• The Journal of Korean Society for Radiation Therapy
• /
• v.35
• /
• pp.7-13
• /
• 2023

Purpose: In this study, we evaluated the effect of using a customized bolus on dose delivery in the treatment plan when cervical cancer protruded out of the body along with the uterus and evaluated reproducibility in patient set-up. Materials & Methods: The treatment plan used the Eclipse Treatment Planning System (Version 15.5.0, Varian, USA) and the treatment machine was VitalBeam (Varian Medical Systems, USA). The radiotherapy technique used 6 MV energy in the AP/PA direction with 3D-CRT. The prescribed dose is 1.8 Gy/fx and the total dose is 50.4 Gy/28 fx. Semiflex TM31010 (PTW, Germany) was used as the ion chamber, and the dose distribution was analyzed and evaluated by comparing the planned and measured dose according to each position movement and the tumor center dose. The first measurement was performed at the center by applying a customized bolus to the phantom, and the measurement was performed while moving in the range of -2 cm to +2 cm in the X, Y, and Z directions from the center assuming a positional error. It was measured at intervals of 0.5 cm, the Y-axis direction was measured up to ±3 cm, and the situation in which Bolus was set-up incorrectly was also measured. The measured doses were compared based on doses corrected to CT Hounsfield Unit (HU) 240 of silicon instead of the phantom's air cavity. Result: The treatment dose distribution was uniform when the customized bolus was used, and there was no significant difference between the prescribed dose and the actual measured value even when positional errors occurred. It was confirmed that the existing sheet-type bolus is difficult to compensate for irregularly shaped tumors protruding outside the body, but customized Bolus is found to be useful in delivering treatment doses uniformly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.4
• /
• pp.549-556
• /
• 2015

This study extracted radish bud (Raphanus sativus L.) and investigated its nitrite scavenging activity, superoxide dismutases (SOD)-like activity, tyrosinase inhibition activity, xanthine oxidase inhibition activity, and angiotensin-converting-enzyme (ACE) inhibition activity according to extraction solvent and sprouting period. For nitrite scavenging activity, each extract recorded its highest level of 81.44~89.71% at pH 1.2. Radish bud extracts on sprouting days 4 and 8 showed greater scavenging activities than those on sprouting day 12 at pH 1.2 and pH 4.0. There were differences in scavenging activity according to extraction solvent based on water extract exhibiting improved scavenging activity. Ethanol extract recorded scavenging activity of 16.12% at pH 6.0, which was similar to those of ethanol and methanol radish bud extracts on sprouting day 12. SOD-like activity of radish bud extracts was in the range of 4.57~27.05%. For comparison purposes, SOD-like activity of L-ascorbic acid was 52.15%, which was higher than that of radish bud extracts. Acetone and methanol extracts showed high SOD-like activities on sprouting day 8. SOD-like activity of radish bud extracts on sprouting day 12 significantly decreased to 4.57~15.59%. Radish bud extracts recorded good tyrosinase inhibitory activities on sprouting 8 and 12, whereas methanol extracts recorded the greatest tyrosinase inhibitory activity at 62.65~84.89%. Radish bud extracts recorded xanthine oxidase inhibition activity of 21.26~29.52% on sprouting day 4, and acetone extracts showed the highest level of xanthine oxidase inhibition activity. Xanthine oxidase inhibitory activity tended to decrease with sprouting period compared early on. ACE inhibitory activity was in the range of 12.48~51.78% according to sprouting period and extraction solvent. Ethanol extracts on sprouting day 8 showed the highest ACE inhibitory activity of 51.78%. These results will hopefully contribute to research into the identification of materials and development of products for natural functional foods.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.289-295
• /
• 2014

Purpose : Cone Beam Computed Tomography(CBCT) in Image Guided Radiation Therapy(IGRT), Set-up error can be reduced but exposure dose of the patient due to CBCT will increase. Through this study, we are to evaluate by making a scenario with the implementation period of CBCT as every other day. Materials and Methods : Of prostate cancer patients, 9 patients who got a Intensity Modulated Radiation Therapy(IMRT) with CBCT in IGRT were analyzed. Based on values corrected by analyzing set-up error by using CBCT every day during actual treatment, we created a scenario that conducts CBCT every other day. After applying set-up error values of the day not performing CBCT in the scenario to the treatment planning system(Pinnacle 9.2, Philips, USA) by moving them from the treatment iso-center during actual treatment, we established re-treatment plan under the same conditions as actual treatment. Based on this, the dose distribution of normal organs and Planning Target Volume(PTV) was compared and analyzed. Results : In the scenario that performs CBCT every other day based on set-up error values when conducting CBCT every day, average X-axis : $0.2{\pm}0.73mm$, Y-axis : $0.1{\pm}0.58mm$, Z-axis : $-1.3{\pm}1.17mm$ difference was shown. This was applied to the treatment planning to establish re-treatment plan and dose distribution was evaluated and as a result, Dmean : -0.17 Gy, D99% : -0.71 Gy of PTV difference was shown in comparison with the result obtained when carrying out CBCT every day. As for normal organs, V66 : 1.55% of rectal wall, V66 : -0.76% of bladder difference was shown. Conclusion : In case of a CBCT perform every other day could reduce exposure dose and additional treatment time. And it is thought to be able to consider the application depending on the condition of the patient because the difference in the dose distribution of normal organs, PTV is not large.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.183-193
• /
• 1988

