• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.8-13
• /
• 2023

Biodegradation of antibiotics in soil can be affected by various environmental factors. This study was set to investigate the effect of environmental conditions such as soil pH and temperature on the degradation of oxolinic acid (OA), one of the agricultural antibiotics used in South Korea, in soil. Rice paddy soil (RS) and field soil (FS) were contaminated with OA and the soil pH was adjusted to 5.7±0.2, 6.8±0.2, and 7.6±0.1. The soil samples were kept at different temperatures (2.3±0.2, 23.0±0.6, 30.5± 0.3℃) for 30 d. The changes in the OA concentrations were determined at selected times. With the RS and FS, the OA removal was not affected by the soil pH used in this study; however, at pH 7.6, the OA removal in the RS was greater than that in the FS, which can be attributed to the different soil properties. The OA removal was similar at 23.0 and 30.5℃ in both soils, but was lower at 2.3℃. The information on the effect of different environmental conditions on the degradation of antibiotics in soil is very limited. Therefore, further studies are needed to better manage the residual antibiotics in the agricultural environment.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.11-24
• /
• 2018

The purpose of slope stability analysis is to predict the location and occurrence time considering the rainfall, topographic and soil characteristics, etc. In this study, infinite slope stability analysis considering the time distribution characteristics of the daily maximum rainfall was conducted using a model that combines a digital terrain model and a groundwater flow model. As the results of slope stability analysis, 69.1~70.0% of Fs < 1 cells are in the range of slope angle $20{\sim}50^{\circ}$ and Fs < 1 starts to appear in 2 hours for $Q_1$ model, 5 hours for $Q_2$, 7 hours for $Q_3$ and 6 hours for $Q_4$. Furthermore, the maximum number of Fs < 1 cells appear in 6 hours for $Q_1$ model, 12 hours for $Q_2$, 16 hours for $Q_3$ and 20 hours for $Q_4$, and the area of Fs < 1 is 14.3% for $Q_1$ model, 15.0% for $Q_2$, 15.6% for $Q_3$, and 16.3% for $Q_4$.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.13-24
• /
• 1996

The following results were obtained by analyzing the displacement, strain and stability of ground at the soft ground excavation using sheet pile. 1. Before setting the strut, the horizontal displacement was large on the upper part of excavated side, but after setting the strut, it showed concentrated phenomenon while being moved to go down to the excavated side. 2. After setting the strut, the displacement of sheet pile was rapidly decreased about a half compared with before setting the strut. The limitation of excavation depth was shown approximately GL-8m after setting double stair strut. 3. Maximum shear strain was gradually increased with depth of excavation, and local failure possibility due to shear deformation at the bottom of excavation was decreased by reinforcement of strut. 4. Maximum horizontal displacement of sheet pile at GL-7.5m was shown 0.2% of excavation depth in elasto-plastic method, and 0.6% in finite-element methods, and the maximum displacement was occurred around the bottom of excavation. 5. To secure the safety factor about penetration depth in the ground of modeling, D/H should be more than 0.89 in the case of one stair strut, and more than 0.77 in the case of double stair strut. 6. The relation of safety factor and D/H about the penetration depth was appeared, Fs=0.736(D/H) + 0.54 in the case of one stair strut, and Fs=0.750(D/H) + 0.62 in the case of double stair strut.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.60-67
• /
• 1999

The CLSM and the image analysis technique enhanced observation of fiber wall fibrillation occurred in both the outer and the fiber wall surfaces during refining by non-destructive techniques. In the early stages of refining, it was well observed that a partial separation between the S1 and S2 layer in the secondary wall was made generating a space in the wet fiber walls . With further refining, it was clearly shown that the shear forces imparted by the refiner bar surfaces caused the S1 layer to become totally separated from the S2 layer as well as creating microfibrils. Furthermore, the fibrillation in the inner fiber wall surfaces could be due to the normal force (Fn) by refiner bars, friction force between a fiber and refiner bars (Fs) and inner friction force between fiber walls(fs). It was confirmed that the concept of fibrillation should be extended to fibrillation in the inner fiber wall surfaces as well as internal and external fribrillation.

