212 (TWC), S. cerevisiae Lalvin K1-V1116 (TWD), S. bayanus Lalvin EC-1118 (TWE), S. cerevisiae Enoferm (TWF), and S. cerevisiae DJ97(KCTC8842P) (TWG)) were tasted for alcohol fermentation of the tomato paste. The highest alcohol content (8.2%) and the lowest residual sugar content ($13.25^{\circ}Brix$) were observed in the tomato paste fermented using the S. cerevisiae Lalvin ICVD-47 strain (TWB) after 3 day and 4 day of fermentation, respectively. Sugar and reducing sugar contents, and pH of the tomato paste were not remarkably affected by the difference in yeast strains used, showing $13.25{\sim}13.45^{\circ}Brix$, 28.37~28.48 mg/mL, and 4.43~4.54, respectively, after 4 day of fermentation. Color and total acid content were significantly affected by the types of yeast strains and fermentation time, but the numerical changes were negligible. These results indicate that TWB would be the suitable strain for alcoholic fermentatiom of tomato paste based on its highest alcohol production and the lowest residual sugar content produced during fermentation.

Structural Behavior of Mixed $LiMn_2O_4-LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ Cathode in Li-ion Cells during Electrochemical Cycling

  • Yun, Won-Seop;Lee, Sang-U
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2011.05a
    • /
    • pp.5-5
    • /
    • 2011
  • The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

  • PDF

A Study on the Structural Behavior of the Composite Slab with New-Shaped Deckplate (신형상 데크플레이트를 이용한 합성슬라브의 구조적인 거동에 대한 연구)

  • Huh, Choong;Moon, Tae Sup
    • Journal of Korean Society of Steel Construction
    • /
    • v.9 no.3 s.32
    • /
    • pp.341-350
    • /
    • 1997
  • The objective of this study is to investigate the structural behavior of the composite slabs with the new metal deckplate. The new deckplate can be used as structural member with topping concrete. So several experiments of this structural test and the fire resistance test were done. From this experiments. slabs with new metal deckpklate were verified as composite slabs. In this paper, this verifications were compared with the international design methods. For experiment. 49 specimens were made. the main parameters are deckplate thickness (1.2mm. 1.6mm) depth of topping concrete(85mm. 90mm). support condition(simple, 2-span), shear reinforcment(studs), span(2.7m, 3.0m, 3.3m. 3.6m. 3.9m) and shear span(L/3, L/4, L/7). We analyzed the structural behavior of composite slab throughout the moment-curvature relationship which is obtained with the program using the computer language. Turbo C. From this development for slab system, the reinforced concrete or steel structure building may be easy, economical for construction, And informations about the structural behavior of composite slabs will be utilized to established korea standard.

  • PDF

Characteristics of Manure and Estimation of Nutrient and Pollutant of Holstein Dairy Cattle (홀스타인 젖소 분뇨의 특성과 비료성분 및 오염물질 부하량 추정)

