• 전기화학회지
• /
• 제3권4호
• /
• pp.235-240
• /
• 2000

고출력 전기화학 캐패시터를 위한 전극제조공정으로 screen printing과 doctor blade법이 연구되었다. Screen printing에 의해서 제작된 비정질 $MnO_2$전극으로 측정된 CV (cyclic voltammogram)는 이상적인 캐패시터에 가까운 특성을 보여주었다. 50mV/s의 scan rate에서의 CV로부터 계산된 비용량은 $140{\mu}m,\;24{\mu}m,\; 3{\mu}m$의 전극두께에 대해서 각각 5.8F/g과, 81.8F/g, 172.0F/g의 값을 나타내었다. Screen printing전극에서의 $MnO_2$활물질의 이용율을 $100\%$로 하였을 때, paste와 doctor blade법의 이용율은 각각 $3.4\%$와 $47.6\%$이었다. Screen printing은 고출력 응용을 위한 얇은 전극의 코팅 방법으로 우수한 특성을 보였다.

• 대한치과교정학회지
• /
• 제34권5호
• /
• pp.429-438
• /
• 2004

본 연구는 Plasma arc light를 이용하여 금속 브라켓의 부착시 광조사 방향, 중합시간 그리고 경화시간이 전단결합강도에 미치는 영향을 평가하기 위해서 시행되었다. 240개의 발거된 소구츠를 16군으로 나눈 후. 광중합기(Plasma arc light와 Halogen light), 중합시간(Plasma arc light 2. 4. 6초와 Halogen light 20초). 그리고 광조사 방향(Vertical 방향과 Oblique 방향)을 다르게 하여 브라켓을 부착하였다. 광증합 접착제는 Transbond XT를 이용하였으며 브라켓 부착 후 5분과 24시간 후에 만능물성시험기를 이용하여 전단결합강도를 측정하였다. 결과는 다음과 같다. 광중합기의 종류와 중합시간에 관계없이 Vertical군과 Oblique군간의 전단결합강도는 유의한 차이가 없었다.(p>0.05) Plasma arc light를 이용하여 2초 동안 광중합한 군들의 전단결합강도는 다른 중합시간의 군들보다 현저히 낮았다(P<0.05). 부착 5분 후의 전단결합강도는 24시간 후보다 현저히 낮았다(P<005), ARI 점수는 군들 간에 통계적으로 유의한 차이가 없었다. 이상의 결과는 plasma arc light를 사용한 금속 브라켓의 부착시 광조사 방향은 전단결합강도에 영향을 끼치지 않으며. Halogen light와 유사한 결합강도를 얻기 위해서는 4초 이상의 중합시간이 필요함을 시사한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.198-199
• /
• 2006

$SrTa_2O_6$(STA) thin films were fabricated by sol-gel method. The films annealed below $700^{\circ}C$, showed amorphous phase and crystallization phase was observed after annealing over $800^{\circ}C$. From high frequency capacitance-voltage measurements, 24nm thick STA thin film annealed at $900^{\circ}C$, has an EOT of 5.7nm and a dielectric constant of 16. Leakage current characteristics were improved by the insertion of chemical oxide between STA and Si. Leakage current densities are around $3.5{\times}10^{-7}A/cm^2$ at 5V for the structure inserted chemical oxide but $1.4{\times}10^{-6}A/cm^2$ at 5V without chemical oxide.

