• 제목/요약/키워드: $YBa_2$$Cu_3$$O_7$

검색결과 375건 처리시간 0.023초

EPD Superconductor Film with Submicron YBCO on Ag Alloy

  • Soh, Dea-Wha;Fan, Zhanguo;Jeon, Yong-Woo
    • 동굴
    • /
    • 제76호
    • /
    • pp.49-55
    • /
    • 2006
  • The submicron $YBa_2Cu_3O_x$ powder was prepared by the sol-gel method. The particle size is distributed from 0.2 to 1.0 ${\mu}m$, which benefits to eliminate the micro-cracks formed in the $YBa_2Cu_3O_x$ films deposited by electrophoresis. The powder was single phase of $YBa_2Cu_3O_x$ examined by X-ray diffraction. In the sol-gel process the citrate gel was formed from citric acid and nitrate solution of $Y_2O_3$, $Ba(NO_3)_2$ and CuO. When pH values were adjusted to 6.4-6.7, $Ba(NO_3)_2$ could be dissolved in the citrate solution completely. Appropriate evaporative temperature of the sol-gel formation is discussed. Acetone is used as electrophoreticsolution, in which some water and iodine (0.2 g/1) and polyethylene glycol (2 vol. %) are added. The concentrations of $YBa_2Cu_3O_x$ powders is 20g/l. The thickness of deposited film could be more than 50 ${\mu}m$ in 3 minutes of depositing time. The most EPD films could be 90K zero resistance and the Jc values were over 1000A/cm2 (0 H, 77 K).

Flux법에 의한 초전도체 YBa2Cu3O7-x 단결정 육성 (Growth of Superconductor YBa2Cu3O7-x Single Crystal by Flux Method)

  • 오근호;김호건;명중재
    • 한국세라믹학회지
    • /
    • 제27권1호
    • /
    • pp.48-54
    • /
    • 1990
  • YBa2Cu3O7-x(=YBCO) single crystals were grown by flux method and the growing process of crystals was investigated. YBCO and 3BaO-7CuO composition powders were mixed by the ratio of 25 : 75(wt%), and the mixtures were melted at 105$0^{\circ}C$ in a electric furnace with no temperature-gradient. Then the melt was cooled at a rate 2-1$0^{\circ}C$/h in the above furnace. YBCO single crystal plate with average size of $1.5\times$2.0$\times$0.1㎣ were obtained in the cavities between crucible and solidified ingot, and the single crystals were oriented to <001> direction. The ingots of flux parts were analyzed by XRD and EDS for the purpose of presuming the growing process of the crystals. It was assumed that the divorced eutectic reaction, by which YBCO crystals were grown first and then BaCuO2 and CuO crystals, occured in the case of cooling rate faster than 2$^{\circ}C$/h. When the cooling rate was 2$^{\circ}C$/h, it was assumed that quasi-equilibrium eutectic reaction occured, so that YBCO, BaCuO2 and CuO crystals were grown at the same time.

  • PDF

미립액상 분말에 의한 $YBa_{2}Cu_{3}O_{x}$ 초전도체의 PECVD 증착법 (A study on the $YBa_{2}Cu_{3}O_{x}$ phase deposition by liquid aerosol PECVD)

  • 정용선;오근호
    • 한국결정성장학회지
    • /
    • 제6권2호
    • /
    • pp.229-237
    • /
    • 1996
  • 액상의 미립자를 이용하여 저온 플라즈마 반응로 안에서 $YBa_{2}Cu_{3}O_{x}$ 초전도체상을 MgO 단결정 위에 in-situ 증착하였다. 금속화합물의 용해도, 분해온도와 용매의 증기압이 이공정 방법에서 중용한 인자로 나타났으며, 초전도체상의 증착실험 조건은 산소분압이 0.3에서 2.7 kPa, 증착온도가 $800^{\circ}C$에서 $940^{\circ}C$까지이었다. 초전도체상을 위한 최적의 증착조건은 CuO 상전이선에 근접하게 나타났다.

