• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.79-82
• /
• 2003

This paper describes a new low-swing inverter for low power consumption. To reduce a power consumption, an output voltage swing is in the range from 0 to $V_{ref}-V_{TH}$, where $V_{ref}=V_{DD}-nV_{TH}$. This can be done by the inverter structure that allow a full swing or a swing on its input terminal without leakage current. Using this low-swing voltage technology, we propose a low-power $4\times4$ bit parallel multiplier. The proposed circuits are simulated with HSPICE under $0.35{\mu}m$ CMOS standard technology. Compare to the previous works, this circuit can reduce the power consumption rate of 11.2% and the power-delay product of 10.3%.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.644-654
• /
• 2001

In this paper, an electronic control unit of the automobile engine for optimal fuel injection an spark timing control has been designed and developed. This system includes hardware and software for a precise control of fuel injection and ignition timing. Especially, the crank angle sensor provides two separate signals: One is the position signal (POS) which indicates 180 degree pulses per revolution, and the other is the reference signal (REF) that represents each cylinder individually. Consequently, the developed engine control system has been able to control fuel injection and ignition timing more quickly and accurately. Through the experiment, it has been found that the fuel injection duration and the position of MBT have been influenced by coolant temperature, air flow rate and engine speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1410-1413
• /
• 2004

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. For the finite element modeling of sheet mental forming the accurate tool model is required. Due to the geometrical complexity of real-size part stamping tools it is hard to make FE model for real-size auto-body stamping parts. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planning alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.829-832
• /
• 2005

This paper describes a wide-range dual-loop Delay Locked Loop (DLL) using Voltage Controlled Delay Line (VCDL) based on Transmission Gate(TG) inverters. One loop is used when the minimum VCDL delay is greater than a half of $T_{REF}$, the reference clock period. The other loop is initiated when the minimum delay is less than $0.5{\times}T_{REF}$. The proposed VCDL improves the dynamic operation range of a DLL. The DLL with a VCDL of 10 TG inverters provides a lock range from 70MHz to 700MHz when designed using $0.18{\mu}m$ CMOS technology with 1.8 supply voltage. The DLL consumes 11.5mW for locking operation with a 700MHz reference clock. The proposed DLL can be used for high-speed memory devices and processors, communication systems, high-performance display interfaces, etc.

• 한국건축시공학회지
• /
• 제23권5호
• /
• pp.547-558
• /
• 2023

초고강도 콘크리트의 강도와 유동성 확보를 위해 실리카흄(SF)를 사용하는 전통적인 방식에서 벗어나 산화 그래핀 나노플레이트릿(Oxidized graphene nanoplatelet, GO)와 유공유리분말( Hollow glass powder, HGP)를 사용한 초고강도 콘크리트를 개발하였고 본 연구에서는 자기수축 특성에 대해 검토하였다. 그 결과 SF를 사용한 Ref 배합보다 SF를 사용하지 않고 cGO(C사의 GO)와 HGP를 사용한 NewMix 배합의 자기수축이 13% 정도 감소하였다. NewMix의 자기수축에 의한 균열발생은 Ref 보다 1일 정도 지연되었고 균열발생 시의 인장응력은 가장 높았다. cGO의 높은 비표면적과 우수한 분산성으로 콘크리트 내의 공극들이 충전 되어 자기수축이 감소하고 cGO에 의한 균열저항 성능이 증가하여 초고강도 콘크리트의 자기수축 균열 제어에 효과가 있을 것으로 판단된다.

• 한국농공학회지
• /
• 제15권1호
• /
• pp.2853-2877
• /
• 1973

Models of cross-sections and channels were made in order to measure seepage losses. Cross-sections were made of sand, sandy clay loam and loam, their thicknesses being 30cm and 40cm, respectively. Flow depths kept in the cross-sections were 4cm, 6cm, 8cm and 10cm. Straight and curved channel models were provided so as to measure seepage losses, when constant water depths maintained at the heads of the channels were 7.3cm and 5.7cm, respectively. The results obtained in this experiment are presented as follows: 1) A cumulative seepage loss per unit length at a point in the channel varies in accordance with time and flow depth. The general equation of cumulative seepage loss may be as follows(Ref. to Table V.25): $$q_{cum}=\int_{o}^aq(a)dt+\int_a^bq(b)dt+\int_b^tq(c)dt$$ 2) In case that the variation of water depth through the channel is slight, the total seepage loss may be computed by applying the following general equation: $$\={q}_{cum}{\cdot}x=\int_o^tq_{cum}\frac{{\partial}x}{{\partial}t}dt$$ 3) Because seepage loss varies considerably according to water depth in case that the variation of flow depth through the channel is great, seepage loss should be computed by taking account of the change of flow depth. 4) The relation between time and traveling distance of water flow may be presented as the following general equation(Ref. to Table V.29): $$x=pt^r$$ 5) The ratios of the seepage losses of the straight channel to the curved channel are 1:1.03 for a flow depth of 7.3cm and 1:1.068 for that of 5.7cm. 6) The ratios of the seepage losses occurring through the bottom to those through the inclined plane in the channel cross-section are 1:2.24 for a water depth of 8cm and 1:2.47 for a depth of 10cm in case that soil-layer is 30cm in thickness. Similarly, those ratios are 1:2.62 and 1:2.93 in case of a soil-layer thickness of 40cm(Ref. to Table V.5).

