• Journal of Korean Dental Science
• /
• v.15 no.1
• /
• pp.51-60
• /
• 2022

Purpose: The aim of this study was to evaluate the bio-durability and bone regeneration capacity of the non-cross-linked collagen membrane in rabbit calvarial defect models. Materials and Methods: Four circular defects with 8 mm diameter were made in each of calvarium of 10 male rabbits. The following groups was randomly assigned to each defect - 1) Control, 2) membrane group containing non-cross-linked collagen membrane only (M), 3) bone graft group (B), 4) bone graft with membrane group (B+M). Animals were sacrificed and samples were harvested at 2 weeks (n=5) and 8 weeks (n=5). Histologic sections were prepared and histomorphometric analysis was performed. Result: Histologic results showed well adaptation of the non-cross-linked membrane on each defect and normal healing response at 2 weeks. At 8 weeks, the membranes were partially biodegraded. Histomorphometrically, B and B+M group showed the significantly greater total augmented area (B+M group, 10.44±1.49, P=0.016; B group, 9.13±0.53, P=0.032) and new bone formation (B+M group, 2.89±0.93, P=0.008; B group, 2.85±1.15, P=0.008) compared to control group. Collapsing of the central portion of the membrane, membrane group showed greater value in new bone formation at 8 weeks (1.78±0.68, P=0.032). Conclusion: Within the limitations of this study, the non-cross-linked collagen membrane fabricated using the improved decellularized method was shown to be effective for the regeneration of calvarial bone defects. In addition, prolonged barrier function might be provided using this collagen membrane.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.272-276
• /
• 2007

P-type thermoelectric material $Si_{0.8}Ge_{0.2}$ was sintered by Hot Press process (HP) and the effect of boron ($0.25{\sim}2$ at%) addition on the thermoelectric properties were reported. To enhance the thermoelectric performances, the $Si_{0.8}Ge_{0.2}$, alloys were fabricated by mechanical alloying (MA) and HP. The carrier of p-type SiGe alloy was controlled by B-doping. The effect of sintering condition and thermoelectric properties were investigated. B-doped SiGe alloys exhibited positive seebeck coefficient. The electrical conductivity and thermal conductivity were increased at the small amount of boron content ($0.25{\sim}0.5$ at%). However, they were decreased over 0.5 at% boron content. As a result, the small addition of boron improved the Z value. The Z value of 0.5 at% B doped $Si_{0.8}Ge_{0.2}$ B alloy was $0.9{\times}10{-4}/K$, the highest value among the prepared alloys.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.244-251
• /
• 2014

This paper describes a prototype mechanical white noise generator has a source level of more than 170.0 dB (re $1{\mu}Pa$ at 1 m) at the frequency range of 10 Hz to 100 kHz. The results of performance evaluation of the generator are as follows. The average source level of the generator measured by a step of $15^{\circ}$ in horizontal (0 to $360^{\circ}$, 25 points) was 185.2 (SD (standard deviation): 2.3) dB (re $1{\mu}Pa$ at 1 m). The maximum and minimum source levels were appeared at the frequency range of 2.5 to 5.0 kHz and around 100 kHz, respectively. The average source levels at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$ and $270^{\circ}$ were 162.9 (SD: 10.6), 168.4 (SD: 10.0), 162.1 (SD: 9.1) and 166.5 (SD: 11.1) dB (re $1{\mu}Pa$ at 1 m). The average source level measured by a step of $30^{\circ}$ in vertical was 184.9 (SD: 2.2) dB (re $1{\mu}Pa$ at 1 m). The relative maximum variation width of the source levels in horizontal and in vertical measurement were less than 7.0 dB and 1.0 dB, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.5
• /
• pp.680-683
• /
• 2001

The apparent metabolisable energy (AME) and N-corrected ME (AMEn) of deoiled rice bran (DORB) were determined with adult quails at 6 and 10- week of age. The DORB obtained from two types of extraction process, Batch (DORB-B) and the Continuous (DORB-C), was each included in a practical type of the reference diet at 20 or 40% level. The analysed crude protein, ether extract, total ash, calcium, phosphorus, glucose and starch content of DORB-B and DORB-C were found at 19.0, 0.79, 17.05, 0.11, 1.92, 2.3, 11.22, and 15.02, 1.56, 13.0, 0.40, 2.76, 2.16, 19.0, respectively. The level of inclusion of DORB in diet appeared to exert a significant effect on the AME and AMEn values. When bioassayed at 20% inclusion level the DORB was found to have a significantly (p<0.01) lower value than that obtained at 40% inclusion level. However, no significant effect of age of quails on the AME values of DORB was evident. The ME bioassays with quails gave significantly (p<0.01) higher AME values for DORB-C than DORB-B thereby indicating that the continuous system of solvent extraction of rice bran is superior to the batch system from this point of view. The AME value of DORB predicted from its chemical composition also revealed that the DORB-C contained approximately 15% more energy than that in DORB-B.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.249-260
• /
• 1994

The purpose of this study was to aid in the radiation therapy of head and neck cancer patients. For this study, radiation survival curves were generated for Bl6, MG-63 and YAC-l cell lines using semiautomated MTT assay and Dye Exclusion Assay. Irradiation of 2, 4, 6, 8, 10Gy were delivered at room temperature at a dose rate of 210.2cGy/min using / sup 60/Co γ-ray Irradiator ALOORAOO 8. The viable cells were determined for each radiation dose and compared to control values. The obtained results were as follows: 1. There was significantly different absorbance at 10Gy on B16 cell line in MTT assay(P<0.05). 2. There was significantly different absorbance at 4, 6, 8, 10Gy on MG-63 cell line in MTT assay(P<0.05). 3. YAC-l cell line was more sensitive than B16 or MG-63 cell line to all doses of radiation(P<0.05). 4. There was significantly different absorbance among all tumor cell lines except between B16 and MG-63 cell line at ZGy in MTT assay(P<0.05). 5. Good correlation was obtained between MTT assay and DEA(P<0.05). The efficient of correlation of B16, MG-63 and YAC-l cell line was 0.845, 0.824 and 0.906, respectively.

• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.15-20
• /
• 1994

The effect of SiC addition on sintering behaviors and microstructures of TiB2 ceramics were studied. The sintering of TiB2 was limited due to the surface diffusion and rapid grain growth at high temperature. However the addition of SiC to TiB2 ceramics improved the densification to above 99% of the theoretical density. The sintering of TiB2-SiC composite starts at 120$0^{\circ}C$ with the melting of the oxides in particle surface as impurities. After the reduction of the oxide by additional cabon at above 140$0^{\circ}C$, the grain boundary diffusion through the interface of TiB2-SiC play an important role. TEM observation showed neither chemical reactions nor other phases formed at the TiB2-SiC interfaces but the microcracks were observed due to the mismatch of thermal expansion between TiB2-SiC.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.84-90
• /
• 2007

In this paper, the demonstration of a 130-channel optical demultiplexer based on the cascaded volume holographic gratings is presented. By serially adding the second holographic grating, which has different grating period, slant angle, and center wavelength compared to those of the first grating, the operating wavelength range of the optical demultiplexer could be expanded, and therefore, the number of channels of the holographic demultiplexer is increased by twice. As a result of the experiment, a 0.4-nm-spaced demultiplexer with the channel uniformity of 3.5 dB, the 3dB-bandwidth of 0.12nm, and the channel crosstalk of -20dB is experimentally achieved.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.282-286
• /
• 2016

A sintered body of $TiB_2$-reinforced iron matrix composite ($Fe-TiB_2$) is fabricated by pressureless-sintering of a mixture of titanium hydride ($TiH_2$) and iron boride (FeB) powders. The powder mixture is prepared in a planetary ball-mill at 700 rpm for 3 h and then pressurelessly sintered at 1300, 1350 and $1400^{\circ}C$ for 0-2 h. The optimal sintering temperature for high densities (above 95% relative density) is between 1350 and $1400^{\circ}C$, where the holding time can be varied from 0.25 to 2 h. A maximum relative density of 96.0% is obtained from the ($FeB+TiH_2$) powder compacts sintered at $1400^{\circ}C$ for 2 h. Sintered compacts have two main phases of Fe and $TiB_2$ along with traces of TiB, which seems to be formed through the reaction of TiB2 formed at lower temperatures during the heating stage with the excess Ti that is intentionally added to complete the reaction for $TiB_2$ formation. Nearly fully densified sintered compacts show a homogeneous microstructure composed of fine $TiB_2$ particulates with submicron sizes and an Fe-matrix. A maximum hardness of 71.2 HRC is obtained from the specimen sintered at $1400^{\circ}C$ for 0.5 h, which is nearly equivalent to the HRC of conventional WC-Co hardmetals containing 20 wt% Co.

• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.599-604
• /
• 1991

The physico-chemical properties of viscous substances extracted from chungkook-jang were investigated. The crude protein content of the viscous substance was approximately 61% and 32% of the crude protein content was amino type nitrogen. The contents of glutamic acid in amino acids and potassium in minerals of viscous substances were more higher than those of raw soybean and chungkook-jang. The viscosity of 5% viscous substance solution was higher than that of 15% sucrose solution. The transmittance of viscous substance solutions from Bacillus natto and Bacillus subtilis was lowest at pH 5.0, the absorbances were lowest at pH 5.5 and pH 4.0, respectively. The fibrinolytic activity of viscous substances by B. natto and B. subtilis was 0.438 and 0.163 unit/mg protein, respectively. Though viscous substances were heated for 5 min and 30 min at $100^{\circ}C$, 90% of and 45% the fibrinolytic activity was remained, respectively.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.139-143
• /
• 2005

We evaluated grapefruit seed extract for antibacterial activity at varying time intervals and concentration levels against heat tolerant and spore-forming Bacillus stearothermophilus, mesophilic Bacillus subtilis, and food poisoning Staphylococcus aureus. Grapefruit seed extract showed growth inhibitory activity against B. stearothemophilus and B. subtilis, and S. aureus at the level of 0.01 tp 0.03% in nutrient broth. However, when applied to soymilk in a market, grapefruit seed extract at the level above 0.2% effectively inhibited the growth of B. stearothermophilus, However, it failed to completely sterilize the test organisms. On the other hand, B. subtilis and S. aureus were completely sterilized at the level of 0.2% within 48 hrs and 72 h, respectively. The higher concentration of grapefruit seed extracts showed more effective antibacterial activities against the test organisms, but caused deteriorated organoleptic quality and emulsion stability. We could conclude, by applying grapefruit seed extract (0.015%) with thermal treatment (10 min at $121^{\circ}C$) that the microbial stability of commercial soymilk was enhanced greatly.