• 한국표면공학회지
• /
• 제55권5호
• /
• pp.273-283
• /
• 2022

Al6061 aluminum alloy specimens were exposed to atmospheric conditions for maximum 24 months. 24-month exposure specimen showed some more frequent and larger size of corrosion products and pitting on the surface compared with the 12-month exposure specimens. The XRD examination revealed the dominant surface oxide phases of Al₂O₃ and Al(OH)₃. The oxide thickness at uniform oxidation (or non-pitting) region was not much changed over exposure time. The 1.2 ㎛ deep oxygen penetration area was found in the 12-months exposed specimen near the thin uniform aluminum oxide film. The line-EDS was conducted through the penetration regions and non-penetrated grain boundary. There were signs of O and Si concentration through the penetration region, whereas non-penetration region showed no concentration of O or Si. It was confirmed that pitting is a more severe degradation mode in Al6061 (max. >4 ㎛ deep) compared with the uniform oxidation (max. ~200 nm deep) up to 24-months exposure.

• 자원환경지질
• /
• 제43권3호
• /
• pp.269-278
• /
• 2010

우리는 단청안료의 착색제에 대한 특성을 살펴보았고, 이번 연구가 우리 전통 단청의 색을 재현하는데 기여하길 바란다. 광주 전남지역 목조 고건축물에서 자연적으로 박리가 일어난 부분의 단청안료 시료를 채취하고, 이를 XRD와 EDS-SEM분석을 이용하여 착색제를 분석하였다. 백색안료에서는 고대부터 착색제로 사용되어온 석고$(CaSO_4{\cdot}2H_{2}O)$,석영$(SiO_2)$, 백연석$(PbCO_3)$ 및 호분$(CaCO_3)$과 현대에서 많이 사용되는 산화지당$(TiO_2)$이 모든 시료에서 확인되었다. 적색안료에서는 고대부터 착색제로 사용된 석간주$(Fe_{2}O_{3})$와 연단$(Pb_{3}O_{4})$ 및 현대안료 착색제인 C. I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$이 확인 되었지만, 진사(cinnabar, HgS)는 관찰되지 않았다. 황색안료에서는 납을 주성분으로 하는 황연인 홍연석$(PbCrO_4)$과 고대부터 사용된 밀타승(PbO)이 확인되었다. 청색안료에서는 착색제인 소달라이트 $(Na_{4}BeAlSi_{4}O_{12}Cl)$와 노제안$(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$이 확인되었으며, 현대안료 착색제인 C. I. pigment blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ 도 확인되었다. 녹색안료에서는 착색제로 카루머타이트(calumetite, $Cu(OHCI)_{2}{\cdot}2H_{2}O$), 에스콜라이트$(Cr_{2}O_{3})$, 디크롬트리옥사이드(dichromium trioxide, $Cr_{2}O_{3}$), 에머랄드그린$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$ 및 현대안료 착색제인 C. I. pigment green$(C_{32}H_{16}-XCl_{x}Cu_{8})$이 확인되었다. 흑색안료에서는 먹(송연)이 확인 되었다.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.17-24
• /
• 1994

Al2O3-ZrO2(ZTA) composites were fabricated by a surface-induced coating of the precursor for the ZrO2 phase on the kinetically stable colloid particles of Al2O3. The fabricated composites were characterized by a uniform spatial distribution of the dispersed ZrO2 phase and by the absence of large ZrO2 grains throughout the Al2O3 matrix. The fracture toughness (KIC) and the bending strength of ZTA composites sintered at 1$600^{\circ}C$, respectively, were 5.6 MPa.m1/2 (for 20 wt% ZrO2) and 600 MPa (for 15wt% ZrO2). The fraction of tetragonal ZrO2 phase decreases as the total content of ZrO2, suggesting that both the stress-induced tlongrightarrowm transformation and the microcrack nucleation contribute to the toughening of the ZTA composites fabricated by the surface-induced coating.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.81-86
• /
• 2014

The nitrogen solubility and nitride capacity of $CaO-SiO_2-Al_2O_3-MgO-CaF_2$ slag systems were measured by using gas-liquid equilibration at 1773K. The nitrogen solubility of this slag system decreased with increasing CO partial pressure, with the linear relationship between nitrogen contents and oxygen partial pressure being -3/4. This system was expected to show two types of nitride solution behavior. First, the nitrogen solubility decreased to a minimum value and then increased with the increase of CaO contents. These mechanisms were explained by considering that nitrogen can dissolve into slags as "free nitride" at high basicities and as "incorporated nitride" within the network at low basicities. Also, the basicity of slag and nitride capacity were explained by using optical basicity. The nitrogen contents exhibited temperature dependence, showing an increase in nitrogen contents with increasing temperature.

