• 제목/요약/키워드: %24C_4%24%24A_3%24S

검색결과 1,854건 처리시간 0.037초

서문보의 다기능 어도의 구조해석 (Structural Analysis of Multi-Functional Fishway in Seomoon Weir)

  • 이영재;이정신;장형규
    • Ecology and Resilient Infrastructure
    • /
    • 제7권4호
    • /
    • pp.308-319
    • /
    • 2020
  • 본 논문은 경북 영천시 서문보에 최근 건설된 다기능 어도의 현장 적용성을 검토하기 위해 해석 변수를 R/C Slab (S1), R/C+S/C Slab (S2) 및 지하이동통로 규격 (가로 × 세로)을 1.4 × 0.2 m, 1.4 × 0.3 m, 1.4 × 0.6 m와 유속 0.8 m/s, 1.2 m/s, 1.6 m/s 으로 구분하여 해석한 결과 서문보 설계식 안전성을 평가하였다. 서문보의 설계식 보다 R/C+S/C Slab타입이 지하이동통로 출구부는 휨모멘트와 최대응력은 각각 16 - 33%, 24 - 32%, 측벽은 각각 17 - 33%, 20 - 36%, 상부슬래브인 경우도 19 - 33%, 9 - 28% 적게 나타났다. 따라서 최대응력과 휨모멘트가 R/C+S/C Slab 타입이 구조 안전성이 확보되는 것으로 나타났다. 따라서 지하통로는 휨모멘트와 최대 응력이 각각 14%, 18%, 측벽은 17%, 15% 상부슬래브는 16%, 11%의 보완이 요구되는 것으로 판단된다. 이러한 결과는 지하이동통로 규격이 서문보 규격과 동일한 1.4 × 0.3 m 일 때가 1.4 × 0.2 m, 1.4 × 0.6 m보다 안전성이 가장 유리한 것으로 확인되었다. 또한 해석 및 분석 결과를 근거로 서문보 규모의 다기능 어도 적용 시 기본 자료로 활용이 기대된다.

광조사 방식이 복합레진 수복물의 변연누출에 미치는 영향 (EFFECT OF LIGHT IRRADIATION MODES ON THE MARGINAL LEAKAGE OF COMPOSITE RESIN RESTORATION)

  • 박은숙;김기옥;김성교
    • Restorative Dentistry and Endodontics
    • /
    • 제26권4호
    • /
    • pp.263-272
    • /
    • 2001
  • 저광도 중합법, 펄스 지연 중합법, 초고광도 중합법 등의 광조사 방식이 광중합형 복합레진 수복물에서의 중합수축 응력에 미치는 영향을 알아보기 위해 in vitro에서 미세 누출 실험을 하였다. 80개의 발거된 소구치의 협측면에 5급 와동을 형성하고, 600mW/$cm^2$로 30초간 광조사하는 보통 광도 중합군, 300mW/$cm^2$로 60초간 광조사하는 저광도 중합군, 400mW/$cm^2$로 2초간 광조사하고 5분간 기다린 후 800mW/$cm^2$로 10초간 최종 중합시키는 펄스-지연 중합군, 그리고 1930mW/$cm^2$의 광도로 3초간 광조사하는 초고광도 중합군 등의 4개의 군으로 나누어 hybrid 형의 광중합복합레진을 충전하고 각 군의 방법대로 중합한 후, 변연의 0.5mm 외부에 nail varnish를 도포하고 37$^{\circ}C$, 2% metylene blue 용액에 24시간 동안 침적시켰다. 시편을 아크릴릭 레진에 매몰한 후 수복물의 중앙에서 종절단하여 입체현미경하에서 그 단면을 관찰한 후 법랑질과 상아질 변연으로 나누어 색소의 침투도를 측정하여 다음과 같은 결과를 얻었다. 1. 펄스 지연 중합군의 색소 침투도는 법랑질과 상아질 변연 모두에서 보통광도, 저광도 및 초고광도 중합군과 유의한 차이를 보이지 않았다(p>0.05). 2. 상아질 변연에서 초고광도 중합군은 보통광도 중합군과 저광도 중합군에 비해 유의하게 높은 색소 침투도를 보였다(p<0.05). 3. 법랑질 변연에서의 4개 군의 색소 침투도는 서로 유의한 차이를 보이지 않았다(p>0.05). 4. 모든 군에서 상아질 변연에서의 색소 침투도는 법랑질군에서의 색소 침투도에 비해 유의하게 높았다(p<0.05).

