• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.292-297
• /
• 2017

${\beta}-SiAlON$, based on its high fracture toughness, good strength and low abrasion resistance, has been adopted in several industrial fields such as bearings, turbine blades and non-ferrous metal refractories. In general, ${\beta}-SiAlON$ is fabricated by reactive sintering using expensive $Si_3N_4$ and AlN as starting materials. On the other hand, in this study, a cheaper ${\beta}-SiAlON$ starting powder synthesized by SHS was employed to improve price competitiveness compared to that of the reactive sintering process. ${\beta}-SiAlON$ ceramics with various content of the sintering additive $Y_2O_3$ up to 7 wt% were fabricated by conventional pressureless sintering at $1800^{\circ}C$ for 2 to 8 h under $N_2$ pressure of 0.1 MPa. The specimen with 3 wt% $Y_2O_3$ exhibited the best mechanical properties: hardness of 14 GPa, biaxial strength of 830 MPa, fracture toughness of $5MPa{\cdot}m^{1/2}$ and wear rate of about $3{\times}10^{-6}mm^3/N{\cdot}m$.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2001.11a
• /
• pp.113-113
• /
• 2001

Stable MCF-7-ERE cells, in which pERE-Luc reporter gene has been stably integrated into the genome of the MCF-7 cells, were used to detect the estrogenic activity of various dietary flavonoids in either pure chemical or mixtures. Estradiol (E2) induced luciferase activity in dose dependent manner and this activity was inhibited by tamoxifen (Tam) concomitant treatment. A large series of flavonoids showed estrogenic activities, corresponding to EC5O values between 0.2 and 9 microM and their mixtures didn't show additive or synergistic effects. And we could find some structure and activity relationship. First, 4-methoxylation and catechol structure decreased estrogenic activities. Second, hydroxylation of 3 position reduced estrogenic effect. Third glycosides of flavonoids showed weak estrogenic activity or no activity. Interestingly, when tested at high concentrations, genistein, kaempferol, biochanin A and chrysin elicited luciferase induction higher than that of the maximum induction by estradiol. And these effects of genistein and kaempferol could not be fully inhibited with tamoxifen

• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.173-176
• /
• 2006

The effect of enzymatically hydrolyzed vital wheat gluten (EHG) on dough mixing and the baking quality of wheat flour frozen dough was examined. Three different proteases, pepsin, trypsin, and chymotrypsin, were tested individually, sequentially paired, or in combination of all three enzymes. Addition of 1% EHG produced no observable effect on the mixing properties of wheat flour dough. However, addition of 2.5% pepsin-hydrolyzed gluten decreased the mixing tolerance of the wheat flour, and 1% trypsin-hydrolyzed gluten increased the loaf volume of both frozen and non-frozen dough. This finding suggests that trypsin-hydrolyzed vital wheat gluten may serve as a baking additive in replacement for $KBrO_3$ to improve frozen dough quality.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.196-201
• /
• 2010

The influence of red lead($Pb_3O_4$) to curing and formation reaction properties when it was added in positive material of lead acid battery for vehicle use has been investigated. At the results, it was confirmed that the addition of red lead led 4BS crystal size to be smaller and increased the rates of 4BS formation and Pb consumption. Consequently the curing time was shortened to half compared with that of red lead-free one. In addition to this, the lead acid battery prepared by adding red lead showed 14% higher efficiency at the life cycle test than that without red lead.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.229-236
• /
• 2014

In this study, the method to improve the electrochemical performance of $LiFePO_4$ by carbon coating and morphology control into porous structure was studied. The synthesis of $LiFePO_4$ was done by coprecipitation method by two step procedure. In the first step $FePO_4$ precursor was synthesized by coprecipitation method, followed by impregnation of lithium into the precursor at $750^{\circ}C$. The carbon coating was done by both physical and chemical coating processes. Using the physical coating process, the amount of coating layer was 6% and the capacity achieved was 125 mAh/g. In case of chemical coating process, the active material delivered 130~140 mAh/g, which is about 40% improvement of delivered capacity compared to uncoated $LiFePO_4$. For the morphology control into porous structure, we added nano particles of $Al_2O_3$ or $SiO_2$ into the active materials and formed the nanocomposite of ($Al_2O_3$ or $SiO_2$)/$LiFePO_4$. Between them, $SiO_2/LiFePO_4$ porous nanocomposite showed larger capacity of 132 mAh/g.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.153-153
• /
• 2016