The relationship between the sulfur fertilization, and the quality and yield of garlic was investigated. The garlic was grown in pot and field at the five fertilization levels of sulfur. The growth characteristics, yield and flavour components of the garlic were studied. The results were summarized as follows; 1. The sulfur applications contributed to a weight and yield of the bulb in SP-10 (10kg/10a) and SF-20 (20kg/10a) significantly, respectively. 2. From the volatile oil obtained by steam distillation of garlic, fourteen organie sulfur components were separated, identified and quantified by GC and GC/MASS and the SP-10 and SF-20 were higher in the concentration of the flavour components in the volatile oil than other treatments. 3. It is considered that the organic sulfur components were synthesized in the top and transported to the bulb of the garlic. 4. In conclusion, SF-20, 20kg/sulfur per 10a, could be recommended to get maximum yield and a good quality of garlic in view of evaluation through the contents of organic sulfur components in the volatile oil and the yield of the bulb.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.431-438
• /
• 2003

This study investigates pulp chamber temperature rise during composite resin polymerization by plasma arc(Group III : Flipo 3 sec, Group IV : Flipo 5 sec) and LED curing units(Group V : Lux-O-Max, 40 sec) as well as conventional halogen lamp curing units(Group I : VIP mode3, 20 sec, Group II : VIP mode6, 20 sec). The results are as follows : 1. All of the investigated pulp chamber temperature rises are lower than the boundary temperature could result in irreversible damage to the pulpal tissue ($5.5^{\circ}C$). 2. In the group II, it is found the significantly higher pulp chamber temperature rise than any other groups(p<0.05). 3. In the group of composite resin light-cured with VIP, it is found the significantly higher pulp chamber temperature rise in the group II than group I(p<0.05). 4. In the group of composite resin light-cured with Flipo, it is found the significantly higher pulp chamber temperature rise in the group IV than group III (p<0.05). 5. In the case of comparing VIP and Flipo, group II is significantly higher pulp chamber temperature rise than group III, IV(p<0.05), and group IV is significantly higher pulp chamber temperature rise than group I(p<0.05), and it does not significantly differ between group I and III. 6. In the group of composite resin light-cured with Lux-O-Max, it is found the significantly lower pulp chamber temperature rise than any other groups (p<0.05).

• Korean Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.356-367
• /
• 2012

Community structure of fish and inhabiting status of endangered species, Cobitis choii and Gobiobotia naktongensis were investigated in the Ji Stream, a tributary of the Geum River Drainage System of Korea from May to October 2011. Ten to 23 fish species inhabited upper stream (St. 1~St. 4) with a Aa-Bb river type composed of mostly pebble and cobble bottoms, 16~28 species did middle stream (St. 5~St. 7) with a Bb type composed of mostly cobble and boulder bottoms, and 20-29 species did lower stream (St. 8~St. 10) with a Bb-Bc type composed of mostly sand bottoms. A total of 44 species belonging to nine families were found in the stream during the survay. The dominant species were in the order of Zacco platypus (37.2%), Pungtungia herzi (5.8%) and Pseudogobio esocinus (5.5%). Other abundant species included Acheilognathus lanceolatus (5.3%), Zacco koreanus (5.2%), Hemibarbus longirostris (4.9%) and Squalidus gracilis majimae (3.5%). Among residing species, 16 species were endemic to Korea, two (Cobits choii and Gobiobotia naktongensis) were endangered, and one (Micropterus salmoides) was non-indigenous. The similarity index based on species composition and abundance clearly delineated the fish community of the Ji Stream according to the three major sections, which were defined at the above. Dominance index gradually decreased toward downstream, while diversity, evenness and species richness indexes gradually increased toward downstream. The two endangered species, C. choii and G. naktongensis co-occurred at the lower stream due to the prevalence of a sandy substratum.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.196-205
• /
• 2008