  • PDF

119구급대원의 재난관리 핵심역량에 관한 연구 (Core competency in disaster management of 119 paramedics)

  • 김진현;최은숙
    • 한국응급구조학회지
    • /
    • 제21권3호
    • /
    • pp.35-48
    • /
    • 2017
  • Purpose: The purpose of the study was to investigate the core competency of disaster management of 119 paramedics. Methods: A self-reported questionnaire was completed by 242 paramedics in C area from April 28 to May 12, 2017. The study instrument included general characteristics of the subjects (4 items), disaster experience, recognition, and preparedness (20 items), and importance and performance of disaster management core competency (24 items) by Likert 5-point scale. Data were analyzed using t-test, ANOVA, Pearson's correlation coefficient using IBM SPSS 24.0. Results: The seriousness of personal disaster was 4.02 points and the importance of disaster-related education was 4.28 points. The importance to core competency of disaster management was 4.39 points and the ability to perform core competency was 3.58 points. The seriousness of personal disaster and the importance of disaster-related education were positively correlated (r=.600, p=.000). The importance and ability to perform core competency were positively correlated (r=.389, p=.000). Conclusion: It is necessary to strengthen core competency of disaster management in paramedics who are the first defense line of disaster.

1 wt.% Bi 함유 무연황동의 인장강도와 내식특성에 대한 연구 (Characteristics of Tensile Strength and Corrosion Resistance of Lead- free Brass Containing 1 wt.% of Bi)

  • 주영석;이상봉;김시영;주창식;정병호
    • 열처리공학회지
    • /
    • 제24권3호
    • /
    • pp.133-139
    • /
    • 2011
  • This study has been investigated for tensile properties with lead-free brass containing 1 wt.% of Bi. And also characteristic of corrosion resistance was analyzed by polarization test. An increase of tempering temperature was found to tend to decrease tensile strength, and percentage of elongation was shown to be the lowest value at $300^{\circ}C$. On the other hand, the elongation was increased with an increase of tempering temperature after $300^{\circ}C$. The change of mechanical properties was closely related with the content and shape of acicular Witmanst$\ddot{a}$tten ${\alpha}$ formed at the interface of ${\beta}$ phase as well as in ${\beta}$ phase. Tensile strength had a tendency to be decreased with an increase of test temperature. The elongation was shown to be the lowest value at around $300^{\circ}C$, while it began to increase as test temperature rose after $300^{\circ}C$. It might be speculated that the reason that elongation was decreased was found to form bismuth film at the interface of ${\alpha}/{\beta}$ phase leading to be easily brittle when loaded by tensile stress. The lead-free brass containing 1 wt.% of Bi had similar characteristic of corrosion resistance with a free-cutting brass with 3.4 wt. % of Pb in spite of higher fraction of ${\beta}$ phase.

배추즙액을 기질로 이용한 Candida utilis 균체의 생산 (Production of Candida utilis Biomass on Chinese Cabbage Juice)

  • 이남석;경규항
    • 한국식품과학회지
    • /
    • 제24권3호
    • /
    • pp.221-225
    • /
    • 1992
  • 국내에서 대량생산될 수 있는 자생가능한 자원인 배추의 비전통적 이용을 위해 배추즙액에 효모 Candida utilis를 배양하여 단세포단백을 생산하는 연구를 하였다. 배추의 당함량은 $2.1{\sim}4.0%$의 범위에 있었고 배추원액을 그대로 사용하여 C. utilis를 배양했을 때보다는 배추즙액을 적절히 희석하여 배양하였을 때 증식속도가 빨라졌고 소비된 당에 대한 건조균체생산율도 17%에서 약 50% 정도로 향상되었다. 배추즙액에 C. utilis를 배양하여 단세포단백을 생산하고자 할 때는 당의 함량이 1.0% 정도로 희석하는 것이 적절하였고 당함량을 1.0%되게 조정한 배추희석액에 영양원을 첨가하여 그 영향을 평가해 보았을 때 glucose, $KH_2PO_4$$(NH_4)_2SO_4$는 첨가효과가 없거나 오히려 균체생산량을 감소시킨데 비하여 yeast extract나 peptone은 건조균체 생산 및 균체의 단백질 함량을 $10{\sim}20%$씩 증가시키는 효과가 있었으나 yeast extract나 peptone의 첨가량에 비해 건조균체생산량의 증가가 적어서 배추즙희석액 자체로만도 효모배양을 위한 좋은 기질임이 확인되었다.

