• 자원리싸이클링
• /
• 제7권3호
• /
• pp.52-57
• /
• 1998

본 연구에서는 지렁이를 이용한 하수슬러지의 안정화시 타 폐기물과의 혼합 가능성을 알아보기위해 가축폐기물중 우분의 혼합비율을 달리하여 부숙에 따른 이화학적 성상변화를 살펴보고 이를 바탕으로 부숙시료에 대한 지렁이의 생존율, 증체율, 부화율 그리고 슬러지 섭취량 및 배설량 등을 평가하였다. 50일 부숙시킨 혼합시료의 이화학적 특성은 pH가 6.9~7.2, 또는 -22~174㎷, 알카리도는 270~1,150mc $CaCo_3$/L로 조사되었으며, 부숙시료에 대한 지렁이 입식실험에서 생존율은 30%, 20%, 10%의 우분혼합구에서 각각 88.3%, 83%, 63.7% 증체율은 각각 321%, 297%, 265%, 부화율은 각각 91%, 76.7%, 66.7%로 나타났다. 50일 동안의 섭취량과 분변토 발생량은 하수슬러지의 혼합비율이 높을수록 감소하는 경향이었으며, 지렁이 한 마리당 하루 섭취량과 분변토 발생량은 20%이상의 우분혼합구에서 각각 0.15~0.18g, 0.11~0.14g으로 나타났다. 이상의 결과로부터 하수슬러지의 vermistabilization 처리시 우분의 혼합비율은 20%이상이 요구되며 슬러지의 병합처리 가능성을 인정할 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.19.2-19.2
• /
• 2010

Printed electronics using printing process has broadened in all respects such as electrics (lighting, batteries, solar cells etc) as well as electronics (OLED, LCD, E-paper, transistor etc). Copper is considered to be a promising alternative to silver for printed electronics, due to very high conductivity at a low price. However, Copper is easily oxidized, and its oxide is non-conductive. This is the highest hurdle for making copper inks, since the heat and humidity that occurs during ink making and printing simply accelerates the oxidation process. A variety of chemical treatments including organic capping agents and metallic coating have been used to slow this oxidation. We have established synthetic conditions of copper nanoparticles (CuNPs) which are resistant to oxidation and average diameter of 20 to 50nm. Specific resistivity should be less than $4\;{\mu}{\Omega}{\cdot}cm$ when sintered at lower temperature than $250^{\circ}C$ to be able to apply to conductive patterns of FPCBs using ink-jet printing. Through this study, the parameters to control average diameter of CuNPs were found to be the introduction of additive agent, the feeding rate of reducing agent, and reaction temperature. The CuNPs with various average diameters (58, 40, 26, 20nm) could be synthesized by controlling these parameters. The dispersed solution of CuNPs with an average size of 20 nm was made with nonpolar solvent containing 3 wt% of binder, and then coated onto glass substrate. After sintering the coated substrates at $250^{\circ}C$ for 30 minutes in nitrogen atmosphere, metallic copper film resulted in a specific resistivity of $4.2\;{\mu}{\Omega}{\cdot}cm$.

• 폴리머
• /
• 제33권4호
• /
• pp.319-325
• /
• 2009

편광필름용 점착제를 합성하기 위해 아크릴 단량체를 사용하여 용액중합이 수행되었다. 사용된 아크릴 단량체는 2-ethylhexylacrylate, butylacrylate, acrylic acid였으며, 비율은 점착제의 유리전이온도 $-40^{\circ}C$에 맞추어 2-ethylhexylacrylate: butylacrylate: acrylic acid=25:50:3.5로 하였다. 중합된 점착제에 커플링제를 1 wt% 첨가하였을 때 점착제의 광투과율이 매우 증가하였다. 이러한 현상은 커플링제의 Si-O 결합이 액정셀에 대한 점착력을 향상시킨 결과임을 알 수 있었다. 가교제를 단량체 대비 0.5, 1.0, 1.5 wt% 첨가하였을 매 가교제의 함량이 증가할수록 초기점착력은 감소하고 응집력은 증가하였다. 접촉각 분석에서 가교제의 함량이 증가할수록 표면에너지가 커져 접촉각이 감소하였다. 내열성 측정에서 가교제의 증가나 온도변화에 관계없이 아크릴 점착제는 우수한 내열성을 보였으며 절단면의 관찰에서 가교제의 함량이 증가할수록 절단면이 매끄럽고 깨끗하였다. 종합적으로 점착제의 초기점착력, 응집력, 표면에너지, 절단면의 상태 등을 고려하여 적정 가교제의 투입량을 1.0 wt%로 확정하였다.