Variability in vertical ozone and meteorological profiles was measured by 2Z electrochemical concentration cells (ECC) ozonesonde at Bangyi in Seoul ($37.52^{\circ}N$, $127.13^{\circ}E$) during June $6{\sim}9$, 2003 in odor to identify the vertical distribution of ozone and its relationship with the lower-atmospheric structure resulted in the high ozone concentrations near the surface. The eight profiles obtained in the early morning and the late afternoon during the study period clearly showed that the substantial change of ozone concentrations in lower atmosphere(${\sim}5\;km$), indicating that it is tightly coupled to the variation of the planetary boundary layer (PBL) structure as well as the background synoptic flow. All profiles observed early in the morning showed very low ozone concentrations near the surface with strong vertical gradients in the nocturnal stable boundary layer due to the photochemical ozone loss caused by surface NO titration under very weak vertical mixing. On the other hand, relatively uniform ozone profiles in the developed mixing layer and the ozone peaks in the upper PBL, were observed in the late afternoon. It was noted that a significant increase in ozone concentrations in the lower atmosphere occurred with the corresponding decrease of the mixing height in the late afternoon on June 8. Ozone in upper layer did not vertically vary much compared to that in PBL but changed significantly on June 6 that was closely associated with the variation of synoptic flows. Interestingly, heavily polluted ozone layers aloft (a maximum value of 115 ppb around 2 km) were formed early in the morning on 6 through 7 June under dominant westerly synoptic flows. This indicates the effects of the transport of pollutants on regional scale and consequently can give a rise to increase the surface ozone concentration by downward mixing processes enhanced in the afternoon.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.2
• /
• pp.114-120
• /
• 1994

To clarify the effect of storage temperature on the morphological and histological changes of plaice, Paralichthys olivaceus muscle at early stages after killing, the changes in breaking strength of muscle, morphological observation of myofibrils and histological observation of extracellular spaces during storage at $0^{\circ}C\;and\;10^{\circ}C$ were studied. The maximum breaking strength of samples stored at $0^{\circ}C$ was reached within 10hrs and then it dropped significantly (p<0.05) from 10hrs to 25hrs of storage. However, breaking strength was not increased in fresh muscle stored at $10^{\circ}C$ and gradually decreased after 10hrs storage. In myofibrils prepared from dorsal muscle immediately after death, A-band, I-band, H-band and Z-line in sarcomere were clearly distinguishable from each other. Due to muscle contraction, it was not easy to distinguish H-band from I-band observed in sarcomere stored at $0^{\circ}C$ after 10hrs storage. But, in the case of samples stored at $10^{\circ}C$, H-band could be observed dimly until 15hrs of storage. The changes in morphological myofibrils were closely related to increase of breaking strength. No extracellular space was observed among muscle cells immediately after killing. Stored samples at $0^{\circ}C$ showed extracellular spaces after 15hrs storage. On the other hand, samples stored at $10^{\circ}C$ didn't show any extracellular spaces until 15hrs storage and showed extracellular spaces after 24hrs storage. It was thought that the post-mortem tenderization of plaice muscle was closely related to the gradually disintegration of the extracellular matrix structure after killing.

• Korean Journal of Environment and Ecology
• /
• v.23 no.2
• /
• pp.208-219
• /
• 2009

This study is to establish a management method for conservation through comparison and analysis on vegetation structures of Pinus densiflora forest around Beopjusa area for past 17-year. The spatial range of the study was $3.6km^2$ from maintenance office to Beopjusa area. The analysis results of the actual vegetation showed that the ratio of vegetation were composed of 64.7% of Pinus densiflora forest, 3.2% of mixed forest of P. densiflora and deciduous broadleaf trees and 5.9% of deciduous broadleaf tree community out of overall area, 360ha. The type of P. densiflora forest were categorized into four communities; community having high potential of succession, community having low potential of it, the community being in the process of succession and community being in the process of natural selection. The succession tendency was in order of the community having low potential of succession(P. densiflora forest), having high potential of it(P. densiflora forest which is deciduous broadleaf trees are dominating in sub-canopy layer), being in the process of succession(P. densiflora-Prunus sargentii and P. densiflora-Quercus serrata community) and being in the process of natural selection(Q. serrata-P. densiflora and Q. aliena-P. densiflora community). In terms of vegetation management, P. densiflora forest having high potential of succession was needed to remove deciduous broadleaf trees in the sub-canopy layer and the community being in the process of succession was required to be pruning the branch in the canopy layer. Lastly, the community being in the process of natural selection was suggested to let it be in succession, since it is hard to be in the status of P. densiflora Forest.