• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.8
• /
• pp.1063-1067
• /
• 1995

The superconducting properties of YBa$_{2}$Cu$_{3}$$O_{7-x}$(YBaCuO) thin films prepared by laser ablation have been investigated. The x-ray diffraction patterns and surface morphology of the films were substantially different from one another. The compositional ratios of YBaCuO films were controlled by the conditions of the target-substrate distance. The YBaCuO films manufactured on MgO(100) substrate were indicated T$_{c}$(zero)=91.2 K, T$_{c}$(onset)=93 K, and J$_{c}$=3.5*10$^{5}$ A/cm$^{2}$(at 77.3K). The optimum conditions were found to be a substrate temperature of 710 .deg. C, a energy density of 2 J/cm$^{2}$, and a target-substrate distance of 60 mm in an oxygen partial pressure of 200 mTorr.0 mTorr.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.6-12
• /
• 1995

High Tc superconducting YBa$_{2}$Cu$_{3}$$O_{7-x}$ thin films were prepared on various substrates by off-axis rf magnetron sputtering method to examine the substrate effects on the film structure and its R-T characteristics. The SEM analysis showed that the surface morphology of the grown YBa$_{2}$Cu$_{3}$O.sub 7-x/, film has different characteristic structure with different substrate used. The film on (100) SrTiO$_{3}$ substrate has critical current density of 3*10$^{5}$ A/cm$^{2}$ at 77K under zero magnetic field. The X-ray diffraction measurements revealed that the films on (100) SrTiO$_{3}$ substrate have mixed a-axis and c-axis normal to the substrate surface and the films on (100) MgO and ZrO$_{2}$/sapphire substrates have c-axis normal orientation to the substrate surface. However, YBa$_{2}$Cu$_{3}$$O_{7-x}$ films on (100) sapphire substrates showed no preferential orientation.ion.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.313-320
• /
• 1996

We have fabricated an in-plane aligned a-axis oriented YBa2Cu3O7-x (a-YBCO) thin film on a LaSrGaO4(100) substrate with a PrBa2Cu3O7-x(PBCO) template layer by two step plused laser deposition using 308 nm XeCl excimer laser. A YBCO layer and PBCO layer grown at low temperatures were used as template layers. We have investigated the effect of the deposition temperature of template layers on the superconducting and struc-tural properties of in-plane aligned a-YBCO thin films. An optimal deposition temperature of the PBCO template layers was 630. In-plane aligned a-YBCO thin films showed an anisotropy ratio in resistivity of 11.5 and a zero resistance temperature of 88 K.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1995.11a
• /
• pp.74-75
• /
• 1995

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1296-1299
• /
• 2012

$YBa_2Cu_3O_{7-x}$ thin films were fabricated by the spin-coating method on $SiO_2$/Si substrate using an alkoxide-based sol-gel method. The structural and electrical properties were investigated for various 1st annealing temperature. Due to the formation of the polycrystalline single phase, synthesis temperature was observed at around $720^{\circ}C-800^{\circ}C$. $YBa_2Cu_3O_{7-x}$ thin films with the 1st annealing temperature of $450^{\circ}C{\sim}500^{\circ}C$ showed the single XRD patterns without the second phase, such as $YBa_2Cu_4O_8$. The thickness of films was approximately $0.23{\mu}m{\sim}0.27{\mu}m$. Aerage grain size, resistance and temperature coefficient of resistance (TCR) of $YBa_2Cu_3O_{7-x}$ thin films with the 1st annealing temperature of $500^{\circ}C$ were $0.27{\mu}m$, $59.7M{\Omega}$ and -3.7 %/K, respecvitely.

• Journal of the Korean Ceramic Society
• /
• v.28 no.3
• /
• pp.243-251
• /
• 1991

High-Tc YBa2Cu3O7-x superconducting thin films have been prepared by single-target off-axis RF magnetron sputtering. Optimal ratio of Y : Ba : Cu of the single-target was determined as 1 : 1.65 : 3.35 in order to obtain the stoichiometric films. Tc, crystalline phase, and microstructures of the surface and cross-section of the ex-situ YBa2Cu3O7-x thin films on MgO(100) had a Tc, zero of 80K, and the films on LaAlO3/Si had a Tc, on-set of 90 K and a Tc, zero of 70 K.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.55-55
• /
• 1994

• Korean Journal of Crystallography
• /
• v.5 no.2
• /
• pp.85-92
• /
• 1994

Ferroelectric Bi4Ti3012 thin films have been grown on LaAlO(001) by Pulsed-laser deposition. Phase formation and structural films prepared of the films prepared at varigus deposition temperatures are investigated using x-ray diffraction The film grown at 740℃ shows epitaxial growth behavior with c-akis normal to the substrate. N2tBmstiucCures of Bi4Ti3012/YBa2Cu307-x/LaAIO3(001) have been in-situ grown. Even though the a-and b-axes of the Yba2Cu307-x layer show epitaxial growth behavior.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.312-320
• /
• 1994

Effect of the laser shot number on the particulates density of the pulsed laser deposited YBa2Cu3O7-x thin films and the laser irradiated surface morphology of the YBa2Cu3O7-x bulk target have been investigated. Until 100 laser shots of cumulative irradiation, the films has the particulates density of ~103 mm-2. However, after 100 laser shots, the density was increased more than 10 times. This results has been explained by the change of particulate ejection path with the development of conical structure at the target surface.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.05a
• /
• pp.22-23
• /
• 1994