• 제목/요약/키워드: %24De-NO_x%24

검색결과 12건 처리시간 0.021초

순산소 순환유동층에서 로내 탈황 및 탈질법 적용에 따른 오염물질 거동특성 (Pollutants Behavior in Oxy-CFBC by Application of In-Furnace deSOx/deNOx Method)

  • 최경구;나건수;신지훈;길상인;이정규;허필우;윤진한
    • 청정기술
    • /
    • 제24권3호
    • /
    • pp.212-220
    • /
    • 2018
  • 순산소 연소기술은 화력발전에 적용 가능한 유망한 온실가스 감축 기술로 평가되고 있다. 본 연구는 환경적 관점에서 순환유동층을 활용한 순산소 연소조건에 로 내 탈황 및 탈질법을 적용하여 NO 및 $SO_2$의 거동을 살펴보는 한편, $SO_3$, $NH_3$, 그리고 $N_2O$의 발생 경향도 관측하였다. 이를 위해, 연소로 내 석회석 및 요소수를 투입하였다. 로 내 탈황법은 연소가스 내 $SO_2$ 농도를 ~403에서 ~41 ppm까지 저감하였다. 또한 $SO_3$ 형성의 주원료인 $SO_2$가 저감되면서 연소가스 내 $SO_3$ 농도도 ~3.9에서 ~1.4 ppm까지 감소되었다. 그러나 석회석 내 $CaCO_3$가 NO의 발생을 촉진하는 현상도 관측되었다. 연소가스 내 NO 농도는로 내 탈질법을 적용하여 ~26 - 34 ppm까지 저감되었다. 요소수 투입량 증가에 따라 연소가스 내 $NH_3$ 농도가 증가하여 최대 ~1.8 ppm으로 나타났으며, $N_2O$의 농도도 ~61에서 ~156 ppm까지 증가하였다. $N_2O$ 발생량 증가 현상은 요소수의 열분해 과정에서 생성된 HNCO가 $N_2O$로 전환되어 나타난다. 본 연구의 결과를 통해 로 내 연소가스 세정법을 적용할 경우 $NO_x$$SO_x$의 저감뿐만 아니라, 다른 오염물질의 발생에 대한 주의가 필요할 것으로 보인다.

디젤 자동차용 LNT, SCR 촉매의 배출가스 흡착, 탈리 및 열화 특성 (Characteristics of Adsorption, Desorption of Exhaust Gases and Deactivation of LNT and SCR Catalysts for Diesel Vehicles)

  • 서충길;김화남;최병철
    • 동력기계공학회지
    • /
    • 제14권6호
    • /
    • pp.13-19
    • /
    • 2010
  • 이 논문에서는 디젤자동차용 LNT와 SCR 촉매의 NO, $NH_3$ 흡착 및 탈리의 기본 특성과 수열화 온도와 시간 및 정량화된 황피독 농도에 대한 de-$NO_x$ 촉매의 내구성을 평가하였다. LNT 촉매는 열적으로 열화됨에 따라 Pt 및 Ba의 소결 및 응집으로 활성이 떨어져 $NO_x$ 전환율은 감소하였다. 반면에 Pt의 비활성화로 중간생성물인 $NH_3$ 생성량은 증가하였으며, 이때 생성된 $NH_3$는 LNT+SCR 복합시스템의 SCR 촉매의 환원제 역할을 담당한다. 1.0 g/L 이상의 황이 피독된 LNT 촉매는 탈황을 하여도 질소 산화물 흡장물질(Ba) 의 성능이 회복이 되지 않아 $NO_x$ 전환율은 회복되지 않았으며, 탈황 후 Pt 재활성화로 인해 NO2 및 SCR 환원제인 $NH_3$ 생성량은 증가하였다. SCR 촉매의 $NO_x$ 전환율은 $700^{\circ}C$ 36h, $800^{\circ}C$ 24h로 수열화 시킨 촉매는 전이금속 입자 성장 및 zeolite 구조 파괴로 인하여 급격하게 떨어졌으며, 0.36 g/L 황 피독된 촉매는 zeolite가 가지는 강산성 특정으로 내피독성이 강하여 탈황시 $NO_x$ 전환율은 회복되었다.

