Anatase $TiO_2$에 각기 다른 텅스텐(W) 함유원료와 제조방법을 적용하여 $WO_3$ 촉매가 첨가된 SCR(selective catalytic reduction)용 분말을 합성하였으며, W 촉매 첨가가 합성분말의 상합성 및 SCR 촉매능에 미치는 영향에 대해 연구하였다. 촉매의 지지체인 $TiO_2$는 침전법으로 anatase 상으로 합성되었으며, anatase에서 고온상인 rutile로의 상전이 온도는 $1200^{\circ}C$였으나, $WO_3$를 10 wt% 첨가할 경우 이 상전이 온도는 $900^{\circ}C$로 낮아졌다. 건식으로 $WO_3$ 분말을 직접 첨가하여 $WO_3(10wt%)/TiO_2$를 제조한 경우 $350^{\circ}C$에서 $NO_X$ 제거 촉매능이 최고점에 이르나 온도증가에 따라 그 효율이 상당히 감소하였다. 암모늄-메타-텅스테이트를 습식으로 첨가하여 제조한 경우, 보다 고온인 $450^{\circ}C$에서 촉매능이 최고점에 이르렀으며 온도에 따른 효율감소 폭도 적었다. 이와 같은 경향은 $WO_3$와 $V_2O_5$를 동시 첨가하여 제조한 $V_2O_5(5wt%)-WO_3(10wt%)/TiO_2$ 촉매에서도 나타났다. 즉, 암모늄-메타-텅스테이트를 습식으로 첨가한 경우, $WO_3$를 직접 첨가한 경우에 비해 넓은 온도범위($300^{\circ}C{\sim}500^{\circ}C$)에 걸쳐 90 %에 이상의 우수한 $NO_X$ 변환효율을 보였다.
에틸렌 이량화반응을 위한 일련의 $NiO-ZrO_2/WO_3$촉매를 염화니켈-옥시염화 질코니움 수용액을 공침시키고 ammonium metatungstate용액으로 함침시킨 다음 공기 중에서 소성하여 제조하였다. X-선 회절과 DSC로부터 얻은 결과를 근거로 하면 $ZrO_2$에 NiO 및 $WO_3$를 첨가하면 $ZrO_2$와 첨가된 산화물과의 상호작용으로 $ZrO_2$의 무정형에서 tetragonal phase로의 상전이 온도가 더 높은 온도로 이동되었다. $WO_3$가 첨가되지 않은 $NiO-ZrO_2$는 에틸렌 이량화반응에 전혀 촉매 활성을 나타내지 아니하였으나 $WO_3$가 첨가된 $NiO-ZrO_2/WO_3$촉매는 실온에서도 높은 활성을 나타내었다. 이와 같은 $NiO-ZrO_2/WO_3$의 높은 촉매활성은 $WO_3$의 유도효과에 의한 산세기의 증가와 밀접한 관련이 있었다.
In this work, all solid-state thin film supercapacitor(TFSC) was fabricated using tungsten trioxide (WO$_3$) with a structure WO$_3$/LiPON/WO$_3$/Pt/TiO$_2$/Si (substrate). After TiO$_2$ was deposited on Si(100) wafer by d.c. reactive sputtering, the Pt current collector films were grown on TiO$_2$glue layer without breaking vacuum by d.c. sputtering. Fabrication conditions of WO$_3$ thin film were such that substrate temperature, working pressure, gas ratio of $O_2$/Ar and r.f. power were room temperature, 5 mTorr, 20% (O$_2$(8sccm)/Ar(32sccm)) and 200W, respectively. LiPON electrolyte film were grown on the WO$_3$ film using r.f. magnetron sputtering at room temperature. The XRD pattern of the as-deposited WO$_3$ thin film were shown no crystalline peak (amorphous). The SEM image of as-deposited WO$_3$ thin film showed that the surface is smooth and uniform. The capacitiy of as-fabricated TFSC was 0$\times$10$^{-2}$ F/$\textrm{cm}^2$-${\mu}{\textrm}{m}$.
$WO_{3}$ 모물질로 하여 NOx 검지센서를 제조하여 전기적 특성과 가스감지특성을 알아 보았다. $SnO_{2}$와 $TiO_{2}$를 포함한 $WO_{3}$ 후막은 동작온도 $400^{\circ}C$에서 순수한 $WO_{3}$ 후막보다 NOx가스에 대한 뛰어난 감도와 가스 흡탈착 특성을 보였다. $TiO_{2}-WO_{3}$ 후막에 Ru와 Au와 같은 귀금속 촉매를 특별히 첨가하여 제작된 센서에서는 NOx 가스에 대한 감도, 회복 속도 및 선택도 등을 더욱 개선되었다.
