• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.425-431
• /
• 2005

The efficiency of complex slurry preparation route for developing the high performance SiC matrix of $RS-SiC_{f}/SiC$ composites has been investigated. The green bodies for RS-SiC materials prior to the infiltration of molten silicon were prepared with various C/SiC complex slurries, which associated with both the sizes of starting SiC particles and the blending conditions of starting SiC and C particles. The characterization of Rs-SiC materials was examined by means of SEM, EDS and three point bending test. Based on the mechanical property-microstructure correlation, the process optimization is also discussed. The flexural strength of Rs-SiC materials greatly depended on the content of residual Si. The decrease of starting SiC particle size in the C/SiC complex slurry was effective for improving the flexural strength of RS-SiC materials.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.141-145
• /
• 2009

A C-to-SystemC synthesizer which processes the input behavior according to high-level synthesis, and then transforms the synthesis result into SystemC module code is implemented in this paper. In the synthesis process, the input behavioral description in C source code is scheduled using list scheduling algorithm and register allocation is performed using left-edge algorithm on the result of scheduling. In the SystemC process, the output from high-level synthesis process is transformed into SystemC module code by combining it with SystemC features such as channels and ports. The operation of the implemented C-to-SystemC synthesizer is validated through simulating the synthesis of elliptic wave filter in SystemC code. C-to-SystemC synthesizer can be used as a part of tool-chain which helps to implement SystemC design methodology covering from modeling to synthesis.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.166-171
• /
• 2007

The characterization of monolithic SiC and SiCf/SiC composite materials fabricated by NITE and RS processes was investigated in conjunction with the detailed analysis of their microstructure and density. The NITE-SiC based materials were fabricated, using a SiC powder with average size of 30 nm. RS- SiCf/SiC composites were fabricated with a complex slurry of C and SiC powder. In the RS process, the average size of starting SiC particle and the blending ratio of C/SiC powder were $0.4\;{\mu}m$ and 0.4, respectively. The reinforcing materials for /SiC composites were BN-SiC coated Hi-Nicalon SiC fiber, unidirectional or plain woven Tyranno SA SiC fiber. The characterization of all materials was examined by the means of SEM, EDS and three point bending test. The density of NITE-SiCf/SiC composite increased with increasing the pressure holding time. RS-SiCf/SiC composites represented a great decrease of flexural strength at the temperature of $1000\;^{\circ}C.$

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.168-177
• /
• 2006

Thirty-nine strains of Colletotrichum gloeosporioides and 5 strains of C. acutatum stored in Korean Agricultural Culture Collection(KACC) were re-identified based on molecular characteristics of ribosomal internal transcribed spacer(ITS) and partial $\beta$-tubulin gene and cultural characteristics on potato dextrose agar(PDA) and Benomyl-added PDA. As the results, 19 strains were identified as C. acutatum with 13 strains of group A2, 5 strains of group A3, and 1 strain of group A4. In addition, 20 strains were identified as C. gloeosporioides with 18 strains of ribosomal DNA group(RG) 4 and 2 strains of RG6. The rest were identified as C. boninense RG5(2 strains), C. coccodes RG2(2 strains), and C. dematium RG12(1 strain). Out of domestic 31 strains, 12 strains were identified as C. acutatum A2, one strain as C. acutatum A3, 14 strains as C. gloeosporioides RG4, 2 strains as C. gloeosporioides RG6, one strains as C. boninense RG5 and one strain as C. dematium RG12. We also discussed taxonomy of C. gloeosporioides and C. acutatum and composition of C. gloeosporioides/C. acutatum isolates from major crops in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.503-511
• /
• 2017

This study was conducted to evaluate the anti-inflammatory activity and clinical efficacy of a sample (A.C.C. extracts) obtained by distillation extraction of 14 herbal medicines including Phellodendron bark. To confirm this, the amount of nitric oxide (NO) produced by the cells in RAW 264.7 cells stimulated by lipopolysaccharide (LPS) and the changes in the production of inflammatory cytokines such as tumor necrosis factor (TNF)-${\alpha}$, interleukin(IL)-$1{\beta}$ and IL-6 were determined. The results showed that A.C.C. extracts strongly inhibited the production of NO and inflammatory cytokines increased by LPS without cytotoxicity. In addition, A.C.C. extracts showed strong bacterial reduction rates of 99.9% in Pseudomonas aeruginosa, Staphylococcus aureus, MRSA (Methicillin-resistant Staphylococcus aureus), Candida albicans and Streptococcus mutans. These findings indicate that A.C.C. extracts are effective ingredients with a strong antimicrobial effect together with an anti-inflammatory effect. In addition, when A.C.C. extracts were applied to infants and toddlers who were suffering from diaper rash, itching, and perspiration symptoms, symptoms of rash, atopy, rash, itching, and heat rash were improved. After the lapse of time, it was visually confirmed that it was considerably relaxed. These findings confirm that A.C.C. extracts comprise a clinically effective anti-inflammatory and anti-bacterial agent that alleviates symptoms such as diaper rash and fever and may therefore be an effective alternative to inflammatory diseases.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.859-860
• /
• 2006