• International Journal of Automotive Technology
• /
• 제3권1호
• /
• pp.33-40
• /
• 2002

Increasingly stringent emission regulations of EU and CARB (California Air resource Board) require mandatory OBD (On Board Diagnostics) far the catalytic converters of a vehicle. It demands that MIL(Malfunction Indication Light) should be tuned on to inform the driver of catalytic converter failures. Currently dual oxygen sensor method Is widely used for the converter OBD. However, since it works only alter converter light-off, it has a serious limitation when applied to TLEV or more stringent emission regulations where more than 85% of total emission is coming out before converter light-off. In addition, a recent development in catalyst material. coating technology and additive catalysts leads to a much improved OSC (Oxygen Storage Capacity) after converter light-off, current methods are very difficult to determine levels of converter aging. Therefore, it is desired to develop an OSC detecting method before converter light-off to diagnose converter failures with higher reliability. In this study, OSCs of converters are measured by an absolute measuring method and a dynamic measuring method, and some of fundamental ideas are suggested about converter OBD before converter light-off. The converters are aged with two different aging methods; those are a furnace aging and an engine bench aging: to represent aging conditions in actual field applications. Dual oxygen sensor method at the lower temperature than light-off is also studied at a model gas bench with the converters. It is fecund that there is a certain point in temperature lower than light-off where difference due to aging level becomes maximum, thus a proper dynamic method to effectively monitor catalytic converters could be implemented fur the range lower than light-off temperatures. With this result, the aging level of converters is examined at an engine bench.

• 한국산업보건학회지
• /
• 제29권4호
• /
• pp.442-451
• /
• 2019

Objectives: The aim of this study was to review the reduction methods for ammonia (NH₃) and hydrogen sulfide (H₂S) exposure in livestock. Methods: By reviewing domestic and international research reports from Korea and China, reducing ammonia and hydrogen sulfide in livestock pens was analyzed in terms of ventilation, deodorant, and feed additives. In addition, exposure limits in Korea and China were examined through a comparison between 'TLV-TWA and STEL under the Industrial Safety and Health Act in Korea' and 'Management Standards for Air of Livestock Pens in China'. Results and Discussion: In order to effectively control hazardous gases and odors in livestock pens, the enhancement of natural ventilation or the addition of ventilation fans at the pollution source are being examined. Deodorants are used as adsorbents or masking deodorants. Additives to feed were zeolite powder, FeSO₄·7H₂O, enzymes, and microbial preparations. Use of feed additives was low-cost and had significant effects compared to other methods. Zeolite was the most commonly used in feed additive in Chinese cases and proved to be low-cost and effective for reducing harmful gases. Enzyme preparations were shown to stimulate the growth of livestock, but were expensive. Conclusions: This study reviewed and examined domestic and international research papers in Korea and China for reducing ammonia and hydrogen sulfide concentrations in livestock pens. More diverse research and the development of feed additives are needed.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.426-434
• /
• 2020

The performance characteristics of a lead acid battery are investigated with the content of Sodium Perborate Tetrahydrate (SPT, NaBO₃·4H₂O) in a positive plate active material. SPT, which reacts with water to form hydrogen peroxide, is applied as an additive in the positive plate active material to increase adhesion between the substrate (positive plate) and the active material; this phenomenon is caused by a chemical reaction on the surface of substrate. A positive plate with the increasing content of SPT is prepared to compare its properties. It is confirmed that the oxide layer increases at the interface between the substrate and the active material with increasing content of SPT; this is proven to be an oxide layer through EDS analysis. Battery performance is confirmed: when SPT content is 2.0 wt%, the charging acceptance and high rate discharge properties are improved. In addition, the lifetime performance according to the Standard of Battery Association of Japan (SBA) S0101 test is improved with increasing content of SPT.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.369-374
• /
• 2008