산화촉매를 이용한 Fast SCR에서의 SCR 촉매 저감 연구 (A Study for SCR Catalyst Reduction in Fast SCR Using Oxidation Catalyst)

  • 이재옥;이대훈;송영훈;오동규;서정욱
    • 공업화학
    • /
    • 제24권3호
    • /
    • pp.333-336
    • /
    • 2013
  • 산업현장에서 배출되는 저온($150{\sim}250^{\circ}C$)의 배기가스에 포함된 질소산화물($NO_x$)을 제거하기 위한 공정으로써 산화 촉매와 암모니아 SCR 공정을 복합시킨 fast SCR 탈질공정에 대한 실험적인 연구가 수행되었다. Fast SCR 탈질공정을 위해서는 산화촉매를 이용 NO를 $NO_2$로 전환하는 것이 요구된다. 산화촉매 부피(Oxidation Catalyst Volume, OCV)에 따른 NO 전환율을 실험적으로 확인하였다. OCV 563000 h, 375000 h, 281000 h 각 경우에 NO 전환율은 37% : 45% : 51%이었다. 온도에 따른 fast SCR 탈질효율은 $NO_2/NO_x$ 비율 45%일 때 가장 높았다. $NO_2/NO_x$ 비율 45%, 온도 $200{\sim}250^{\circ}C$ 및 공간속도 $10000{\sim}30000h^{-1}$에서 standard SCR과 fast SCR 탈질효율을 비교한 결과, standard SCR은 공간속도 에 따라 온도별로 차이를 보였으나 fast SCR은 차이를 보이지 않았다. Fast SCR 반응을 고려한 탈질운전에서 공간속도 $10000h^{-1}$에서의 촉매부피와 비교하여 공간속도 $30000h^{-1}$으로 운전할 경우, NH3 SCR 촉매부피를 50% 이상 줄일 수 있음을 알 수 있었다.

Push-out bond strength of a self-adhesive resin cement used as endodontic sealer

  • Gurgel-Filho, Eduardo Diogo;Lima, Felipe Coelho;Saboia, Vicente De Paula Aragao;Coutinho-Filho, Tauby De Souza;Neves, Aline De Almeida;da Silva, Emmanuel Joao Nogueira Leal
    • Restorative Dentistry and Endodontics
    • /
    • 제39권4호
    • /
    • pp.282-287
    • /
    • 2014
  • Objectives: The aim of the present study was to investigate the bond strength of RelyX Unicem (3M) to root canal dentin when used as an endodontic sealer. Materials and Methods: Samples of 24 single-rooted teeth were prepared with Gates Glidden drills and K3 files. After that, the roots were randomly assigned to three experimental groups (n = 8) according to the filling material, (1) AH Plus (Dentsply De Trey GmbH)/Gutta-Percha cone; (2) Epiphany SE (Pentron)/Resilon cone; (3) RelyX Unicem/Gutta-Percha cone. All roots were filled using a single cone technique associated to vertical condensation. After the filling procedures, each tooth was prepared for a push-out bond strenght test by cutting 1 mm-thick root slices. Loading was performed on a universal testing machine at a speed of 0.5 mm/min. One-way analysis of variance and Tukey test for multiple comparisons were used to compare the results among the experimental groups. Results: Epiphany SE/Resilon showed significantly lower push-out bond strength than both AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p < 0.05). There was no significant difference in bond strength between AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p > 0.05). Conclusions: Under the present in vitro conditions, bond strength to root dentin promoted by RelyX Unicem was similar to AH Plus. Epiphany SE/Resilon resulted in lower bond strength values when compared to both materials.

Fractal dimension analysis as an easy computational approach to improve breast cancer histopathological diagnosis

  • Lucas Glaucio da Silva;Waleska Rayanne Sizinia da Silva Monteiro;Tiago Medeiros de Aguiar Moreira;Maria Aparecida Esteves Rabelo;Emílio Augusto Campos Pereira de Assis;Gustavo Torres de Souza
    • Applied Microscopy
    • /
    • 제51권
    • /
    • pp.6.1-6.9
    • /
    • 2021
  • Histopathology is a well-established standard diagnosis employed for the majority of malignancies, including breast cancer. Nevertheless, despite training and standardization, it is considered operator-dependent and errors are still a concern. Fractal dimension analysis is a computational image processing technique that allows assessing the degree of complexity in patterns. We aimed here at providing a robust and easily attainable method for introducing computer-assisted techniques to histopathology laboratories. Slides from two databases were used: A) Breast Cancer Histopathological; and B) Grand Challenge on Breast Cancer Histology. Set A contained 2480 images from 24 patients with benign alterations, and 5429 images from 58 patients with breast cancer. Set B comprised 100 images of each type: normal tissue, benign alterations, in situ carcinoma, and invasive carcinoma. All images were analyzed with the FracLac algorithm in the ImageJ computational environment to yield the box count fractal dimension (Db) results. Images on set A on 40x magnification were statistically different (p = 0.0003), whereas images on 400x did not present differences in their means. On set B, the mean Db values presented promising statistical differences when comparing. Normal and/or benign images to in situ and/or invasive carcinoma (all p < 0.0001). Interestingly, there was no difference when comparing normal tissue to benign alterations. These data corroborate with previous work in which fractal analysis allowed differentiating malignancies. Computer-aided diagnosis algorithms may beneficiate from using Db data; specific Db cut-off values may yield ~ 99% specificity in diagnosing breast cancer. Furthermore, the fact that it allows assessing tissue complexity, this tool may be used to understand the progression of the histological alterations in cancer.