  • Choi, D.Y.;Choi, H.L.;Kwag, J.H.;Kim, J.H.;Choi, H.C.;Kwon, D.J.;Kang, H.S.;Yang, C.B.;Ahn, H.K.
    • Journal of Animal Science and Technology
    • /
    • v.49 no.1
    • /
    • pp.137-146
    • /
    • 2007
  • This study was conducted to determine fertilizer nutrient and pollutant production of Holstein dairy cattle by estimating manure characteristics. The moisture content of feces was 83.9% and 95.1% for urine. The pH of feces and urine were in the ranges of 7.0~7.4 and 7.5~7.8, respectively. The average BOD5, COD, SS, T-N, T-P concentrations of the dairy feces were 18,294, 52,765, 102,889, 2,575, and 457mg/ℓ, respectively. Dairy urine showed lower levels of BOD5(5,455mg/ℓ), COD(8,089mg/ℓ), SS(593mg/ℓ), T-N(3,401mg/l), and T-P(13mg/ℓ) than feces. The total daily produced pollutant amounts of a dairy cow were 924.1g(Milking cow), 538.8g(Dry cow), 284.4g(Heifer) of BOD5, 2,336.5g (Milking cow), 1,651.8g(Dry cow), 734.1g(Heifer) of COD and 4,210.1g(Milking cow), 2,417.1g(Dry cow), 1,629.1g(Heifer) of SS and 194.8g(Milking cow), 96.4g(Dry cow), 58.3g(Heifer) of T-N and 24.0g(Milking cow), 10.2g(Dry cow), 6.1g(Heifer) of T-P. The calculated amount of pollutants produced by a 450kg dairy cow for one year were 181.3kg of BOD5, 492.5kg of COD, 899.9kg of SS, 36.0kg of T-N and 4.1kg of T-P. The total yearly estimated pollutant production from all head(497,261) of dairy cattle in Korea is 90,149 tons of BOD5, 244,890 tons of COD, 447,491 tons of SS, 17,898 tons of T-N and 2,008 tons of T-P. The fertilizer nutrient concentrations of dairy feces was 0.26% N, 0.1% P2O5 and 0.14% K2O. Urine was found to contain 0.34% N, 0.003% of P2O5 and 0.31% K2O. The total daily fertilizer nutrients produced by dairy cattle were 197.4g (Milking cow), 97.4g(Dry cow), and 57.9g(Heifer) of Nitrogen, 54.2g(Milking cow), 22.2g(Dry cow), and 14.2g(Heifer) of P2O5 and 110.8g(Milking cow), 80.4g (Dry cow), and 39.5g(Heifer) of K2O. The total yearly estimated fertilizer nutrient produced by a 450kg dairy animal is 36.2kg of N, 8.8kg of P2O5, 24.6kg of K2O. The estimated yearly fertilizer nutrient production from all dairy cattle in Korea is 18,000 tons of N, 4,397 tons of P2O5, 12,206 tons of K2O. Dairy manure contains useful trace minerals for crops, such as CaO and MgO, which are contained in similar levels to commercial compost being sold in the domestic market. Concentrations of harmful trace minerals, such as As, Cd, Hg, Pb, Cr, Cu, Ni, Zn, met the Korea compost standard regulations, with some of these minerals being in undetected amounts.

Influences of Solifluction and Sediment Runoff on the Stream Water Qualities in the Northeastern Area of Bukhansan National Park (북한산국립공원(北漢山國立公園) 북동사면(北東斜面)에서 동결융해침식(凍結融解浸蝕) 및 토사유출(土砂流出)이 계류수질(溪流水質)에 미치는 영향(影響))

  • Park, Jae Hyeon
    • Journal of Korean Society of Forest Science
    • /
    • v.90 no.4
    • /
    • pp.513-523
    • /
    • 2001
  • This study was conducted to investigate influences of solifluction and sediment runoff on the stream water qualities during the spring season. The study sites were four points in the northeastern area of the Bukhansan National Park. And, field surveys were carried out in the spring of 1999, 2000 and 2001. The results of this study were summarized as follows; During the investigation period, the amounts of sediment caused by solifluction on stream side slopes in the downstream were 1.3~1.7 times as large as those in the upstream. The pH of sediment caused by solifluction was a potential influence on the pH of stream water. Amounts of dissolved $Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$ in stream water were proportion to the average amounts of $Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$ in the sediment caused by solifluction. In the spring, the average pH of stream water was lower than the first class of the river water quality standard because of increasing chemical concentration as well as the contents of anions($Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$) in the spring season. Also, the average electrical conductivity of water in downstream was about 2.3-3.3 times higher than that in upstream. The amounts of anions($Cl^-$, $NO_3{^-}$ and $SO{_4}^{2-}$) of water in downstream were about 1.2~7.4, 1.1~3.9, 1.1~1.4 times higher than those in upstream, respectively. Therefore, these results showed that the water quality of downstream was worse than that of upstream. As a result of regression analyses, the linear and exponential equation of pH and water quantity was pH = 1.7926 ${\times}$ stream water quantity + 5.9577($R^2=0.46$), and those of electrical conductivity and water quantity was $EC=34.417e^{3.6334{\times}\text{stream water quantity}(m^3/sec)}$ ($R^2=0.44$).