This study is an inorganic foaming ceramic by sol-gel reaction in order to overcome weak point of insulator using in construction equipment. We shall be able to confirm as the existing product substitute is possible result of this study. The solution where the silicate, the ceramic powder and the additive are included which makes foaming ceramic slurry, then the insulator made by used $CO_2$ Sol-Gel reaction. There being will be able to manufacture the insulator where the economical efficiency is excellent confirmed at the start product which is completed. The recording gel time decreases when the silicate will increase. Uses the hydrogen peroxide and fe make foam, when additionally surface preparation the fluorine resin, the water tolerance increases and will be able to complement the weak point of the silicate which omits in the water. The case which will use the loess powder with the research method which sees specially was environment-friendly product and according to appearing, the physical properties of nonflammability.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.49-57
• /
• 1999

In CLO2 delignification and bleaching process, formation of chlorate corresponds to a loss of 20-36% of the original CKO2 charge. Because chlorate is inactive and harmful to environmental, it will be of benefit to find methods that can reduce the formation of chlorate during chlorine dioxide bleaching. Chlorate is mainly formed by the reaction HCIO +ClO2 $\longrightarrow$H+ + Cl_ +ClO3-2 On the other hand, AOX in chlorine dioxide bleacing is formed also due to the in-situ produced hypochlorous acid. THus both AOX and chlorate could be reduced by addition of hypochlorous acid. Some paper son the reduction of AOX by additives appeared , but systematic data on chlorate reduction as well as pulp and effluent properties are not available. THus this paper of focused on the effects on the reduction of chlorate and chlorine dioxide bleachability. The additives, fulfamic a챵, AMSO, hydrogen peroxide, oxalic acid were found to eliminate chlorine selectively in chlorine and chlorine dioxide mixture.However, when they were added to bleaching process, sulfamic acid and DMSO showed significant reduction of chlorate formation but hydrogen peroxide and oxalic aicd did not, and significant amount ofhydrogen peroxide was found resided in the bleaching effluent , In addition, sulfamic acid and DMSO decreased the bleaching end ph values while hydrogen peroxide and oxalic acid did not, which also indicated that hydrogen peroxide and oxalic acid were ineffective. The difference might be ascribed to the competitives of hypochlorous acid with lignin, chlorite (CKO2) and additives. Sulfamic acid and DMSO showed better pulpbrightness development but less alkaline extraction efficiency than hydrogen peroxide , oxalic acid and control, which means that insitu hypochlorous acid contributes to the formation of new chromophore structures that can be easily eliminated by alkaline extraction. DMSO decreased the delignification ability of chlorine dioxide due to the elimination of hypochlorous acid, but sfulfamic acid did to because the chlroinated sulfamic acid had stable bleachability. In addition, sulfamic acid, and SMSO shwed decreased color and COD of bleaching effluents, hydrogen peroxide decreased effluent color but not COD content, and oxalic acid had no statistically significant effects. No significant decreases of pulp viocosity were found except for hydrogen peroxide. Based on our results , we suggest that the effectiveness of hydrogen peroxide on the reduction of AOX in literature might be explained by other mechanisms not due to the elimination of hypochlorous acid , but to the direct decomposition of AOX by hydrogen peroxide.

