• 제목/요약/키워드: $ZnAl_2O_4$

검색결과 438건 처리시간 0.025초

저수지 퇴적물로부터 인의 존재형태가 수질에 미치는 영향에 대한 연구 (A Study on the Influence of Water Quality on the Phosphorus Fraction Properties from Reservoir Sediments)

  • 이진경;안태웅;오종민
    • 대한환경공학회지
    • /
    • 제32권9호
    • /
    • pp.840-850
    • /
    • 2010
  • 새만금호와 인접한 배후지역에 위치하며 새만금 수질에 직 간접적으로 영향을 미치는 간척농지 지구 계화조류지를 대상으로 환경변화에 의해 수계로 용출되어 부영양화의 주원인이 되는 인의 존재형태와 수계내 영향인자 사이의 상관관계를 분석하였다. 계화조류지 퇴적물 내 인의 존재형태 조사 결과, 전체적으로 Saloid-P의 형태가 2.28~7.75 mg/kg(1.4%), Al-P 0.34~5.36 mg/kg (0.5%), Fe-P 31.04~837.25 mg/kg (39.8%), Ca-P 149.91~257.09 mg/kg (56.6%), Red-P 0.29~2.07 mg/kg (0.4%), Occd-P 2.23~8.89 mg/kg (1.3%)를 나타냈다. 퇴적물내 인의 존재형태를 비교하면, 계화조류지는 Ca-P (56.6%)와 Fe-P (39.8%) 의 형태가 97% 이상이며, 계화조류지 퇴적물내 인의 형태중 대부분을 차지하는 Ca-P와 Fe-P의 형태에 영향을 미치는 수계내 인자를 분석한 결과, Fe-P는 총질소(T-N) (r=0.761, p<0.05)와 질산성질소($NO_3$-P) (r=0.754, p<0.05), 암모니아성질소($NH_4$-N)(r=0.728, p<0.05), 총인(T-P) (r=0.774, p<0.05), 용존성 무기인($PO_4$-P) (r=0.767, p<0.05)과 유의성 있는 상관관계를 나타냈으나 Ca-P의 형태는 조사항목 중 수계내 인자와의 유의성을 발견하지 못하였다. 퇴적물내 중금속이 인의 존재형태에 미치는 영향 조사 결과, Ca-P 형태의 인은 특정 중금속과 상관관계를 나타내지 않았으나, Fe-P 형태의 인은 비소(As) (r=0.817, p<0.01), 구리(Cu) (r=0.793, p<0.05), 카드뮴(Cd) (r=0.786, p<0.05), 아연(Zn) (r=0.738, p<0.05)과 높은 상관관계를 보였다.

Carbon nanotube field emission display

  • Chil, Won-Bong;Kim, Jong-Min
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제12권7호
    • /
    • pp.7-11
    • /
    • 1999
  • Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

  • PDF

경북(慶北) 봉화군(奉化郡) 장군광산산(將軍鑛山産) 신종광물(新種鑛物) 장군석(將軍石)에 대(對)한 광물학적(鑛物學的) 연구(硏究) (Janggunite, a New Mineral from the Janggun Mine, Bonghwa, Korea)