TiC-$TiB_2$-SiC system was a ternary eutectic, whose eutectic composition was 34TiC-$22TiB_2$-44SiC (mol%). TiC-$TiB_2$-SiC ternary eutectic composite were synthesized by a floating zone method using TiC, $TiB_2$ and SiC powders as starting materials. The TiC-$TiB_2$-SiC eutectic composite showed a lamellar texture. TiC(022), $TiB_2(010)$ and SiC(111) of the eutectic composite were perpendicular to the growth direction. TiC-$TiB_2$-SiC ternary eutectic composite had specific relationship among the crystal planes: TiC[011]//$TiB_2[010]$//SiC[112], TiC(200)//$TiB_2$(001)//SiC(402) and $TiC(1\bar{1}1)$//$TiB_2(101)$//SiC(220).

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.594-609
• /
• 1998

In this dissertation, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the seven indices, $C_p,\;C_{pk},\;C_{pm},\;C^{\ast}_{pm},\;C_{pmk},\;C_s,\;C_{psk}$ in terms of sensitivity to departure of the process median from the target value T=M from the most sensitive one up to the least sensitive are $C_{psk},\;C_{s},\;C_{pmk},\;C^{\ast}_{pm},\;C_{pm},\;C_{pk},\;C_p$. i.e, By the criteria adopted for evaluation of PCI's $C_{psk}$ is the most sensitive to the departure of the process median from target and $C_p$ is least

• Journal of the Korean Ceramic Society
• /
• v.31 no.7
• /
• pp.739-744
• /
• 1994

The B4C-C system was investigated to gain an understanding of the sintering behaviors of B4C. In order to get sintered density of 97% TD, sintering temperature of 225$0^{\circ}C$ was necessary. Since such a high temperature operation is actually difficult on a commercial basis, our objective was to examine the possibility of decreasing the sintering temperature by adding SiC. The addition of SiC in B4C increases the sintering rate about at 210$0^{\circ}C$ and results in a fine microstructure with more than 98% relative density on 55 wt% B4C-40wt% SiC-5 wt% C composition. The probability of liquid phase sintering was investigated, but the evidences of liquid phase formation were not observed with XRD and TEM observation. It was proposed that the addition of SiC and carbon to B4C reduce interface energy during sintering, which results in enhanced grain-boundary diffusion. Thus, the enhanced grain-boundary diffusion and retarded grain growth by SiC improve densification.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1551-1559
• /
• 2004

Java, a platform independent object-oriented programming language, is widely used, however it should be integrated with JNI to use system services or to reuse legacy systems. Though JNI provides the standard APIs which allow Java to be combined with C/$C^{++}$, it is very hard and cumbersome for developers to use JNI APIs. In order to address this problem, we introduce a translator named C2JNI, which converts the embedded C program into a JNI compatible C program. With C2JNI, developers can Integrate Java and C programs without JNI APIs, and it will reduce the complexity caused by JNI APIs.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.517-526
• /
• 1990

The crystal structures of two alditol acetates, D-glucitol hexaacetate and xylitol pentaacetate, have been determined by diffraction methods with Mo-K$\alpha$radiation, using direct methods for phase determinations. The crystal data are: for D-glucitol hexaacetate, P2$_1$, with a = 10.275 (2), b = 8.363 (1), c = 12.560 (5) $\AA;\beta$ = 95.97 $(2)^{\circ}$, Z = 2; for xylitol pentaacetate, P2$_1$/C with a = 18.126 (1), b = 11.422 (2), c = 8.649 (1) $\AA$, $\beta = 95.03 (1)^{\circ}$, Z = 4. Both molecules have extended zigzag carbon chain conformations which differ from previous studies of the structures of D-glucitol and xylitol and also differ from NMR studies on alditol acetates. The bond lengths and angles are normal, with mean values over both structures of C($sp^3)-C(sp^3): 1.514 (10),\; C(sp^3)-O: 1.444 (6),\; C(sp^2)-O: 1.347 (9),\; C(sp^2)=O: 1.197 (6),\; C(sp^2)-C(sp^3): 1.479(9){\AA},\; C(sp^3)-C(sp^3)-C(sp^3): 114.6 (17),\; O-C(sp^3)-C(sp^3): 109.4 (23),\; C(sp^2)-O-C(sp^3): 117.4 (6),\; O=C(sp^2)-O: 122.6 (6),\; C(sp^3)-C(sp^2)-O: 111.8 (7),\; C(sp^3)-C(sp^2)=O: 125.5 (4)^{\circ}$. The atoms of acetate groups are in coplanar. There are no particularly short intermolecular contacts and the molecules are held together by van der Waals force only.