• 한국자기학회지
• /
• 제9권6호
• /
• pp.296-300
• /
• 1999

DC 마그네트론 스퍼터링 방법으로 금속 마스크를 사용하여 십자형태로 substrate/Ta/NiFe/FeMn/NiFe/CoFe/Al2O3/CoFe/NiFe와 substrate/Ta/NiFe/CoFe/Al2O3/CoFe/NiFe/FeMn/NiFe 스핀 터널링 접합 구조를 제조하였다. 이러한 구조에서 절연층(Al2O3)의 형성조건과 각 층의 두께와 파워에 대한 증착율에 변화를 주어 24.3%의 자기 저항비를 얻었다. 두 종류의 구조에 대한 자기적 특성 비교와 Corning glass 7059와 Si(111) 기판의 종류에 따른 결과를 비교하였으며 소자 제조때 수반되는 온도변화에 대한 특성변화를 알아보고자 열처리를 하였다. 열처리 결과 자기 저항비는 15$0^{\circ}C$까지는 어느 정도 일정한 값을 유지하다가 18$0^{\circ}C$ 열처리 후 갑자기 감소하는 결과를 얻었다.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.67-72
• /
• 2014

Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties, including high strength, high hardness, excellent ductility and toughness. In this study, nanopowders of $Al_2O_3$, MgO and $TiO_2$ were prepared as starting materials by high energy ball milling for the simultaneous synthesis and sintering of the nanostructured compound $Mg_4Al_2Ti_9O_{25}$ by high-frequency induction heating process. The highly dense nanostructured $Mg_4Al_2Ti_9O_{25}$ compound was produced within one minute by the simultaneous application of 80MPa pressure and induced current. The sintering behavior, grain size and mechanical properties of the $Mg_4Al_2Ti_9O_{25}$ compound were evaluated.

• 한국재료학회지
• /
• 제24권5호
• /
• pp.259-265
• /
• 2014

$ZrO_2$ films were coated on aluminum etching foil by the sol-gel method to apply $ZrO_2$ as a dielectric material in an aluminum(Al) electrolytic capacitor. $ZrO_2$ films annealed above $450^{\circ}C$ appeared to have a tetragonal structure. The withdrawal speed during dip-coating, and the annealing temperature, influenced crack-growth in the films. The $ZrO_2$ films annealed at $500^{\circ}C$ exhibited a dielectric constant of 33 at 1 kHz. Also, uniform $ZrO_2$ tunnels formed in Al etch-pits $1{\mu}m$ in diameter. However, $ZrO_2$ film of 100-200 nm thickness showed the withstanding voltage of 15 V, which was unsuitable for a high-voltage capacitor. In order to improve the withstanding voltage, $ZrO_2$-coated Al etching foils were anodized at 300 V. After being anodized, the $Al_2O_3$ film grew in the directions of both the Al-metal matrix and the $ZrO_2$ film, and the $ZrO_2$-coated Al foil showed a withstanding voltage of 300 V. However, the capacitance of the $ZrO_2$-coated Al foil exhibited only a small increase because the thickness of the $Al_2O_3$ film was 4-5 times thicker than that of $ZrO_2$ film.

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1771-1774
• /
• 2003

CNTs have been synthesized by catalytic $C_2H_2$ decomposition through $Pd/Al_2O_3$ at low temperature. The CNTs were grown to a length of about 10 ${\mu}$m and diameter 150-200 nm with multiwalled structure. Pd catalysts have two major roles; one is the active catalyst for $C_2H_2$ decomposition, the other is a nucleation site of CNT's growth.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.369-375
• /
• 1987

The effects of dopant Al2O3 and surface roughness on the photoelectrochemical conversion of TiO2 ceramic electrodes were investigated. The photocurrent increased with increasing the amount of dopant Al2O3 up to 0.1wt% and 0.05wt% in the specimens reduced at 700$^{\circ}C$ and 800$^{\circ}C$, respectively, and then decreased. However, the photoresponse appeared around 415 nm, which very closely corresponds to the energy band gap of TiO2(∼3.0eV), regardless of reduction temperature and the amount of Al2O3. And the photocurrent increased with increasing surface roughness in the undoped TiO2 ceramic electrode.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.629-635
• /
• 1997

The effects of the annealing atmospheres(O2, N2) and sintering additives that Bi2O3 is a major composition on the microwave dielectric and sintering propertie of (1-x)CaTiO3-xLaAlO3 system were investigated. The annealing atmospheres and the increase of annealing time after sintering did not affect the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) of (1-x)CaTiO3-xLaAlO3 system. However, the Q.f0 values of (1-x)CaTiO3-xLaAlO3 were very sensitive to annealing atmospheres. As the annealing time increased under O2 atmosphere the Q.f0 values of (1-x)CaTiO3-xLaAlO3 enhanced untill 10 hrs in 0.3$\leq$x$\leq$0.6 region, but degraded over that time. The increasing rate of Q.f0 value increased wth increasing x. On the other hand, as the annealing time increased under N2 atmosphere the Q.f0 values were constant in x$\leq$0.6 region, increased gradually in x$\geq$0.7 region. When 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% as sintering additives were added to (Ca0.5La0.5) (Ti0.5Al0.5)O3 (x=0.5) the sintering temperature of 1$600^{\circ}C$ was lowered to 140$0^{\circ}C$, and the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) were not nearly changed. The addition of 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% to (Ca0.5La0.5)(Ti0.5Al0.5)O3 made the Q.f0 values to be lower about 15% and 34%, respectively.