  • PDF

씨고자리파리의 생태 및 기주식물에 대한 저항성 (Delia platura(Meigen): Bionomics and It`s Resistance to Host Plants)

  • 김태흥;조형찬
    • 한국응용곤충학회지
    • /
    • 제28권1호
    • /
    • pp.16-22
    • /
    • 1989
  • 전북 완주군 봉동지성의 골파단장을 중심으로 Delia속에 속하는 휴안용 4,000여 개체를 채집하여 사육실(24$\pm$$2^{\circ}C$, RH 70$\pm$5%, L: D=16h : 8h)에서 사육 및 동정, 연구의 공시충으로 하고, 생태 및 기주식물 저항성을 조사한 결과는 다음과 같다. 채집한 휴안용과 우화된 성충을 동정한 결과 씨고자리파리, D. Platura(Meigen)가 주요종으로 나타났다. 산란전기는 9 일이었으며, 성충의 생명은 암컷이 50(3~77)일로 숫컷의24(1`59)일보다 2배 정도 길었다. 광이 주어지는 이른새벽부터 아침에 가장 높은 우화율을 나타내었으며, 숫컷이 약 2~3일 먼저 우화하였다. 토양깊이에 따른 우화상황은 표면에서 가장 빨랐으며 깊이 에 따라 운연되었 다. 월다용은 4월중순부터 우화하기 시작하여 5월초순까지 계속되었으며 발생최성기는 4월말이었다. 자웅 성비는 1 : 1. 02이었으며, 우화율은 휴안용이 79.63%로 비휴안용의 91. 16%보다 현저히 낮았다. 실험실에서 유충먹이로 양파가 선호성을 보였다. 기주별 산란선호성은 완두와 유채가 검정콩이나 팥보다 현저하게 높았고, 콩 품종별로는 밀양 17호와 백운이 현저하게 낮았다. 유충에 대한 콩 품종의 감수성은 남천이 가장 높았다.

  • PDF

계절에 따른 길거리 제조 식품의 미생물 오염 특성 (Microbial Quality of Street Foods Sold by Season)

  • 서영호
    • 동아시아식생활학회지
    • /
    • 제24권4호
    • /
    • pp.481-487
    • /
    • 2014
  • 본 연구는 대도시지역(서울, 대전, 부산, 광주)에서 판매되는 길거리 식품(김밥, 어묵, 순대)에 대한 미생물 모니터링 검사를 실시하여, 이들 제품에 대한 위생 안전성 확보를 위한 기초 자료를 제공하기 위해 진행되었다. 김밥의 총호기성균은 5.1~9.9 log CFU/g으로 검출되었으며, 여름철에 가장 높게 검출되었다. 호냉성균은 총호기성균과 유사한 패턴으로 검출되었으며, 여름철에 수거된 순대 7건에서 6.0~7.9 log CFU/g 수준으로 검출되었다. Total coliform은 53.6%의 검출률을 나타내었으며, 김밥의 70.8%에서 4.0 log CFU/g 이상 검출되었다. E. coli는 김밥과 순대에서 15건이 검출되었으며, 어묵에서는 검출되지 않았다. 식중독균중 S. aureus가 28건(7.8%)이 검출되었으며, C. perfringens는 12건(3.3%)이 검출되었다. 특히 김밥에서 S. aureus, C. perfringens가 각각 24건, 10건에서 검출되어 식중독 발생 가능성이 높은 것으로 판단되었다. 그리고 계절별로 보면 겨울에 비해 봄, 여름의 검출률이 높았으며, 지역별로 보면 부산지역에서 가장 높은 검출률을 보였다.

