• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.289-290
• /
• 2006

[ $SrTiO_3$ ] is usually added as shifters in order to move the $T_C$ of $BaTiO_3$ to lower temperatures because it is well established that the $T_C$ of $BaTiO_3$ decreases linearly with a solid solution of $Sr^{+2}$ in place of $Ba^{+2}$. It is not fully understood yet, however, how $SrTiO_3$ influences on the peak value of the dielectric constant $(\varepsilon_{max})$ at the $T_C$ of $BaTiO_3$. This research reports the effect of $SrTiO_3$ addition on εmax at the $T_C$ of $BaTiO_3$ ceramics. Based on the chemical composition and the grain size dependence of the dielectric property of $BaTiO_3$ ceramics, functionally graded $(Ba,Sr)TiO_3$ composites were designed and fabricated. Multi-layered $(Ba,Sr)TiO_3$ composites with a compositional gradient of $SrTiO_3$ exhibited a low temperature coefficient and high dielectric constant in a wide temperature range.

• Applied Science and Convergence Technology
• /
• 제26권5호
• /
• pp.143-147
• /
• 2017

Structural studies on the addition characteristics of Nb ions to $BaTiO_3$ solid solutions were performed by XRD and SEM/EDS technique. The X-ray diffraction peaks of the (111), (200) and (002) planes of Nb-doped $BaTiO_3$ solid solutions with different mole% of Nb were analyzed. We also investigated the relationship between the dielectric and structural properties of Nb-doped $BaTiO_3$. The transition temperatures of $BaTiO_3$ solid solution doped with 0.5mole%Nb and 1.0 mole%Nb were ${\sim}116^{\circ}C$ and ${\sim}87^{\circ}C$, respectively, which were found to be shifted to very low temperature from the transition temperature of pure $BaTiO_3$ (about $125^{\circ}C$). As a result of analysis of 1/K versus T and ln[$(1/K)-(1/K_m)$ versus ($T-T_m$)] of the two compositions used in this experiment, the diffusivity slightly differs from that of pure $BaTiO_3$ at temperatures above Curie temperature. And this characteristic was analyzed by applying the modified Curie-Weiss law.

• 한국표면공학회지
• /
• 제56권6호
• /
• pp.380-385
• /
• 2023

In this study, an MPB PMNT system containing 0.05 to 0.10 wt.% BaTiO₃ was synthesized using a traditional chemical method and its pyroelectricity was investigated. Pyroelectricity, dielectricity, and ferroelectricity of the synthesized BaTiO₃-PMNT system were analyzed by heat treatment at 1240~1280 ℃ for 4 hours to evaluate its applicability as a pyroelectric sensor. Unlike the simple ABO₃ ferroelectric, the BaTiO₃-doped PMNT system exhibited phase transition characteristics over a wide temperature range typical of complex perovskite structures. Although no dramatic change could be confirmed depending on the amount of BaTiO₃ added, stable pyroelectricity was maintained near room temperature and over a wide temperature range. When the amount of BaTiO₃ added increased from 0.05BaTiO₃-PMNT to 0.10BaTiO₃-PMNT, the electric field slightly increased from 5.00×10³ kV/m to 6.75×10³ kV/m, and the maximum value of remanent polarization slightly increased from 0.223 C/m² to 0.234 C/m². The pyroelectric coefficients of 0.05BaTiO₃-PMNT and 0.10BaTiO₃- PMNT at room temperature were measured to be ~0.0084 C/m²K and ~0.0043 C/m²K, respectively. The relaxor ferroelectric properties of the BaTiO₃-PMNT system were confirmed by analyzing the plot of K_max/K versus (T-T_max)^γ. The BaTiO₃-doped MPB PMNT system showed a distinct pyroelectric performance index at room temperature, and the values were F_v ~ 0.0362 m²/C, F_d ~ 0.575×10^-4 Pa^-1/2.

• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.136-144
• /
• 1999

텅스템브론즈형 고주파 유전체의 $BaORe_2O_3TiO_2$(BLT)와 $BaO(Nd({0.77}Y_{0.23})_2O_34TiO_2(B(NY)T)$의 결정구조를 Rietveld 정밀화법으로 분석하였다. 양이온은 X-선 데이터로부터, 산소이온은 중성자 데이터로부터 정밀화한 'combined법'에 의해 가장 신뢰성이 높은 결정구조분석 결과를 얻었다. Mateeva 등이 처음 제시한 결정구조의 결정학적 모순점을 해결하였다. BaORe2O34TiO2(Re=La, Nd, Y) 유전체는 $3\times2$개의 페롭스카이트 블록과 이 블록사이에 형성된 4개의 pentagon-channel로 이뤄진다. Ti-O6팔면체는 tilted 및 변형된 구조를 갖고 있고, 이에 의해 같은 z-층에 있는 Ba 및 Re 이온의 변위되어 초격자(c$\approx$ 7.6$\AA$)를 형성된다. Re 이온반경이 작은 B(NY)T의 Ti-O6 팔면체가 tilting 및 변형이 큰 것으로 나타났다. 유전상수 $\varepsilon_{\gamma}$과 온도계수 $au_\varepsilon$은 BLT의 경우 각각 $109.5, -180 ppm/^{\circ}C$였고, B(NY)T 경우 $76, +40ppm/^{\circ}C$이었다. Re 이온 크기가 작은 시료의 $\tau$$\varepsilon$이 +값을 나타내었다. 복합 페롭스카이트에서 관찰되는 $\tau_\varepsilon$과 팔면체 tilting과의 관계를 본 텅스텐 브론즈 구조재료에서 고찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.224-225
• /
• 2006

