• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.172-176
• /
• 1995

$YBa_2Cu_3O_{7-y}$ thin films have been prepared on MgO(100)substrates placed on-axis to the target by dc magnetron sputtering in a variety of oxygen/argon gas pressures with different substrate-target distances. We found that films with the c-axis perpendicular to the substrate deposited in an optimally high gas pressure with on-axis substrate-target configuration do. Increasing the substrate-target distance was found to be effetive in reducing the resputtering effect and enhancing superconductivity of films, but not so much $\alpha$-and c-axis growth of YMCO films on MgO substrates. Dependences of the Tc, the rationj of resistances at 300K and 100K, and the X-ray diffraction pattern on the gas pressure and the substrate target distance are described.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.26-29
• /
• 1999

Superconducting $YBa_{2}$$Cu_{3}$ $O_{7-x}$(YBCO) thin films were deposited on MgO(100) substrates using a hollow cathode discharge sputtering system. Influence of the sputtering conditions such as substrate temperature and discharge sputtering gas pressure on electrical and structural properties were investigated. It was found that YBCO thin films with zero resistance temperature higher than 85 K were obtained to the pressure 200 mToorr(Ar/O2=0.9), substrate temperature of $760^{\circ}C$, and target-substrate distance of 10 mm during film deposition. Homogeneous large area YBCO films with 2 inch diameter were also sucessfully fabricated by this method.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.555-560
• /
• 1990

High temperature superconducting films of $YBa_2Cu_3O_{7-x}$ were fabricated on the (100) single crystal faces of YSZ (yttria stabilized zirconia) and SrTi$O_3$ by aerosol spray using ultrasonic atomization. The superconducting phase was formed by a three-step process: (a) spraying of a stoichiometric solution of nitrates of yttrium, barium, and copper on heated substrates kept at 250$^{\circ}C$, (b) preheating of the sprayed films in air at 550$^{\circ}C$, and (e) sintering of the films in flowing oxygen at 950$^{\circ}C$, followed by furnace cooling. Resistances of the films were measured by the dc four-probe method and superconductivity was confirmed above the liquid nitrogen temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.349-351
• /
• 2011

The formation of oxide superconducting phase fabrication of superconducting wire materials and fabrication of precise superconducting material were studied for developing superconductor application technique. The $ZrO_2$ addition reduced the particle size $BaZrO_3$ trapped in the matrix after the sintering growth. The added $ZrO_2$ was converted to fine particles of $BaZrO_3$ which is the conventional sintering temperature for YBaCuO, $Y_2Ba_1Cu_1O_5$ and CuO are formed as by products of the reaction between $ZrO_2$ and YBaCuO phase. The formation of highly $BaZrO_3$ particle appears to be responsible for the refinement of $BaZrO_3$ phase after the citric acid sintering process.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.221-227
• /
• 1989

To investigate the development and densification YBa2Cu3O7-x(1-2-3) superconducting phase, the 1-2-3 phase powders have been prepared by citrate and nitrate processes with changing calcination temperature. Nearly pure 1-2-3 phase peaks have been obtained by calcining the precursor in air at 90$0^{\circ}C$ for 2.5h in citrate process but at 95$0^{\circ}C$ for 2.5h in nitrate process. The sintering density of citrate derived sample calcined at 80$0^{\circ}C$ has been about 4% higher than that calcined at 90$0^{\circ}C$, although the compacting density has been lower at 80$0^{\circ}C$ calcination. This can be explained that the 1-2-3 phase particles formed at 80$0^{\circ}C$ have reactive sub-micron size which has good sinterbililty.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1483-1490
• /
• 1994

YBa2Cu3Ox-Ag(YBCO-Ag) thick films were fabricated on the zirconia substrate by a screen printing method. The starting powder was a mixture of YBCO, prepared by a coprecipitation in oxalic acid, and Ag2O. The influence of heat treatment conditions on properties of thick films was investigated. It was observed that Jc of thick films was directly proportional to the orientation factor of thick films and the optimimum preparation condition was the heat treatment of thick films at 100$0^{\circ}C$ for 3 min in O2. The improvement of Jc by the addition of Ag was considered as a result of the suppression of microcracks in the films.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.278-283
• /
• 1992

123 초전도체에 마그네틱 모멘트가 큰 Ni불순물을 도핑하여 제작한 $Y_{1}$ Ba(C $u_{2.9}$ $N_{0.1}$) $O_{7-{\delta}}$ 초전도체의 X-ray diffraction pattern, susceptibility, 온도변화등에 따른 전류-전압관계, 임계온도 등에 대하여 연구하였다. 제작된 시료는 매우 뚜렷한 orthorhombic 피크를 가진 123상을 나타내고 있었다. N=0.1의 시료에서는 적은 양의 Ni 불순물과 단면적인 무정형상태의 잘 반응된 YBa(Cu, Ni)$_{3}$ $O_{7-{\delta}}$의 orthorhombic구조를 나타내고 있다. 전반적인 실험 결과로 부터 Ni는 Y-Ba-Cu-O 초전도 시스템에서 초전도에 중요한 역할을 담당하지 않는다는 결론을 얻었다.얻었다.다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.225-228
• /
• 1997

YBa$_2$Cu$_3$O$_{x}$ samples with different amounts of $Y_2$BaCuO$_{5}$ were prepared by MPMG (Melt Powder Melt Growth) method. The effects on the size of initial particles and Ag addition for $Y_2$BaCuO$_{5}$ distribution in YBa$_2$Cu$_3$O$_{x}$ were invesgated. The samples prepared by the melting process usually have large grains up to several ㎣ and precipitates of $Y_2$BaCuO$_{5}$. The distribution of the $Y_2$BaCuO$_{5}$ particles in the samples depends on the size of initial particles and the amounts of Ag addition.Ag addition.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.589-594
• /
• 1997

Superconducting $YBa_2Cu_3O_y$ thin films were prepared at the deposition temperature of $650^{\circ}C$ under oxygen partial pressure of 0.0126 Torr on Si(111) and SrTiO3(100) substrates by chemical vapor deposition technique using $\beta$-diketonates of Y, Ba and Cu as source materials. The thin film fabricated on $SrTiO_3(100)$ had a $T_{c,onset}$ of 91K and $T_{c.0}$ of 87K. The thin film prepared on Si(111) had a $T_{c,onset}$ of 91K but didn't have a $T_{c.0}$ at liquid nitrogen boiling point(77.3K). Dense and two-dimensionally well alligned microstructure was developed for the film deposited on $SrTiO_3(100)$ substrate whereas a relatively porous and randomly distributed microstructure was developed for the film prepared on Si(111) substrate.

• Progress in Superconductivity and Cryogenics
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1999

The microstructures of top seed mult processde $\textrm{YBa}_2\textrm{Cu}_3\textrm{O}_7$.$\delta$ single crystal were studied. Although shape of the seed was not faceted. the growth shape of Y123 single crystal was faceted. It was observed that Y211 phases were trapped in specific spaces of the faceted region. From the microstructural investigation. it was suggested that the segregation of Y211 is due to the difference of growth rates in crystal direction. When a single crystal was grown by the single seed with stepped multi surfaces. a microstrue was grown from multi-seed. The microstructure show the possibility of multi-seed growth. Corn kernel like structure without Y211 phase was observed and seemed to be formed by the diffusion reaction between Y211 phase in crystal and liquid wetted on the crystal. the diagonal line on Y123 crystal was observed that it was formed by the corn kernel like structure.