• Animal Bioscience
• /
• 제36권9호
• /
• pp.1445-1452
• /
• 2023

Objective: This study was performed to evaluate the quality characteristics of pork sausage (PS) with sea tangle extract (STE) and rapid chilled pre-rigor muscle (RCPM) for the development of reduced-salt low-fat sausage. Methods: Pre- and post-rigor pork ham muscles were prepared to process PSs. Positive control (reference, REF) using post-rigor muscle were manufactured at a regular-salt level of 1.5%. Fresh and rapid-chilled pre-rigor muscle (FPM and RCPM) were used to manufacture reduced-salt sausages with 0.8% salt. Reduced-salt PSs were prepared with four treatments: FT1 (FPM alone), FT2 (FPM with 5% STE), RT1 (RCPM alone), and RT2 (RCPM with 5% STE). The physicochemical and textural properties of the sausages with reduced-salt levels and RCPM combination were measured to determine if the characteristics of RCPM were similar to those with FPM. Results: The pH values of PS with FPM and RCPM were higher than those of REF with post-rigor muscle. Color values (L^*, a^*, b^*) were not affected by different rigor-states and salt addition level. Textural properties of reduced-salt PSs were similar to those of REF due to the improved functionalities of pre-rigor muscle. RT2 had lower expressible moisture (%) than other treatments with post-rigor muscle and RCPM except for RT1. Conclusion: The addition of STE and RCPM to reduced-salt PS increased the water-holding capacity, which was lower than those of PS with STE using RCPM but similar to those of regular-salt sausage.

• Animal Bioscience
• /
• 제36권11호
• /
• pp.1738-1746
• /
• 2023

Objective: The aim of this study was to investigate quality characteristics of reduced-salt, low-fat pork sausage (PS) using pre-rigor muscle and sea tangle extract (STE) to reduce salt level of sausages during refrigerated storage. Methods: Pork ham was prepared with pre-rigor and post-rigor muscle from the local market. Sausages using post-rigor muscle were manufactured with the 1.5% of salt content, and samples with pre-rigor muscle were processed by different salt concentrations (0.8%). Accordingly, PSs were prepared in 4 treatments (REF, PS with 1.5% of salt using post-rigor muscle; CTL, PS with 0.8% of salt using pre-rigor muscle; TRT1, PS with 0.8% of salt and 5% of STE using pre-rigor muscle; TRT2, PS with 0.8% of salt and 10% of STE using pre-rigor muscle). For the evaluation of quality characteristics and shelf-life of reduced-salt PS, pH and color values, cooking loss (%), expressible moisture (%), textural properties, lipid oxidation (thiobarbituric reactive substances), protein denaturation (volatile basic nitrogen), and microbiological analysis (total plate counts and Enterobacteriaceae counts) were determined. Results: The pH and temperature of pre-rigor raw pork ham were higher than those of post-rigor pork ham. Hardness of TRT2 was higher than that of REF or CTL. TRT2 had higher gumminess and chewiness than CTL. TRT1 and TRT2 had lower volatile basic nitrogen than CTL. Total plate counts of TRT2 were lower than those of CTL. Expressible moisture values of TRT1 and TRT2 were similar to those of REF. The addition of STE into PS improved functional properties and shelf-life of PS. Conclusion: Reduced-salt PS containing pre-rigor muscle and STE had similar functional properties to those of regular-salt ones, while containing approximately 47% less salt compared to regular-salt level.

• 대한전자공학회논문지SD
• /
• 제38권8호
• /
• pp.54-61
• /
• 2001

High-bandwidth DRAM을 위해 1Gb/s의 데이터 전송률까지 동작하고 그 출력 전압 스윙이 온도와 전원 전압(VDD) 변동에 무관한 CMOS open-drain 출력 구조 회로를 설계하였다. 출력 구동 회로는 여섯 개의 binary-weighted NMOS 트랜지스터로 구성되는데, 이 여섯 개 중에서 ON시킬 current control register의 내용은 추가 호로 없이 DRAM 칩에 존재하는 auto refresh 신호를 이용하여 새롭게 수정하였다. Auto refresh 시간 구간동안 current control register를 수정하는데, 이 시간 구간동안 부궤환 (negative feedback) 동작에 의해 low level 출력 전압($V_OL$)이 저전압 밴드갭 기준전압 발생기(bandgap reference voltage generator)에 의해서 만들어진 기준전압($V_{OL.ref}$)과도 같도록 유지된다. 테스트 칩은 1Gb/s의 데이터 전송률까지 성공적으로 동작하였다. 온도 $20^{\circ}C$~$90^{\circ}C$, 전원 전압 2.25V~2.75V영역에서 최악의 경우 제안된 출력 구동 회로의 $V_{OL.ref}$와 $V_OL$의 변동은 각각 2.5%와 725%로 측정된 반면, 기존의 출력 구동 회로의 $V_OL$의 변동은 같은 온도의 전원 접압의 영역에 대해 24%로 측정되었다.

• 대한전자공학회논문지SD
• /
• 제44권12호
• /
• pp.25-30
• /
• 2007

본 논문에서는 Gb/s 동작과 같은 고속 동작에 적합한 새로운 버스트 모드 광 송신기 구조를 제시하였다. 이 구조로써 디지털적으로 제어되는 APC 회로를 포함하는 EPON용 버스트-모드 광 송신기를 상용 0.8m BiCMOS 기술을 이용하여 제작하였다. 제작된 광 송신기는 1.25Gb/s에서 잘 동작했고 53.3ps의 지터, 191ps기 상승시간 및 258ps의 하강시간을 갖는 양호한 아이패턴을 보였다. APC 기능의 특성을 파악하기 위해 외부 전압 $V_{REF}$를 증가시키며 출력광의 전력을 측정했다. 광 전력은 0.293mW/V의 비율로 $V_{REF}$에 선형적으로 비례하였다.