• Electrical & Electronic Materials
• /
• v.10 no.10
• /
• pp.1022-1028
• /
• 1997

In this paper we present the construction details and output characteristics of a diaphragm-type pressure sensor with Cu-Ni(53:47) thin-film strain gauges. In order to improve the sensitivity and the temperature compensation two circumferential gauges are placed near the center of the diaphragm and two radial gauges are located near the edge. For all the gauges the relative change in resistance ΔR/R with pressure is of the order 10$^{-3}$ for the maximum pressure. The output is found to be linear over the entire pressure range(0-30kfg/cm$^2$)and the output sensitivity obtained is 1.6mV/V. The maximum nonlinearity observed in output characteristics is 0.35%FS for 5V excitation and the hysteresis is less than 0.1%FS.

• Economic and Environmental Geology
• /
• v.23 no.2
• /
• pp.183-199
• /
• 1990

Ore deposits of Dongwon mine are composed of numerous gold and silver veins emplaced in sedimentary rocks of Cambrian Choseon Supergroup and granitoids of Cretaceous age. Ore veins of the mine can be divided into gold and silver veins on the base of vein structure, mineral assemblage and vein trends. Mutual relationships between gold and silver veins are uncertain. Gold veins are simple veins which are composed of base-metal sulfides, and electrum with quartz and ankerite. On the other hand, silver veins are complex veins which reveal three distinct stages of mineral deposition based on vein structure; stage I, deposition of small amounts of oxides and pyrite with quartz; stage II, deposition of base-metal sulfides, small amounts of Ag-bearing minerals, calcite and quartz; stage III, deposition of base metal sulfides, electrum, Ag-sulfosalts, native silver, carbonates and quartz. Homogenization temperature and salinity of fluid inclusion from quartz of gold vein are as follows; $229^{\circ}$ to $283^{\circ}C$, 4.7 to 6.4 wt.% equivalent NaCI. The ore mineralogy suggests that temperature(T) and sulfur fugacity($fs_2$) of the formation of the gold vein and stage III of silver vein are estimated as T ; $294^{\circ}$ to $318^{\circ}C$, $fs_2\;10^{-9.4}$ to $10^{-10.1}$ atm. and T; $240^{\circ}$ to $279^{\circ}C$, $fs_2;10^{-11.1}$ to $10^{-17.3}$ atm. respectively. Pressure condition during gold vein formation estimated from data of ore mineralogy and fluid inclusion range 500 to 750 bar.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.19-27
• /
• 2003

Coliforms is currently being used as the standard of environmental water qualify to evaluate the level of source water quality especially condition of fecal contamination. However, not properly applied to water quality management. So in this study, in addition to Coliforms, fecal contamination indicator bacteria turk at Feral Coliforms(FC), E. coli, Fecal streptococci(FS), Clostridium and environmental parameters related with it's distribution were investigated on a monthly basis in 6 water intakes of Han River. The mean of BOD, DO, SS and pH, benchmarks of source water management were maintained the second grade of environmental water quality standard applied to Han River but Coliforms exceeded it. Distribution of Coliforms ranged from 1.0×10¹ to 2.7 10/sup 5/ CFU/ml, FC ranged from ND to 5.3×10¹ CFU/ml, E. coli ranged from ND to 9.2×10¹ CFU/ml, FS ranged from ND to 2.5×10¹CFU/ml, they were steepy rise on July and August in common when rainfalls was heavy and water temperature was high, but Clostridium perfringens ranged from 1.7×10¹to 1.7×10¹CFU/ml not fluctuate by month. Statistical analysis of sampling data showed that most significant correlations occurred among FC and Coliforms(r = 0.840), E. coli(r = 0.792), FS(r = 0.687) and environmental parameters(temperature, turbidity, SS, rotor were all r > 0.60) while no significant correlation was observed between ammonia generally recognized fecal contamination indicator and bacteria. Identification of the coliforms showed that Enterobacter, Klebsiella, Citrobacter were comprised of 32%, 24%, 16% respectively, and E. coli were 7% of it. while E. coli was made up 85.9% of FC. The mean value of FC/Coliforms ratio, 5.2(0.1-42) were higher in Amsa, Guui than Jayang. Fecal coliforms, as those are able to reflect more particularly the extent of the fecal contamination, were considered useful in deciding the level of water treatment while monitoring the fecal contamination from the source of water supply. Therefore, it is expected that the water quality is going to be managed more efficiently by using fecal coliforms supplementarily to total coliforms which are current standard item of water-quality environment.