Effects of radiant exposure and wavelength spectrum of light-curing units on chemical and physical properties of resin cements

  • Lima, Adriano Fonseca;Formaggio, Stephanie Ellen Ferreira;Zambelli, Ligia Franca Aires;Palialol, Alan Rodrigo Muniz;Marchi, Giselle Maria;Saraceni, Cintia Helena Coury;de Oliveira, Marcelo Tavares
    • Restorative Dentistry and Endodontics
    • /
    • 제41권4호
    • /
    • pp.271-277
    • /
    • 2016
  • Objectives: In this study, we evaluated the influence of different radiant exposures provided by single-peak and polywave light-curing units (LCUs) on the degree of conversion (DC) and the mechanical properties of resin cements. Materials and Methods: Six experimental groups were established for each cement (RelyX ARC, 3M ESPE; LuxaCore Dual, Ivoclar Vivadent; Variolink, DMG), according to the different radiant exposures (5, 10, and $20J/cm^2$) and two LCUs (single-peak and polywave). The specimens were made (7 mm in length ${\times}$ 2 mm in width ${\times}$ 1 mm in height) using silicone molds. After 24 hours of preparation, DC measurement was performed using Fourier transform infrared spectrometry. The same specimens were used for the evaluation of mechanical properties (flexural strength, FS; elastic modulus, E) by a three-point bending test. Data were assessed for normality, after which two-way analysis of variance (ANOVA) and post hoc Tukey's test were performed. Results: No properties of the Variolink cement were influenced by any of the considered experimental conditions. In the case of the RelyX ARC cement, DC was higher when polywave LCU was used; FS and E were not influenced by the conditions evaluated. The LuxaCore cement showed greater sensitivity to the different protocols. Conclusions: On the basis of these results, both the spectrum of light emitted and the radiant exposure used could affect the properties of resin cements. However, the influence was material-dependent.

선박 배연탈질용 금속 구조체 기반 촉매 제조를 위한 코팅슬러리 최적화 (Optimum Synthesis Conditions of Coating Slurry for Metallic Structured De-NOx Catalyst by Coating Process on Ship Exhaust Gas)

  • 정해영;김태용;임은미;임동하
    • 청정기술
    • /
    • 제24권2호
    • /
    • pp.127-134
    • /
    • 2018
  • 국제해사기구에서는 선박 배기가스 내 질소산화물($NO_x$) 배출에 대한 강화된 Tier III 규제가 2016년부터 적용됨에 따라 이를 대응하기 위한 노력이 필요하다. $NO_x$ 저감 방법으로 선택적 촉매 환원법(Selective catalytic reduction, SCR)을 주로 사용하고 있으며, 세라믹 허니컴 촉매를 주로 사용하고 있다. 그러나 기존의 세라믹 허니컴 촉매는 약한 강도로 인하여 운전상 문제가 발생하거나 유지 및 보수에 있어서도 어려움을 갖는 단점을 가지고 있다. 본 연구에서는 세라믹 허니컴 촉매의 단점들을 보완하기 위하여 높은 열적 안정성과 기계적 강도를 가짐과 동시에 배기가스의 다방향성 이동을 통한 낮은 배압효과 등의 장점을 가지는 금속 지지체를 적용하였다. 이러한 금속 지지체 상에 촉매를 담지하기 위하여 유 무기바인더 첨가를 통해 코팅슬러리를 제조하고, 이를 코팅, 건조 및 소성과정을 통해 금속 지지체 상에 견고하게 부착된 금속 지지체 기반 촉매를 제조하였다. 이러한 금속 지지체 기반 촉매는 $NO_x$ 성능평가와 초음파 및 낙하시험을 통한 접착 내구성 평가를 수행하였다. 특히, 무기바인더를 첨가한 MFC01경우 95% 이상의 $NO_x$ 전환율을 보였으며, 상용 세라믹 허니컴 촉매보다도 우수한 내구성을 보였다. 이러한 특성 및 성능평가를 통하여 개발된 금속 지지체 기반 촉매는 고효율, 고내구성을 가짐을 확인하였으며, 기존 세라믹 허니컴 촉매를 대체할 수 있는 선박용 배연탈질 촉매로서의 가능성을 확인하였다.