• 농업과학연구
• /
• 제9권1호
• /
• pp.250-259
• /
• 1982

낙엽송(落葉松)은 몇가지의 세멘트경화장해물질(硬化障害物質)을 함유(含有)하고 있기 때문에 목질(木質)세멘트판(板)의 제조(製造)에 부적합(不適合)한 수종(樹種)으로 알려져 왔다. 따라서 본(本) 연구(硏究)는 국산(國産) 낙엽송재(落葉松材)의 플레이크를 이용(利用)한 목질(木質)세멘트판(板) 재질(材質)에 미치는 전처리(前處理) 및 첨가제(添加劑)의 효과(效果)를 구명(究明)하고자 실시(實施)되었다. 보드의 재질(材質)을 향상(向上)시키기 위(爲)하여 냉수처리(冷水處理) 및 0.1, 0.5, 2.0%NaOH 용액(溶液)에 원료(原料)flake를 전처리(前處理) 시켰으며, $CaCl_2$, $Al_2Cl_3$ 및 $Na_2SiO_4$ 등(等)의 첨가제(添加劑)를 목질(木質)-세멘트혼합시(混合時)에 첨가(添加)시켰다. 본(本) 연구(硏究)에서 얻어진 결과(結果)는 다음과 같다. 1. 0.1%처리(處理)에서의 휨강도(强度)와 박리강도(剝離强度)는 냉수처리(冷水處理)에 비(比)하여 현저(顯著)한 강도증가효과(强度增加效果)를 나타냈다. 2. 휨강도(强度)는 0.1% 이상(以上)의 NaOH처리(處理)와 3% $CaCl_2$ (세멘트 대비(對比)) 첨가조건(添加條件)에서 JIS A-5417의 $60kg/cm^3$ 규격(規格)을 만족(滿足)시켰으며, 각(各) 첨가제(添加劑)는 공(共)히 0.5% 처리농도(處理濃度)에서 최대치(最大値)를 나타냈다. 3. 박리강도(剝離强度)는 0.1% 이상(以上)의 NaOH 처리(處理)에서 $CaCl_2$ 및 $Al_2Cl_3$의 첨가(添加)로 강도증가효과(强度增加效果)를 보였다. 4. NaOH처리농도(處理濃度)가 증가(增加)됨에 따라 팽창률(膨脹率)이 감소(減少)하여 치수안정상태(安定狀態)를 나타낸다. 5. 0.1% 이상(以上)의 NaOH처리(處理)에서 $Al_2Cl_3$, $CaCl_2$ 등(等)의 염화물(鹽化物)을 첨가(添加)시켰을 때 9.0~10.5%의 함수율(含水率)을 평형상태(平衡狀態)로 유지(維持)하였다. 6. 비중(比重)은 휨강도(强度) 및 박리강도(剝離强度) 등(等)의 강도적(强度的) 성질(性質)과 밀접(密接)한 관계(關係)가 있는 것으로 나타났다.

• 한국건설순환자원학회논문집
• /
• 제6권1호
• /
• pp.25-35
• /
• 2018

본 연구에서는 카올린과 플라이애시의 두 종류의 결합재를 혼합하여 알칼리 활성화시킨 후, 경화체의 강도 및 미세구조 분석을 수행하였다. 이를 위해, 경화된 시험체에 대해 압축강도, X선 회절분석(XRD), 열중량(TG) 분석 및 SEM/EDS 분석을 실시하였다. 카올린-플라이애시 혼합 결합재는 카올린 혼합에 관계없이 모든 경화체에 대해서 재령에 따라 압축강도가 증가하는 경향을 나타냈으며, 플라이애시 중량에 대한 카올린의 혼합비가 증가할수록 압축강도는 낮아지는 것으로 나타났다. XRD 분석 결과에서는 제작된 모든 시험체에 대해서 플라이애시 및 카올린의 원재료에 함유된 구성광물 이외에 새로운 결정질 물질 형성은 확인되지 않았지만, 이에 반해 TG 분석에서는 모든 시험체 내에서 N-A-S-H gel이 반응생성물로 형성된 것을 알 수 있었다. 모든 시험체들의 내부는 대체적으로 치밀하지 않은 것으로 나타났으며, 카올린 치환율에 따른 강도 발현의 차이가 있음에도 불구하고, 내부의 조직구조에서 뚜렷한 차이는 없는 것으로 나타났다. 본 연구에서 보여준 반응생성물의 Si/Al가 낮을수록 시험체의 강도가 상대적으로 높은, Si/Al와 강도와의 상관관계에 따라, 반응생성물의 Si/Al가 낮도록, 즉 사용되는 결합재의 $Al_2O_3$의 용해도를 높일 수 있는 화학적 첨가제가 고려된다면, 카올린-플라이애시 혼합 결합재의 강도 개선 효과를 기대할 수 있을 것으로 판단된다.