Aluminum alloys have poor corrosion resistance compared to the pure aluminum due to the additive elements. Thus, anodizing technology artificially generating thick oxide films are widely applied nowadays in order to improve corrosion resistance. Anodizing is one of the surface modification techniques, which is commercially applicable to a large surface at a low price. However, most studies up to now have focused on its commercialization with hardly any research on the assessment and improvement of the physical characteristics of the anodized films. Therefore, this study aims to select the optimum temperature of sulfuric electrolyte to perform excellent corrosion resistance in the harsh marine environment through electrochemical experiment in the sea water upon generating porous films by variating the temperatures of sulfuric electrolyte. To fabricate uniform porous film of 5083 aluminum alloy, we conducted electro-polishing under the 25 V at $5^{\circ}C$ condition for three minutes using mixed solution of ethanol (95 %) and perchloric (70 %) acid with volume ratio of 4:1. Afterward, the first step surface modification was performed using sulfuric acid as an electrolyte where the electrolyte concentration was maintained at 10 vol.% by using a jacketed beaker. For anode, 5083 aluminum alloy with thickness of 5 mm and size of $2cm{\times}2cm$ was used, while platinum electrode was used for cathode. The distance between the two was maintained at 3 cm. Afterward, the irregular oxide film that was created in the first step surface modification was removed. For the second step surface modification process (identical to the step 1), etching was performed using mixture of chromic acid (1.8 wt.%) and phosphoric acid (6 wt.%) at $60^{\circ}C$ temperature for 30 minutes. Anodic polarization test was performed at scan rate of 2 mV/s up to +3.0 V vs open circuit potential in natural seawater. Surface morphology was compared using 3D analysis microscope to observe the damage behavior. As a result, the case of surface modification presented a significantly lower corrosion current density than that without modification, indicating excellent corrosion resistance.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.538-542
• /
• 2007

Polymeric electrodes for lead ion based on N,N'-bis-thiophen-2-ylmethylene-pyridine-2,6-diamine as an ion carrier were prepared. The membrane electrode (m-3) containing o-NPOE as a plasticizer and 50 mol% additive of ionophore gives an excellent Nernstian response (29.59 mV/decade) and the limit of detection of ?log a (M) = 5.74 to Pb2+ in Pb(NO3)2 solution at room temperature. The prepared electrode provided good sensitivity and outstanding selectivity and response for Pb2+ over a wide variety of other metal ions in pH 7.0 buffer solutions. The good sensitivity and selectivity towards lead ion are attributed to the strong complexation of lead ion to N,N'-bis-thiophen-2-ylmethylene-pyridine-2,6-diamine which has geometrically the proper cavity to coordinate to the ligand.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.2
• /
• pp.62-66
• /
• 2016

In this study, it was investigated that characteristic of crack-self-healing of hot-pressed SiC. SiC ceramics was sintered with $Al_2O_3$ and $Y_2O_3$ sintering additive by hot press. Sintering was performed in hot-press furnace in flowing argon (Ar), holding for 3 hr under $1950^{\circ}C$ and 50 MPa. The sintered SiC was machined into 3-point bending strength specimen of $3{\times}4{\times}40mm$, and introduced pre-crack by Vickers indentation at 49.6 N. Specimens were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), 3-point bending strength after heat treatment at $1200{\sim}1400^{\circ}C$ for 1~10 hr. The best crack-self-healing ability was achieved 770 MPa 3-point bending strength by heat treatment at $1300^{\circ}C$ for 5 hr.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.7-11
• /
• 2003

Photoelectrochemical response and electrochemical impedance behavior was investigated for passive film formed on sputter-deposited Cr alloy in $0.1kmol{\cdot}m^{-3}$. Photoelectrochemical action spectrum could be separated into two components, which were considered to be derived from $Cr_2O_3$ ($E_g\sim3.6eV$) and $ Cr(OH)_3 $ ($E_g\sim2.5eV$). The band gap energy, $E_g$, of each component was almost constant for various applied potentials. polarization periods and alloying additives. The photoelectrochemical response showed negative photo current for most potentials in the passive region. Therefore, the photo current apparently exhibited p-typesemiconductor behavior. On the other hand, Mort-Schottky plot of the capacitance showed positive slope, which means that passive film formed on Cr alloy has n-type semiconductor property. These apparently conflicting results are rationally explained assuming that the passive film on Cr alloy formed in the acid solution has n-type semiconductor property with a fairly deep donor level in the band gap and forms an accumulation layer in the most of potential region in the passive state.

• Journal of Life Science
• /
• v.24 no.6
• /
• pp.595-602
• /
• 2014

Styela Clava tunic (SCT) has found some applications in many areas of medical treatment including as an anti-inflammatory compound, a wound healing film, in guided bone regeneration, and as a food additive. The protective effect of SCT aqueous extract (AE-SCT) on cell death induced by $H_2O_2$ treatment was investigated by measuring the changes in cell viability in HepG2 cells after AE-SCT treatment. High concentrations of antioxidant compounds including flavonoids (3.3 mg/g) and phenolics (32.3 mg/g) were detected in AE-SCT but no significant cytotoxicity was observed in HepG2 cells treated with AE-SCT. The viability of HepG2 cells was also not changed by treatment with different concentrations of AE-SCT after $H_2O_2$ treatment. However, cell viability was significantly increased in cells treated with three different concentrations of AE-SCT before $H_2O_2$ treatment. The greatest increase in cell viability was observed in the group treated with $50{\mu}g/ml$ AE-SCT, when compared with vehicle-treated group. FACS and DAPI staining analysis indicated that the decrease in number of dead cells was dependent on the concentration of AE-SCT. Alterations in the Bax/Bcl-2 ratio after $H_2O_2$ treatment were significantly restored by treatment with different concentrations of AE-SCT. These results indicate that AE-SCT, which contains high levels of antioxidants, may protect cells against death induced by $H_2O_2$ treatment.