• 한국응용과학기술학회지
• /
• 제11권1호
• /
• pp.7-16
• /
• 1994

Some seeds of the Rutaceae family, Zanthoxylum piperitum, Z. schinifolium officinalis, Poncirus trifoliata, Citrus unshin, were investigated to clarify their antioxidative components. Finely powdered samples were extracted by hexane, followed by dichioromethane and then 70% methanol in a hot bath. Its unsaponifiables containing X-and Y-tocopherol with trace amount of ${\beta}-and$\;{\delta}-tocopherol$. also showed comparatively weak activity, although the hexane fraction itself had no significant antioxidative effect on lard. Levels of total tocopherols in the samples averages 42. 24-154. 11 mg/lOOg total extractives. The dichloromethane-and 70% methanol extractives showed strong antioxidative activity, from which antioxidative substances were purified with benzene-acetone(6:5, V/V) on a silica gel column, and with a solvent mixture of acetonitrile-methanol-$H_2O$(40:40:20, V/V/V) on a Sep-Pak $C_{18}$ hydrolyzed by 5% KOH-ethanol. The recovered unsaponifiables were, then, separated on a column of high performance liquid chromatography. The unsaponifiables produced by hydrolysis of the isolates from dichloromethane extractives has epi-catechin(40.0-57.1%) and (+)-catechin<$l9.1{\sim}24.4%$ to total phenolic substances, on area base) as major component, accompanied by chlorogenic acid, gallic acid(?), trans-p-coumaric acid and tralls-p-ferulic acid including some unknown components, and those derived from 70% methanol extractives also comprise (+)-catechin($31.3{\sim}39.6%$ to total components, on area base), epi-catechin($2O.2{\sim}36.4%$), trans-p-cournaric acid(8.4-15.3%) and trans-p-ferulic acid($7.7{\sim}14.1%$) as predominant component with some minor coponents, but the fraction supposed to be gallic acid(?) is not present. The antioxidative activities of the phenolic components isolated in this work were in order of epi-catechin>catechin>chlorogenic acid>trans-p-ferluic acid>trans-p-coumaric acid.

• 한국결정성장학회지
• /
• 제24권5호
• /
• pp.213-218
• /
• 2014

Anatase $TiO_2$에 각기 다른 텅스텐(W) 함유원료와 제조방법을 적용하여 $WO_3$ 촉매가 첨가된 SCR(selective catalytic reduction)용 분말을 합성하였으며, W 촉매 첨가가 합성분말의 상합성 및 SCR 촉매능에 미치는 영향에 대해 연구하였다. 촉매의 지지체인 $TiO_2$는 침전법으로 anatase 상으로 합성되었으며, anatase에서 고온상인 rutile로의 상전이 온도는 $1200^{\circ}C$였으나, $WO_3$를 10 wt% 첨가할 경우 이 상전이 온도는 $900^{\circ}C$로 낮아졌다. 건식으로 $WO_3$ 분말을 직접 첨가하여 $WO_3(10wt%)/TiO_2$를 제조한 경우 $350^{\circ}C$에서 $NO_X$ 제거 촉매능이 최고점에 이르나 온도증가에 따라 그 효율이 상당히 감소하였다. 암모늄-메타-텅스테이트를 습식으로 첨가하여 제조한 경우, 보다 고온인 $450^{\circ}C$에서 촉매능이 최고점에 이르렀으며 온도에 따른 효율감소 폭도 적었다. 이와 같은 경향은 $WO_3$와 $V_2O_5$를 동시 첨가하여 제조한 $V_2O_5(5wt%)-WO_3(10wt%)/TiO_2$ 촉매에서도 나타났다. 즉, 암모늄-메타-텅스테이트를 습식으로 첨가한 경우, $WO_3$를 직접 첨가한 경우에 비해 넓은 온도범위($300^{\circ}C{\sim}500^{\circ}C$)에 걸쳐 90 %에 이상의 우수한 $NO_X$ 변환효율을 보였다.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.6-12
• /
• 2014

In the present work, $WO_3$ and $WO_3-TiO_2$ were prepared by the chemical deposition method. Structural variations, surface state and elemental compositions were investigated for preparation of $WO_3-TiO_2$ sonocatalyst. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and transmission electron microscopy (TEM) were employed for characterization of these new photocatalysts. A rhodamine B (Rh.B) solution under ultrasonic irradiation was used to determine the catalytic activity. Excellent catalytic degradation of an Rh.B solution was observed using the $WO_3-TiO_2$ composites under ultrasonic irradiation. Sonocatalytic degradation is a novel technology of treating wastewater. During the ultrasonic treatment of aqueous solutions sonoluminescence, cavitaties and "hot spot" occurred, leading to the dissociation of water molecules. In case of a $WO_3$ coupled system, a semiconductor coupled with two components has a beneficial role in improving charge separation and enhancing $TiO_2$ response to ultrasonic radiations. In case of the addition of $WO_3$ as new matter, the excited electrons from the $WO_3$ particles are quickly transferred to $TiO_2$ particle, as the conduction band of $WO_3$ is 0.74 eV which is -0.5 eV more than that of $TiO_2$. This transfer of charge should enhance the oxidation of the adsorbed organic substrate. The result shows that the photocatalytic performance of $TiO_2$ nanoparticles was improved by loading $WO_3$.

• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.480-485
• /
• 2011

ZnO is an n-type semiconductor with a wide band gap near 3.37 eV. It was known that ZnO films with a resistivity of the order of $10^{-4}\;{\Omega}cm$ is not easy to obtain. 1, 3, and 5wt% Si element were added into ZnO in ordre to improve the electrical and optical characteristics. The Si-doped ZnO (SZO) was grown on a glass substrate by radio frequency (RF) magnetron sputtering at the temperature range from 100 to $500^{\circ}C$. X-ray diffraction (XRD) patterns of SZO film showed preferable crystal orientation of (002) plane. It was confirmed that the lowest resistivity of the SZO films was $2.44{\times}10^{-3}{\Omega}cm$ and SZO films were significantly influenced by the working temperature. The average transmittance of the films was over 80% in the visible ranges.

• 한국표면공학회지
• /
• 제13권1호
• /
• pp.8-15
• /
• 1980

The critical voltage of hard coat range of Al alloys (K 186, 43S) at various electrolytes and the effects of voltage, temperature of electrolytes and concentration of sulfric acid were investigated, m the hope that to find the adequate voltage. Two kind of A1 alloys were anodized in three typical electrolytes and micro vickers hardness of the films were measured. With respect to the relationship between the hardness of the film and the voltage The result of this experiment are as fallows. 1. The critical voltage of hard coat rangs for the electrolytes $H_2SO_4\;10%,\;H_2SO_4\;10%\;+\;H_2C_2O_4\;2H_2O\;10g/l,\;H_2SO_4\;10%\;+\;NaHSO_4\;5%$ was 20V 22V 24V respectively. 2. $H_2SO_4\;10%\;+\;NaHSO_4$ 5% electrolyte was most adventageous among the three electrolyte in the respect of hardness. 3. The effect of concentration of sulphuric acid was not appeared.

• 환경위생공학
• /
• 제16권2호
• /
• pp.9-16
• /
• 2001

If a pollutant invade at liguid and gas, it will be use ozone in order to remove or sterilize. Ozone excessively supply in order to receive satisfactory efficiency. If excessive ozone leave like that, second-problem will be occur. This study used high heater in order to treat occurred ozone. ; the results were as follow : 1. As initial ozone os supplied with $1.789{\;}g/m^3$ : For the 40, 50, 60, 70(V) of electric potential $O_3$ removal efficiency was treated 34.41, 73.78, 98.60, 98.97%(time of operation ; after 5min.). 2. As initial ozone is supplied with $3.645{\;}g/m^3$ : For the 40, 50, 60, 70(V) of electric potential, $O_3$ removal efficiency was treated 1.78, 69.27, 99.18, 98.68%(time of operation ; after 5min.). 3. As initial ozone is supplied with $4.759{\;}g/m^3$ : For the 50, 60, 70(V) of electric potential, $O_3$ removal efficiency was treated 61.29, 99.29, 99.18%(Time of operation ; after 5min.). 4. Used electric power is 15.38, 24.00, 35.29, 46.15(w/hr) at the 40, 50, 60, 70(V) of the electric potential. 5. Regarding electric power and $O_3$ removal efficiency, Used electric pote-ntial economized at 60(V).

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.15-15
• /
• 2002

Homogeneous and crack-free potassium lithium niobate (K₃Li/sub 2-x/Nb/sub 5+x/O/sub 15/, 0＜x＜0.5, KLN) single crystals were successfully grown by the Czochralski technique. The KLN single crystals of several different compositions were employed for the investigation of the lattice vibration spectra using infrared Raman spectroscopy. The characteristic Raman spectra of the [NbO/sub 6/]/sup 7-/ octahedral ions were strikingly influenced by the Li ion content. The symmetric stretch vibrational modes V₁, V₂ are broadened, and the symmetric bend vibration mode V/sub 5/ is broadened and even split into three peaks with increasing the Li content, supporting that the bend vibration modes of the [NbO/sub 6/]/sup 7-/ octahedrons are obviously perturbed by Li ions in the C site. Enhanced Raman peak intensities after the post annealing at 900℃ and for 24 h evidenced that a residual stress in as-grown crystals was negligible and only a defect concentration might be reduced.