$BaTiO_3$ powder를 epoxy/solvent에 혼합한 슬러리와 solvent에 혼합한 슬러리의 분산 특성을 평가하기 위하여 분산제인 silane을 $BaTiO_3$ powder 표면에 코팅한 powder를 이용하여 분산실험을 진행하였다. Silane 표면 코팅 량에 따른 $BaTiO_3$ 슬러리와 $BaTiO_3$/epoxy 복합 슬러리의 분산 특성은 서로 다른 경향으로 나타남을 확인하였으며, silanae 최적 첨가량은 $BaTiO_3$/solvent 슬러리의 경우 0.3~0.5 wt%, $BaTiO_3$/epoxy/solvent 슬러리의 경우 1wt% 이상 첨가한 조건이었다. 또한 분산성 측정의 방법으로 점도 측정 방법과 함께 표면 거칠기 측정 방법의 가능성을 확인하였다.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.447-457
• /
• 2023

Single-atom Pd clusters anchored on t-BaTiO₃ material was synthesized using hydrothermal and ultrasonic methods for the effective piezoelectric catalytic degradation of pollutants using vibration energy. XRD patterns of BaTiO₃ loaded with monoatomic Pd were obtained before and after calcining, and showed typical cubic-phase BTO. TEM and HAADF-STEM images indicated single-atom Pd clusters were successfully introduced into the BaTiO₃. The piezoelectric current density of the prepared Pd-BaTiO₃ binary composite was significantly higher than that of the pristine BaTiO₃. Under mechanical vibration, the nanomaterial exhibited a tetracycline decomposition rate of ~95 % within 7 h, which is much higher than the degradation rate of 56.7 % observed with pure BaTiO₃. Many of the piezo-induced electrons escaped to the Pd-doped BaTiO₃ interface because of Pd's excellent conductivity. Single-atom Pd clusters help promote the separation of the piezo-induced electrons, thereby achieving synergistic catalysis. This work demonstrates the feasibility of combining ultrasonic technology with the piezoelectric effect and provides a promising strategy for the development of ultrasonic and piezoelectric materials.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.346-352
• /
• 2003

BaTiO$_3$, powders were prepared by sol-gel process from different aging time and reaction temperature. Particle shape, size and crystal structure of prepared $BaTiO_3$ powders were analyzed by SEM, XRD and FT-IR. Effect of aging time alternation didn't particularly show up. Spherical nano-sized $BaTiO_3$ powders were obtained from condition more than reaction temperature $55^{\circ}C$, and obtained sintered $BaTiO_3$ powders of tetragonal phase from heat-treatment at $1,100^{\circ}C$.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.674-681
• /
• 1997

Ternary compound ceramics, (1-y-x) BaTiO$_3$-y SrTiO$_3$-x MgTiO$_3$(0.00 x 0.20), were fabricated by the conventional ceramic process. The structural and dielectric properties of specimens were investigated while varying the composition and sintering temperature(1,200~1,45$0^{\circ}C$) in order to obtain the optimum condition of capacitor. As is well known, Curie temperature(T$_{c}$) of high dielectric-based ceramic(BaTiO$_3$) was shifted and temperature of capacitance was decreased in according to increase of solid solution with (Sr, Mg)TiO$_3$. As a result, a suitable condition of compound rate for capacitor was obtained such as the BSM-11(0.8BaTiO$_3$-0.1SrTiO$_3$-0.1MgTiO$_3$), and sintering temperature was sintered at 1,25$0^{\circ}C$ for two hours. In this case, dielectric constant<1,300, dielectric loss(tan$\delta$)<0.03, and the variation rate of capacitance had less than 3% in the range -10~7$0^{\circ}C$.>.

• Journal of Magnetics
• /
• 제14권3호
• /
• pp.120-123
• /
• 2009

In this study, BiFe$O_3$-BaTi$O_3$ ceramics have been fabricated by a solid-state reaction method. The effects of BaTi$O_3$ content in the (1-x)BiFe$O_3$-xBaTi$O_3$ (x = 0.1, 0.2, 0.25, 0.3, 0.4, 0.5) system on crystal structure and magnetic, dielectric, and ferroelectric properties were investigated. Perovskite BiFe$O_3$ was stabilized through the formation of a solid solution with BaTi$O_3$. Rhombohedrally distorted structure (1-x)BiFe$O_3$-xBaTi$O_3$ ceramics showed strong ferromagnetism at x = 0.5. Dielectric and ferroelectric properties of the BiFe$O_3$-BaTi$O_3$ system also changed significantly upon addition of BaTi$O_3$. It was found that the maximum dielectric and ferroelectric properties were exhibited in the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25. This suggested the morphotropic phase boundary (MPB) with the coexistence of both rhombohedral and cubic phases of the (1-x)BiFe$O_3$-xBaTi$O_3$ system at x = 0.25.

• 한국결정성장학회지
• /
• 제10권6호
• /
• pp.378-380
• /
• 2000

The epitaxial $BaTiO_{3}$ thin film was prepared on the MgO substrate by the coating-pyrolysis process using a mixed solution of Ba-naphthenate and Ti-naphthenate. The crystal structure of the epitaxial $BaTiO_{3}$ thin film was characterized by XRD ${\theta}/2{\theta}$ scan and asymmetric {303} rocking curve scan. The epitaxial $BaTiO_{3}$ thin film had the cubic phase with the lattice parameter of a = c = 0.4018 nm.