  • PDF

Effects of Salt Stress on Dry Matter, Glucose, Minerals Content and Composition in Potato (Solanum tuberosum L.) (염스트레스가 감자(Solanum tuberosum L.)의 건물, 환원당, 무기성분의 함량 및 조성에 미치는 영향)

  • Im, Ju Sung;Kim, Mi Ok;Hong, Me Soon;Kim, Mi Suk;Cheun, Chung ki;Park, Yeong Eun;Cho, Ji Hong;Cho, Kwang Soo;Chang, Dong Chil;Choi, Jang Gyu;Lee, Jong Nam
    • Korean Journal of Environmental Agriculture
    • /
    • v.38 no.1
    • /
    • pp.38-46
    • /
    • 2019
  • BACKGROUND: Salinity is one of the main environmental stresses deteriorating qualities as well as yields of food crops. This study was conducted to identify the effects of salt stress on dry matter ratio, glucose content, and mineral content and composition in potatoes (Solanum tuberosum L.). METHODS AND RESULTS: Four potato varieties were grown in plastic pots (diameter 20 cm and height 25 cm) with three salinity levels (EC: 1.0, 4.0, and 8.0 dS/m) in a glasshouse. Dry matter ratio, specific gravity, starch, and glucose content in tubers harvested at 90 days after sowing were analyzed. Also, mineral contents (T-N, T-C, $P_2O_5$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$) in stem, leaf, and tuber were investigated and statistically analyzed for analysis of variance (ANOVA). Dry matter ratio, specific gravity, and starch content in tubers were reduced in all varieties as the salt concentration increased. Glucose content tended to decrease according to the salt concentration. In ANOVA analysis of mineral contents, there were significant differences in $K^+$ and $Mg^{2+}$ of leaf and stem, in $Na^+$ of leaf and tuber, and also in $Ca^{2+}$ of leaf by the interactions of variety and salinity. In the case of $K^+/Na^+$ and $Ca^{2+}/Na^+$, the stem was more sensitively influenced by the salt treatment than the leaf or the tuber. The $K^+/Na^+$ and $Ca^{2+}/Na^+$ decreased in leaf, stem, and tuber of four varieties, as the salt concentration became higher. The decreasing level varied according to the varieties. 'Kroda' and 'Duback' maintained relatively higher $K^+/Na^+$ and $Ca^{2+}/Na^+$ than 'Atlantic' or 'Goun' under the salt stress conditions. CONCLUSION: The composition and accumulation of minerals in potato plant as well as dry matter ratio, starch, and glucose contents were significantly influenced by salt stress. The respond patterns were different depending on the varieties and it was related to the salt tolerance among varieties.

Isolation and Characterization of Elastase Inhibitor from Areca catechu (빈랑으로부터 Elastase 저해물질의 분리 및 특성조사)

  • 조중제;이건국;조병기;최정도
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.26 no.1
    • /
    • pp.163-186
    • /
    • 2000
  • We have previously screened 150 medicinal plants on the inhibition of elastase and found a significant inhibitory effects of the extracts of Areca catechu L. on the aging and inflammation against the skin tissues. To isolate and identify the compounds having biological activity, we was further purified by each of the solvent fractions, silica gel column chromatography, preparative TLC and reversed-Phase HPLC. Peak in HPLC, which coincided with the inhibitory activity against elastase, was identified as Phenolic substance using various colorimetric methods, UV, and IR. $IC_{50}$/ values of phenolic substance purified from Areca catechu were 26.9 $\mu\textrm{g}$/$m\ell$ for porcine pancreatic elastase (PPE) and 60.8 $\mu\textrm{g}$/$m\ell$ for human neutrophil elastase (HNE). This Phenolic substance showed more potent activity than those of reference compounds, oleanolic acid (76.5 $\mu\textrm{g}$/$m\ell$ for PPE, 219.2 $\mu\textrm{g}$/$m\ell$ for HNE) and ursolic acid (31.0 $\mu\textrm{g}$/$m\ell$ for PPE, 118.6 $\mu\textrm{g}$/$m\ell$ for HNE). According to the Lineweaver-Burk Plots, the inhibition against both PPE and HNE by this phenolic substance was competitive with substrate. Phenolic substance from Areca catechu exhibited high free radical scavenging effect ($SC_{50}$/ : 6 $\mu\textrm{g}$/$m\ell$) and inhibited effectively hyaluronidase activity ($IC_{50}$/: 210 $\mu\textrm{g}$/$m\ell$). These results suggest that the Phenolic substance Purified from Areca catechu showed anti-aging effect by protecting connective tissue proteins.

  • PDF