• Journal of Technologic Dentistry
• /
• v.39 no.2
• /
• pp.83-91
• /
• 2017

Purpose: The objective of this study was to evaluate influence of mechanical properties of gingival shade composite resins(GSCRs) according to thermocycling treatment. Methods: The material utilized in this study was Crea.lign(CGR), Twiny flow(TGF) and Twiny(TGP). Total sixty specimens were fabricated with a dimension of $25{\times}2{\times}2mm$ according to the ISO 4049. After fabrications, specimens of before and after thermocycling(to $55^{\circ}C$ from $5^{\circ}C$) were stored in the distilled water for 24 hours at the $37^{\circ}C$. Three-point flexural test was performed in universal testing machine(Instron 5966, USA) at a crosshead speed of 1 mm/min. Flexural strength, flexural modulus and work of fracture according to the thermocycling were analyzed using a one-way ANOVA analysis. Surface analysis of GSCRs after thermocycling evaluated using the scanning electron microscope. Results: : The highest FS was measured in TGP group of NTC group and lowest in CGR group after TC. After TC, FS and FM decreased in CGR and TGP groups, but TGF increased. There was a statistically significant difference between FS and WOF in GSCRs(p<0.05). But FM did not show any significant difference after TC (p>0.05). The strength of the characteristic exceeded the flexural strength required by ISO 4049(> 80 MPa). Weibull modulus(m) showed the highest reliability in the TGP group (m = 14.22), and the reliability of the TGF and TGP groups after TC decreased. Conclusion: Thermocycling treatment is important factor influence of mechanical properties with gingival shade composite resins. Therefore, we recommended that mechanical properties need to get useful information and accuracy for life-span expectancy according to the thermocycling treatment.

• Journal of Korea Multimedia Society
• /
• v.8 no.8
• /
• pp.1080-1087
• /
• 2005

Significant computations for full search (FS) motion estimation have been a big obstacle in real-time video coding and recent MPEG-4 AVC (advanced video coding) standard requires much more computations than conventional MPEG-2 for motion estimation. To reduce an amount of computation of full search (FS) algorithm for fast motion estimation, we propose a new and fast matching algorithm without any degradation of predicted images like the conventional FS. The computational reduction without any degradation in predicted image comes from fast elimination of impossible candidate motion vectors. We obtain faster elimination of inappropriate motion vectors using efficient matching units from localization of complex area in image data and dithering order based matching scan. Our algorithm reduces about $30\%$ of computations for block matching error compared with the conventional partial distortion elimination (PDE) algorithm, and our algorithm will be useful in real-time video coding applications using MPEG-4 AVC or MPEG-2.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.4
• /
• pp.552-561
• /
• 2021

Objective : To compare the anterior cervical discectomy and fusion (ACDF) and posterior cervical fusion (PCF) with wide facetectomy in the treatment of parallel-shaped bony foraminal stenosis (FS). Methods : Thirty-six patients underwent surgery due to one-or-two levels of parallel-shaped cervical FS. ACDF was performed in 16 patients, and PCF using CPS was performed in 20 patients. All patients were followed up at 1, 3, 6, and 12 months postoperatively. Standardized outcome measures such as Numeric rating scale (NRS) score for arm/neck pain and Neck disability index (NDI) were evaluated. Cervical radiographs were used to compare the C2-7 Cobb's angle, segmental angle, and fusion rates. Results : There was an improvement in NRS scores after both approaches for radicular arm pain (mean change -6.78 vs. -8.14, p=0.012), neck pain (mean change -1.67 vs. -4.36, p=0.038), and NDI score (-19.69 vs. -18.15, p=0.794). The segmental angle improvement was greater in the ACDF group than in the posterior group (9.4°±2.7° vs. 3.3°±5.1°, p=0.004). However, there was no significant difference in C2-7 Cobb angle between groups (16.2°±7.9° vs. 14.8°±8.5°, p=0.142). As a complication, dysphagia was observed in one case of the ACDF group. Conclusion : In the treatment of parallel-shaped bony FS up to two surgical levels, segmental angle improvement was more favorable in patients who underwent ACDF. However, PCF with wide facetectomy using CPS should be considered as an alternative treatment option in cases where the anterior approach is burdensome.