  • 김수진
    • 자원환경지질
    • /
    • 제8권3호
    • /
    • pp.117-124
    • /
    • 1975
  • 경북(慶北) 봉화군(奉化郡) 소재(所在) 장군광산(將軍鑛山)의 표성산화(表成酸化)망간광석중(鑛石中)에서 필자(筆者)에 의(依)하여 발견명명(發見命名)된 신종건물(新種鍵物) 장군석(將軍石)은 국제(國際) 광물학회내연합(鑛物學會內聯合)에 있는 "신종광물(新種鑛物) 및 광물명위원회(鑛物名委員會)"의 공인(公認)을 받았는바 이에 대(對)한 광물학적(鑛物學的)인 연구결과(硏究結果)를 요약(要約)하면 다음과 같다. (1) 장군석(將軍石)은 표성산화(表成酸化)망간 광석중(鑛石中) cementation zone에서 산출(産出)되며, 엔소타이트, 토도로카이트, 방해석(方解石)을 수반(隨伴)한다. 대체로 공동(空洞)에서 수기상(樹技狀) 또는 방사상(放射狀)을 이루는 엽편상(葉片狀) 세립집합체(細粒集合體)(입자(粒子)의 크기 <0.05mm)로 또는 교질상대(膠質狀帶)로 산출(産出)한다. (2) 색(色)은 흑색(黑色)이며 광택(光澤)은 무염(無艶), 조흔(條痕)은 흑갈(黑褐)~암갈(暗褐色)이다. 벽개(劈開)는 한방향(方向)으로 완전(完全)하다. 경도(硬度)(H)=2-3이며 역쇄성(易碎性)이다. 비중(比重)(G)=3.59(실측시(實測植)), 3.58이론치(理論値)이다. (5) 화학분석치(化學分析値)로부터 계산(計算)된 장군석(將軍石)의 화학식(化學式)은 $Mn^{4+}{_{4.85}}(Mn^{2+}{_{0.90}}Fe^{3+}{_{0.30}})_{1.20}O_{8.09}(OH)_{5.91}$이며, 이상식(理想式)은 $Mn^{4+}{_{5-x}}(Mn^{2+},\;Fe^{3+}){_{1+x}}O_8(OH)_6$ ($x{\approx}0.2$)이다. (6) 장군석(將軍石)은 사방정사 속(屬)하며 X선(線) 분말회절분석(粉末廻折分析) 결과(結果), 단위포(單位胞)의 크기는 $a=9.324{\AA}$, $b=14.05{\AA}$, $c=7.956{\AA}$이며, 단위포(單位胞)의 체적(體積)은 $1042.25{\times}10^{-24}cm$이다. 보솔(輔率) a : b : c=0.663 : 1 : 0.566. 단위포함유수(單位胞含有數) (Z)=4. (7) 시차열분석곡선(示差熱分析曲線)은 $250{\sim}370^{\circ}C$$955^{\circ}C$에서 흡열(吸熱)피크를 보여준다. 전자(前者)는 장군석(將軍石)이 탈수(脫水) 및 산화(酸化)를 받아 $(Mn,\;Fe)_2O_3$이 생성(生成)된데 기인(基因)하며 후자(後者)는 hausmannite 형(型)의 구조(構造)를 갖는 $(Mn,\;Fe)_3O_4$의 생성(生成)에 기인(基因)하는 것이다. $(Mn,\;Fe)_2O_3$는 등보정사이고 $a=9.417{\AA}$이었고 $(Mn,\;Fe)_3O_4$는 정방정사이고 $a=5.76{\AA}$, $c=9.51{\AA}$이었다. (6) 장군석(將軍石)의 적외선흡수분광(赤外線吸收分光)스펙트럼은 $515cm^{-1}$$545cm^{-1}$에서 Mn-O stretching 진동(振動)을, $1025cm^{-1}$에서 O-H bending 진동(振動)을 그리고 $3225cm^{-1}$에서 O-H stretching 진동(振動)을 보여준다. (3) 장군석(將軍石)은 불투명광물(不透明鑛物)이며 현미경하(顯微鏡下)에서 반사도(反射度)는 13~15%이고 복반사율(複反射率)은 공기중(空氣中)에서 현저(顯著)하며 침액중(浸液中)에서 강(强)하다. 반사다색성(反射多色性)은 백색(白色)~담회색(淡灰色)이다. 십자(十字)니콜하(下)에서의 편광색(偏光色)은 공기중(空氣中)에서 청색(靑色)을 띈 황갈(黃褐)~회색(灰色)이고 침액중(浸液中)에서는 黃褐(황갈)~청갈(靑褐)~회색(灰色)이다. 내부반사(內部反射)는 없다. (4) 연마면(硏磨面)에 대(對)한 에칭반응(反應)은 HCl(conc.)와 $H_2SO_4+H_2O_2$ 회색(灰色), 퇴색(褪色), SnCl(sat.): 암색(暗色), $HNO_3$ (conc.) : 회색(灰色), $H_2O_2$ : 거품을 내며 퇴색(褪色). (9) 신종광물(新種鑛物) 장군석(將軍石)은 독특(獨特)한 화학조성(化學組成)과 단위포(單位胞)를 가지고 있어서 이의 발견(發見)은 산화(酸化)망간광물(鑛物)의 분류(分類)와 연구(硏究)에 새로운 방향(方向)과 지침(指針)이 되었다.