Carcass Characteristics and Qualitative Attributes of Pork from Immunocastrated Animals

  • Caldara, Fabiana Ribeiro;Moi, Marta;Santos, Luan Sousa Dos;Paz, Ibiara Correia De Lima Almeida;Garcia, Rodrigo Garofallo;Naas, Irenilza De Alencar;Fernandes, Alexandre Rodrigo Mendes
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권11호
    • /
    • pp.1630-1636
    • /
    • 2013
  • An investigation was carried out to assess the carcass characteristics and meat quality aspects of immunocastrated male pigs of medium genetic potential for lean meat deposition in carcass (53 to 55%). When the crossbred Large White x Landrace pigs (n = 45) were 70 days old, they were distributed in a totally randomized design in three treatments (castrated males, females and immunocastrated males) with three replicates of five animals. The pigs were slaughtered when they were 140 days old. Carcass temperature and pH were recorded twice, at 45 min and 24 h after slaughter. The carcasses were evaluated for hot and cold carcass yield, commercial cuts yield, length and depth, back fat thickness, loin eye area and lean meat percentage. The Longissimus dorsi muscle was extracted for analysis of color ($L^*$, $a^*$, $b^*$), exudate loss, cooking loss and centesimal and sensorial analysis of the meat. There were no significant differences for the evaluated parameters between castrated males, immunocastrated males and females, except for backfat thickness between the 7th and 8th thoracic vertebra and the point P2 (lower for immunocastrated males) and carcass temperature at 45 min post slaughter (higher in immunocastrated males), however, this did not interfer with the rate of pH decrease post mortem and the meat quality. The results from this research did not indicate a benefit of immunocastration on carcass characteristics of pigs of medium genetic potential for lean meat deposition in carcass, when compared to surgical castration.

Energy and Ileal Digestible Amino Acid Concentrations for Growing Pigs and Performance of Weanling Pigs Fed Fermented or Conventional Soybean Meal

  • Wang, Y.;Lu, W.Q.;Li, D.F.;Liu, X.T.;Wang, H.L.;Niu, S.;Piao, X.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제27권5호
    • /
    • pp.706-716
    • /
    • 2014
  • A new strategy of co-inoculating Bacillus subtilis MA139 with Streptococcus thermophilus and Saccharomyces cerevisiae was used to produce fermented soybean meal (FSBM). Three experiments were conducted to determine the concentration of digestible energy (DE) and metabolizable energy (ME) (Exp. 1), apparent ileal digestibility (AID) and standardized ileal digestibility (SID) of amino acids (AA) (Exp. 2), and feeding value (Exp. 3) of FSBM produced by this new strategy (NFSB) compared with soybean meal (SBM) and conventionally available FSBM (Suprotein). In Exp. 1, twenty-four barrows (initial body weight [BW] of $32.2{\pm}1.7kg$) were randomly allotted to 1 of 4 diets with 6 replicates per diet. A corn basal diet and 3 diets based on a mixture of corn and 1 of 3 soybean products listed above were formulated and the DE and ME contents were determined by the difference method. The results showed that there were no differences in DE and ME between SBM and either FSBM product (p>0.05). In Exp. 2, eight barrows (initial BW of $26.8{\pm}1.5kg$) were fitted with ileal T-cannulaes and used in a replicated $4{\times}4$ Latin square design. Three corn-starch-based diets were formulated using each of the 3 soybean products as the sole source of AA. A nitrogen-free diet was also formulated to measure endogenous losses of AA. The results showed that the SID of all AA except arginine and histidine was similar for NFSB and SBM (p>0.05), but Suprotein had greater (p<0.05) SID of most AA except lysine, aspartate, glycine and proline than NFSB. In Exp. 3, a total of 144 piglets (initial BW of $8.8{\pm}1.2$ kg) were blocked by weight and fed 1 of 4 diets including a control diet with 24% SBM as well as diets containing 6% and 12% NFSB or 12% Suprotein added at the expense of SBM. During d 15 to 28, replacing SBM with 6% NFSB significantly improved average daily gain (ADG) and average daily feed intake (ADFI) (p<0.05) for nursery piglets. During the overall experiment, ADG of piglets fed diets containing 6% NFSB was significantly greater (p<0.05) than that of piglets fed SBM. In conclusion, fermentation with the new strategy did not affect the energy content or the AID and the SID of AA in SBM. However, inclusion of 6% NFSB in diets fed to nursery piglets improved performance after weaning likely as a result of better nutritional status and reduced immunological challenge.