Synthesis and Characterization of Bifunctional Organic-Glasses Based on Diphenylhydrazone and Barbituric Acid Derivative for Photorefractive Application

  • Lee, Sang-Ho;Choi, Chil-Sung;Kim, Nak-Joong;Choi, Dong-Hoon;Park, Ki-Hong
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권12호
    • /
    • pp.1793-1798
    • /
    • 2003
  • A series of amorphous molecules that possess both photoconductive and electro-optic properties was synthesized in order to investigate photorefractive properties of bifunctional organic-glasses. Diethylaminobenzaldehyde-diphenylhydrazone was covalently attached to 5-(4-diethylamino-benzylidene)-1,3-dimethylpyrimidine-2,4,6-trione through a flexible alkyl chain (3, 4, 5, 6 and 10 carbons) containing two ether linkages. The longer linkage not only lowered the glass transition temperature ($T_g$) of the molecules, but also allowed faster orientation of the chromophore. To examine the photorefractive properties, a 50 ${\mu}$m-thick film was prepared from the mixture of a bifunctional molecule, butyl benzyl phthalate, and $C_{60}$. The photoconductivity of this composite was as high as $8.01\;{\times}\;10^{-12}$ S/cm at 60 V/ ${\mu}$m, and the maximum diffraction efficiency ( ${\eta}_{max}$) of 50 ${\mu}$m-thick film was about 5% at 80 V/ ${\mu}$m.

Acetaminophen Induced Cytotoxicity and Altered Gene Expression in Cultured Cardiomyocytes of $H_9C_2$ Cells

  • Jin, Seon-Mi;Park, Kwang-Sik
    • Environmental Analysis Health and Toxicology
    • /
    • 제27권
    • /
    • pp.11.1-11.8
    • /
    • 2012
  • Objectives: Hepatotoxicity of acetaminophen has been widely studied. However, the adverse effects on the heart have not been sufficiently evaluated. This study was performed to investigate cytotoxicity and alterations of gene expression in cultured cardiomyocytes ($H_9C_2$ cells) after exposure to acetaminophen. Methods: $H_9C_2$ cells were incubated in a 10 mM concentration of acetaminophen for the designated times (6, 12, and 24 hours), and cytotoxicity was determined by the 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method. Alteration of gene expression was observed by microarray analysis, and RT-PCR was performed for the three representative oxidative stress-related genes at 24 hours after treatment. Results: It revealed that acetaminophen was toxic to cardiomyocytes, and numerous critical genes were affected. Induced genes included those associated with oxidative stress, DNA damage, and apoptosis. Repressed genes included those associated with cell proliferation, myocardial contraction, and cell shape control. Conclusions: These findings provide the evidences of acetaminophen-induced cytotoxicity and changes in gene expression in cultured cardiomyocytes of $H_9C_2$ cells.

원형소재를 이용한 프로파일 다단 형상인발 공정설계 (Process Design for Multi-pass Profile Drawing using Round Materials)

  • 이인규;최창영;이상곤;정명식;이재욱;김다혜;조용재;김병민
    • 소성∙가공
    • /
    • 제24권4호
    • /
    • pp.234-240
    • /
    • 2015
  • Multi-pass shape drawing is very important to produce steel profiles in round samples. In the current study, a process design system is developed for a multi-pass shape drawing. In general, the number of passes for a multi-pass shape drawing is 2 to 3 when the reduction ratio, drawing stress, and productivity are considered. Therefore, calculating the drawing stress and designing the intermediated die shapes are very important. In order to calculate the drawing stress, a shape drawing load prediction method is proposed using a general axisymmetric drawing load prediction model. An intermediate die shape design method is proposed using the initial and the final product shapes. Based on this analysis, a process design system is developed for multi-pass shape drawing for steel profiles. The system works with AutoCAD. The system was applied to design a shape drawing of a spline.