  • PDF

증착 변수에 따른 TCO 박막의 전기적 및 광학적 특성 (The Electrical and Optical Characteristics of TCO Thin Films with Processing Parameters)

  • 정충헌;홍윤정;김혜진;이규만;안진형;김상호;김영철
    • 한국반도체및디스플레이장비학회:학술대회논문집
    • /
    • 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
    • /
    • pp.64-67
    • /
    • 2006
  • RF 스퍼터링법을 이용하여 AZO(Al 2wt%, ZnO 98wt%)박막을 glass위에 증착한 후 증착 시간과 증착 압력에 따른 면저항, roughness 및 광투과도를 조사하였다. 본 연구에서 AZO박막의 면 저항은 4-point probe(Guardian, 402S)으로 측정하였으며 광투과도는 IR-VIS-UV spectrophotometer로 측정하였다. AZO 박막을 20분 증착하는 동안, 아르곤 flow양이 50, 100, 150sccm일 때 면저항은 $20\;{\Omega}/{\square}$이고, 200sccm일 때 $3744\;{\Omega}/{\square}$였다. AZO 박막의 두께를 일정하게 증착하는 동안, 아르곤 flow양이 50sccm일 때 면저항은 $49.6\;{\Omega}/{\square}$이고 100, 150, 200sccm일 때 $38{\Omega}/{\square}$였으며, 광투과도는 모두 80%이상을 보였다. Roughness는 각각 4.1nm, 7.6nm, 5.2nm, 16.9nm였다.

  • PDF

Characterization of Size Distribution and Water Solubility of 15 Elements in Atmospheric Aerosols

  • Park, Jeong-Ho;Sun, Jeong-Min;Park, Kum-Chan
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제17권E1호
    • /
    • pp.1-7
    • /
    • 2001
  • The elemental characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The aerosol particles were samples at 12 individual size ranges between 0.01 and 30㎛. Collected aerosol particles were separated into both soluble and insoluble components. The concentrations of 15 elements in both components were determined by a PIXE analysis using a 2.0 MeV-proton beam. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The maximum rations of S in July and December were 5.5 and 3.8 %, and they appeared in the size range of 0.47∼1.17㎛(stage No. 6 or 7) . The ratios of a S at non-separated size were 3.1 and 2.2 % in July and December, respectively, On the other hand, the maximum rations of Si in July and December were 7.0 and 5.4% and they appeared in the size range of 5.1∼30㎛(stage No. 0∼2). The ratios of Si at the non-separated size were 2.1 and 1.8% in July and December, respectively, The mass diameter of 12 elements ranged between 0.59㎛ of S and 3.20 of Fe. More than 90% of atmospheric aerosols consisted of the light elements such as C, N, O, H and Al. The soluble component was dominant in the smaller size range and the insoluble component in the larger size range. Large portions of Si. Ti and Fe existed in insoluble state. By contrast, S, Cl, Ca, Zn and Br were dissolved in water.

국내산 식용 지하 부위 채소의 생산지역에 따른 무기질 성분 함량에 관한 연구 (Mineral Contents of Underground Vegetables Produced in Different Regions of Korea)