STZ-당뇨 흰쥐에서 규칙적인 Treadmill운동이 골격근 제 4 형 당수송체에 미치는 영향 (Effects of Regular Treadmill Running on GLUT4 Protein of Skeletal Muscle in STZ-diabetic Rats)

  • 김종연;배형일;박소영;김용운;이석강
    • Journal of Yeungnam Medical Science
    • /
    • 제15권2호
    • /
    • pp.341-349
    • /
    • 1998
  • STZ-당뇨 흰쥐에서 규칙적인 treadmill운동이 당 및 지질대사와 골격근 제 4 형 당수송체에 미치는 영향을 연구한 본 논문의 결과를 요약하면 다음과 같다. 규칙적인 운동시작시와 4주간 운동후의 체중증가는 정상군에 비하여 당뇨-대조군은 정상군의 72%수준으로 증가의 정도가 작았으나 운동에 의하여 정상군의 92% 수준으로 회복되었다. 혈장 포도당(mg/dl)은 정상군의 $103{\pm}6.4$에 비하여 당뇨-대조군은 $143{\pm}3.1$로 증가하였으나 운동에 의하여 $115{\pm}2.9$로 낮아졌다. 혈장 인슐린(${\mu}U/ml$)은 정상군의 $19{\pm}4.9$에 비하여 당뇨-대조군 및 당뇨-운동군에서 각각 $8{\pm}2.0$$9{\pm}2.1$로 낮았다. 혈장 유리지방산(${\mu}Eq/l$)은 정상군의 $469{\pm}33.6$에 비하여 당뇨-대조군 및 당뇨-운동군은 각각 $491{\pm}69.5$$398{\pm}91.8$로 각군간의 유의한 차이가 없었다. 혈장 중성지방(mg/dl)은 대조군의 $42{\pm}4.1$에 비하여 당뇨-대조군은 $58{\pm}7.2$로 높았으며 당뇨-운동군은 $47{\pm}5.4$로 운동에 의하여 개선되는 양상을 보였다. 혈장 총콜레스테롤(mg/dl)은 정상군의 $54{\pm}3.9$에 비하여 당뇨-대조군은 $64{\pm}5.2$로 다소 높았으나 통계적인 유의성은 없었으나 운동에 의하여 $43{\pm}3.2$로 정상군보다 오히려 감소하였다. HDL-콜레스테롤(mg/dl)은 정상군의 $22{\pm}0.8$에 비하여 당뇨-대조군 및 당뇨-운동군은 각각 $23{\pm}1.9$$24{\pm}1.3$으로 차이가 없었다. 골격근 당원 (mg/gm wet weight)은 족척근에서 정상군의 $3.2{\pm}0.46$에 비하여 당뇨-대조군은 $2.6{\pm}0.39$(정상군의 81%), 당뇨-운동군은 $2.4{\pm}0.47$(정상군의 75%)로 각각 낮았다. 체중에 대한 가자미근 무게 비 (x $10^{-4}$)는 정상군의 $4.58{\pm}0.259$에 비하여 당뇨-대조군은 $4.22{\pm}0.301$(정상군의 92%)로 낮았으나 당뇨-운동군은 $5.06{\pm}0.153$(정상군의 110%)으로 정상군보다도 오히려 높았다. 골격근 제 4 형 당수송체 단백은 가자미근에서 정상군에 비하여 당뇨-대조군에서 낮았으나 운동에 의하여 정상수준으로 회복되었다. 이상의 결과로 미루어 보아 규칙적인 트레드밀 운동은 당뇨유도에 의해 악화된 혈장 포도당과 중성지방, 총콜레스테롤을 개선시키는 작용을 가지며 혈장 포도당 개선 기전의 하나로서 운동이 당뇨유도에 의해 감소된 골격근 당수송체의 양을 증가시키는 것으로 사료된다.

  • PDF