  • PDF

YBaCuO계 초전도체 합성 및 특성에 미치는 분쇄효과 (Effect of Grinding on Preparation of YBaCuO-System and its Superconductivity)

  • 류호진
    • 공업화학
    • /
    • 제8권5호
    • /
    • pp.811-815
    • /
    • 1997
  • 본 연구에서는 고상반응에 의한 $YBa_2Cu_3O_{7-y}$계 고온 초전도체의 결정구조 및 초전도 특성에 미치는 원료분말의 분쇄효과를 명백히 할 목적으로 $Y_2O_3$, $BaCO_3$, CuO의 혼합물을 유성볼밀을 사용하여 건식혼합분쇄를 행하였다. 얻어진 분쇄산물의 비표면적은 60분 분쇄할 때까지 증가하며. 그 후 분쇄시간이 증가함에 따라 감소하는 경향을 보였다. 소결체의 임계온도는 분쇄시간에 의존하지 않고, 약 90K로 일정한 값을 나타내었다. 한편, 소결체의 임계전류밀도는 분쇄시간에 크게 의존하였으며, 60분 분쇄한 소결체에서 최대치 $150A/cm^2$를 나타내었다.

  • PDF

EPR Study of the High $T_c$ Superconductor $YBa_2$$Cu_3$$O_{7-y}$ Doped with Palladium or Zinc

  • Hag Chun Kim;Hyunsoo So;Ho Keun Lee
    • Bulletin of the Korean Chemical Society
    • /
    • 제12권5호
    • /
    • pp.499-504
    • /
    • 1991
  • EPR spectra of the high $T_c$ superconductor $YBa_2Cu_3O_{7-y}$ (YBCO) doped with $Pd^{2+} or Zn^{2+}$ have been measured at several temperatures and dopant concentrations. The spectral intensity of $YBa_2({Cu_{1-x}}{Pd_x})_3O_{7-y}$ is proportional to the dopant concentration. The behavior of $YBa_2(Cu_{1-x}Zn_x)_3O_{7-y}$ is quite different: the spectral intensity remains almost constant up to x=0.10 and then increases rapidly above x=0.10. The results are interpreted in terms of localized and antiferromagnetically spin-paired d holes in both CuO chain and planes. The $Pd_{2+}$ ion substitutes on the CuO chain consisting of "CuOCu dimers", and a $Cu_{2+}$ ion with an unpaired spin is gene rated for each $Pd_{2+}$ ion substituted. On the other hand, $Zn_{2+}$ substitutes on the CuO planes, and all or most of the spins in the two-dimensional plane manage to pair up in the region of low dopant concentration. When the dopant concentration exceeds a certain limit, it becomes more difficult for the spins to find partners, and the number of unpaired spins increases rapidly with increasing dopant concentration. The $Zn_{2+}$ ion is more effective than the $Pd_{2+}$ ion in suppressing the superconductivity of YBCO. This is attributed to the fact that $Zn_{2+}$ substitutes on the CuO planes which are mainly responsible for the superconductivity, while $Pd_{2+}$ substitutes on the CuO chain which is of secondary importance in the superconductivity.

Superconductivity in Fluorinated $YBa_2Cu_3O_{6+x}$

  • Lee, Cheol-Eui;D, White;P.K, Davies
    • Journal of Magnetics
    • /
    • 제1권2호
    • /
    • pp.57-59
    • /
    • 1996
  • The YBa$_2$Cu$_3$O6+xstructures have been fluorinated by a gas phase exchange technique, and 19F NMR was used to identify the structural fluorine. Magnetic susceptibility measurements showed that the fluorination turned a marginally nonsuperconducting sample into a 40 K superconductor, as well as that it raised the onset of the superconducting transition of the 60 K superconductor YBa$_2$Cu$_3$O6.7 to about 100 K.

  • PDF