  • 장경미;이미순
    • 한국식품조리과학회지
    • /
    • 제16권5호
    • /
    • pp.425-430
    • /
    • 2000
  • 우리 나라에서 재배하여 생산한 식용 지하 부위 채소들(감자, 고구마, 당근, 무, 양파, 마늘)의 생산지역에 따른 무기질 성분의 차이와 중금속 함유 여부를 알아보기 위하여 그 성분을 분석하였다. 먼저 microwave digestion oven에서 시료를 HNO$_3$ 4ml(65%)과 $H_2O$$_2$1ml(30%)로 용액 화하여 hot plate에서 시료를 1 ml까지 휘발시켜서 1% HNO$_3$로 희석한 후 ICP-AES로 무기질 성분을 정성, 정량 분석하였다. 모든 시료에서 가장 많이 분석된 무기성분은 K이었으며 각각의 성분 함유도는 모든 시료마다 다르게 나타났다. 감자는 다른 식용지하 부위 채소에 비해 Na와 Fe의 함량이 상대적으로 낮게 분석되었는데 K, P, Mg순의 함량을 보였고 K은 김포 지방산이, Ca는 삼척 지방산이 많이 함유한 것으로 조사되었다. 고구마는 분석한 거의 모든 지역에서 Ca 함량이 감자의 두 배 이상으로 높게 나타났다. 당근은 Na 함량이 다른 채소에 비해 높았으며 특히 진부 지방산이 많이 함유하고 있었다. 무는 K, Ca, P, Mg 순으로 함량이 높았는데 특히 양구 지방산이 높게 나타났다. 또한 Ca의 함량이 높았는데 감자의 5-8배였고, 다른 지하 부위 채소와 비교하여도 2-3배 이상이었다. 양파는 K, P Ca의 함량이 타 채소에 비해 낮게 분석되었었는데 지역별 차이는 많지 않았으며 문경 지방산이 Ca의 함량이 높았다. 마늘의 경우 K의 함량은 의성 지방산이, Ca의 함량은 서산 지방산이 높았으며 K과 P의 함량이 상대적으로 높았다.

  • PDF

Methyl Methacrylate의 Emulsion Polymerization에 關한 硏究 (A Study on the Emulsion Polymerization of Methyl Methacrylate)

  • 이형규;민태익
    • 대한화학회지
    • /
    • 제12권1호
    • /
    • pp.4-11
    • /
    • 1968
  • With the selected emulsifiers for the emulsion polymerization of methyl methacrylate, the HLB of the emulsifier in the reaction system has been studied on the effect of the ratio of tetra sodium-N-(1,2-dicarboxy ethyl)-N-octadecyl sulfosuccinamate(Aerosol 22) to polyethylene glycol nonyl phenyl ether (Noigen EA 160), and also sodium lauryl sulfate(Quolac EX-UB), Disodium-N-octadecyl sulfosuccinamate (Aerosol 18) and Aerosol 22 as emulsifiers having various hydrophilic groups in the molecules have been studied. Results are as follows; 1) The viscosity of the emulsions and the molecular weight of the polymers have maximum values at a constant HLB value of emulsifiers, but their stabilities show minimum point at the value with the titration with the three kinds of mono, bi, tri-valent electrolytes. These results are agreed on the theory of Greth & Wilson in which the properties of polymer emulsions depend upon the HLB system of emulsifiers. 2) The viscosity of the emulsions and the molecular weights of the produced polymers increase more in the case of blending of Aerosol 22 to Noigen EA-160 than of the separate using. 3) The coagulation effects of the divalent electrolytes($ex,\;Ca^{++},\;Zn^{++}$) are contrast to the effects of monovalent($ex,\;Na^+$) and trivalent($ex,\;Al^{+++}$) in the emulsions with Aerosol 18 or Aerosol 22 which have more than two hydrophilic groups. It seems that the stability of the O/W emulsions by electrolytes is directly related to the parameters of surface physical chemistry such as surface geometry of surface chemical constitution of polymer particles.

  • PDF

브래그 반사층 구조와 멤브레인 구조의 체적 탄성파 공진기 필터의 이론적 분석 (Theoretical Analysis of FBARs Filters with Bragg Reflector Layers and Membrane Layer)

  • 조문기;윤영섭
    • 대한전자공학회논문지SD
    • /
    • 제39권4호
    • /
    • pp.41-54
    • /
    • 2002
  • 본 논문에서는 등가회로를 이용하여 브래그 반사층형 FBAR (Film Bulk Acoustic Wave Resonator) 와 membrane 형 FBAR 그리고 상 하부 전극이 공기와 접하는 이상적인 FBAR 의 특성을 서로 비교함으로서 브래그 반사층과 membrane 이 공진 특성에 미치는 영향을 분석하였다. 압전층으로는 ZnO, membrane 층과 낮은 음향적인 임피던스 반사층은 SiO₂, 높은 음향적인 임피던스 반사층으로는 W, 전극층으로는 Al를 가정하였고 각 층은 탄성파 전달 손실을 가정하였다. 1-port 의 등가회로를 ABCD 파라미터를 추출할 수 있는 단순화된 등가회로로 변환하여 ABCD 파라미터를 추출하여 입력임피던스를 계산하였다. 필터 설계에서는 구하여진 파라미터를 산란행렬로 변환하여 필터의 대역폭 및 삽입손실을 구하였다. 전극층, 반사층, membrane 층의 두께 변화에 의한 공진주파수의 변화는 membrane 층과 전극 바로 아래의 반사층의 두께 변화가 가장 큰 영향을 미친다는 결과를 확인하였다. 반사층 구조에서 반사층수에 따른 공진특성과 K/sub eff/와 electrical Q 의 변화에서는 반사층수가 K/sub eff/ 에는 거의 영향을 미치지 않지만 electrical Q 는 층수가 증가할수록 증가하다가 7층 이상에서 포화되었다. 또한 FBAR의 electrical Q 는 membrane 층과 반사층의 mechanical Q 에 의존함을 알 수 있었다. Ladder 필터와 SCF(Stacked Crystal Filters) 모두 공진기의 수가 증가할수록 삽입손실과 out-of-band rejection 이 증가하였고 층수가 증가할수록 삽입손실은 감소하지만 대역폭에는 거의 변화가 없었다. membrane형의 ladder 필터와 SCF 는 불효 공진 특성으로 인한 불효응답특성이 나타났다. 또한 ladder 필터는 보다 우수한 대역폭의 skirt-selectivity 특성을 나타내었으며 SCF 는 대역폭의 삽입손실 측면에서 더 우수하였다.

마산항 표층 퇴적물의 유기물 및 금속원소의 분포 (Distribution of Organic Matters and Metallic Elements in the Surface Sediments of Masan Harbor, Korea)

  • 황동운;진현국;김성수;김정대;박종수;김성길
    • 한국수산과학회지
    • /
    • 제39권2호
    • /
    • pp.106-117
    • /
    • 2006
  • We measured the concentrations of organic matter and metallic elements (Al, Fe, Cr, Mn, Ni, Cu, Zn, As, Cd, Pb and Hg) in the surface sediments of Masan Harbor (in the southern sea, Korea) to evaluate the geochemical characters of sediment and the pollutions by organic matter and metallic elements. The mean grain size of the surface sediments in the study area ranged from $5.6{\phi}$ to $7.8{\phi}$, indicating silt sediment. The water content of the surface sediments exceeded 60% except at some stations. The contents of ignition loss (IL), total organic carbon (TOC) and total nitrogen (TN) ranged from 7.2-14.3%, 1.2-3.2%, and 0.10-0.28%, respectively. Based on the C/N ratios, the organic matter in the surface sediments of Masan Harbor may originate from terrigenous sources including fluvial inputs (mainly sewage in urban areas). The chemical oxygen demand (COD) and acid volatile sulfide (AVS) ranged from $11.3-29.9\;mgO_2/g\;dry$ and 0.20-4.47 mgS/g dry, respectively, and low concentrations were observed near a shipping route. In addition, the concentrations of metallic elements showed large spatial variations in Masan Harbor and the distributions of metallic elements were also comparable to those of organic matter. This implies that the distributions of organic matter and metallic elements in the surface sediments of Masan Harbor are mainly controlled by biogenic matter and artificial action (mainly dredging). In addition, we calculated the enrichment facto. (EF) and geoaccumulation index (Igeo) in order to evaluate pollution by metallic elements. The enrichment of metallic elements relative to Al was three to eighteen times higher at the study sites, compared to levels in the Earth's crust except for Fe, Ni and Mn. In addition, the Igeo class indicated that the surface sediments in the study area were moderately to strongly polluted in terms of metallic elements.

Flip Chip의 Solder Bump 형성을 위한 Ni/Au 무전해 도금 공정 연구 (Ni/Au Electroless Plating for Solder Bump Formation in Flip Chip)

  • 조민교;오무형;이원해;박종완
    • 한국재료학회지
    • /
    • 제6권7호
    • /
    • pp.700-708
    • /
    • 1996
  • Flip chip bonding에 무전해도금기술을 적용하여 solder bumper형성의 최적 조건을 규명하였다. 시편은 AI 패턴된 4 inch Si 웨이퍼를 사용하고, 활성화 처리시 zincate 용액을 사용하였으며, 무전해 도금은 Ni-P 도금액고 Au immersion 용액을 사용하였다. 활성화 물질의 AI 침식정도 및 Zn 석출 정도를 알아보기 위하여 EDS측정을 하였고, 각 공전에서의 표면형상을 알아보기 위해 SEM 분석을 하였다. 열처리 후 금도금층의 주 결정성장 방향은 XRD를 이용하여 측정하였다. 산처리에서 질산과 황산 중 질산에 의한 산화막제거 정도가 더 우수하게 나타났다. 활성화 처리시 zincate 용액을 희석시킬수록 입자 크기가 미세해 지고, 활성화 물질은 pH 13-13.5, 상온, 농도 15-25%의조건에서 크기가 작은 Zn 활성화 물질이 균일하게 분포하였다. Ni과 Auan전해도금 속도는 온도와 pH가 증가할수록 증가하였다. Ni 무전해 도금 조건은 pH 4.5, 온도 $90^{\circ}C$, 시간 20분이며, Au 무전해 도금조건은 pH7, 온도 $80^{\circ}C$, 시간 10분이었다. 상온에서 $400^{\circ}C$까지 30분동안 열처리 한 후 금도금막의 결정 방향은 pH 7, 온도 $80^{\circ}C$, 시간 10분이었다. 상온에서 $400^{\circ}C$까지 30분 동안 열처리 한 후 금도금막의 결정 방향은 pH 7에서 (111), pH 9에서는 (200)과 (111)이 주 peak로 나타났으며, 열처리에 의한 결정 방향의 변화는 없었다. 전체 공정에서 최종적인 표면 형상에 영향을 주는 단계는 활성화 처리로서 flip chip의 bonding layer형성에 가장 중요한 요소임을 알 수 있었다.보다 자생지(自生地)에서 높은 함량(含量)을 보였다. 5. 무기성분함양(無機成分含量)의 차이(差異)는 K의 경우(境遇) 자생지(自生地)에서 보다 재배지(栽培地)에서 평균적(平均的)으로 10배이상(倍以上) 정도(程度) 높은 함량(含量)의 차이(差異)를 보였으나 Mn, Zn, Na, Cu 등(等)은 일정(一定)한 경향(傾向)을 보이지 않는 것으로 나타났다. 6. 유리(遊離) 아미노산(酸)의 함량(含量)은 자생지(自生地은)보다 재배지(栽培地)에서 전반적(全般的)으로 높은 함량(含量)을 나타내었고, 특(特)히 Arginine은 다른 성분(成分)들과 비교(比較)해 볼 때 가장 높은 조성(組成)의 차이(差異)를 나타내었다. 7. 야생(野生)더덕과 재배(栽培)더덕의 정유성분수율(精油成分收率)은 자생지재배(自生地栽培)에서는 모두 0.004% 였고 재배지(栽培地)에서는 야생(野生)더덕이 0.005%였다. 8. 더덕의 재배장소(栽培場所)에 따른 향기성분(香氣成分)은 총(總) 21종(種)이었으며 自生地(自生地)에서 야생(野生)더덕은 16종(種), 재배(栽培)더덕은 18종(種)이었고, 재배지(栽培地)에서 야생(野生) 더덕은 14종(種), 재배(栽培)더덕은 20(種)이었다. 9. Trans-2-hexanol은 야생(野生)더덕의 자생지(自生地) 재배(栽培)에서 피이크 면적(面積) 당(當) 50.3%, 재배지(栽培地)에서 피이크 면적(面積) 당(當) 43.3%를 보였으며 amylalcohol, furfuryl acetate, 2-methoxy-4-vinyl phenol(MVP)는 재배(栽培)더덕에서만 확인(確認)되었다.는 KI, BMI와 유의적인 양의 상관관계를 보였고 (p<0.01), HCL-C은 비체중, BMI, LBM, TBM와 유의적인 음의 상관관계를 보였으며, (p<0.01), KI, SBP와도 음의 상관관계를 보였다. (p<0.05), LCL-C는 KI와 유의적이인 양의

  • PDF