마이크로 에멀젼 방법으로 CaWO4 결정을 합성하였다. CTAB에 대한 H2O의 몰랄 농도비(w)를 변 화시켜서 다양한 크기와 형태의 CaWO4를 얻었다. w=5와 w=10일 때 각각 100 nm와 500 nm 길이의 타원형 CaWO4 결정을 얻었다. w=20일 때는 1 μm의 막대형 CaWO4 결정을 얻었다. w=30에서는 길이가 약 2~3 μm인 구형의 CaWO4 결정을 얻었다. CTAB에 대한 H2O의 몰랄 농도비가 증가 할수록 응집에 의해서 CaWO4 결정 의 모양은 타원형에서 막대형태를 거쳐서 구형으로 변했다.
In this paper, the performance of Pt/$WO_3$ and Pt-$WO_3$ electrodes was studied for the direct methanol fuel cell. The characteristics of Pt/$WO_3$ electrode which was prepared by using electrodeposition method was tested with half-cell experiment. The characteristics of Pt-$WO_3$/C electrode which was Prepared by using freeze-drying method was tested with a single cell experiment. The performance of DMFC single cell which was prepared by Pt-$WO_3/C$ and Pt/C showed a current density of $32mA/cm^2$ at $110^{\circ}C$ & 0.3V(0.5mg Pt/$cm^2$).
The gas sensor is essential to monitoring dangerous gases in our environment. Metal oxide (MO) gas sensors are primarily utilized for flammable, toxic and organic gases and $O_3$ because of their high sensitivity, high response and high stability. Tungsten oxides ($WO_3$) have versatile applications, particularly for gas sensor applications because of the wide bandgap and stability of $WO_3$. Nanosize $WO_3$ are synthesized using the hydrothermal method. As-prepared $WO_3$ nanopowders are in the form of nanorods and nanorulers. The crystal structure is hexagonal tungsten bronze ($MxWO_3$, x =< 0.33), characterized as a tunnel structure that accommodates alkali ions and the phase stabilizer. A gas detection test reveals that $WO_3$ can detect acetone, butanol, ethanol, and gasoline. This is the first study to report this capability of $WO_3$.
본 연구에서는 WO3 광촉매의 활성을 증대시키기 위하여 불소 도핑을 수행하고, 메틸렌블루 염료를 이용하여 광분해 특성을 고찰하였다. 본 연구를 통해 제조된 WO3-xFx 광촉매는 WCl6 전구체로부터 WO3 광촉매를 제조하기 위한 소결과정 중에 기상 불소화 방법을 이용하여 제조하였다. 불소 도핑 후 WO3 광촉매의 밴드갭이 2.95 eV에서 2.54 eV로 감소하였고, 산소 결핍 자리 영역이 약 55% 증가하였다. 또한 제조한 광촉매의 초기 염료 분해 성능은 불소 도핑 전과 비교하였을 때 10%에서 60%로 불소 도핑 후 6배 증가하였다. 이는 불소가 도핑되어 광촉매의 밴드갭이 감소하여 적은 에너지로 촉매 활성 반응을 가능하게 하고, 또한 산소 결핍이 생성된 표면 결함이 WO3 광촉매의 가시광선 흡수영역을 증대시켜 광촉매 활성이 증가한 것으로 사료된다. 본 연구에서는 후처리 공정이 불필요한 원스텝 기상 불소화 반응을 이용하여 손쉬운 방법으로 광촉매활성이 뛰어난 불소가 도핑된 WO3-xFx 광촉매를 제조할 수 있음을 확인하였다.
A series of catalysts, NiO/$CeO_2-ZrO_2/WO_3$, for ethylene dimerization was prepared by the precipitation and impregnation methods. For NiO/$CeO_2-ZrO_2/WO_3$ sample, no diffraction line of nickel oxide was observed up to 40 wt%, indicating good dispersion of nickel oxide on the surface of catalyst. The hexagonal and monoclinic phases of $WO_3$ up to the calcination temperature of 500 ${^{\circ}C}$ were observed, whereas the hexagonal phase of WO3 completely was transformed into monoclinic phase of $WO_3$ at 600 ${^{\circ}C}$ and above. The role of $CeO_2$ in the catalysts was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity. The catalytic activities for ethylene dimerization were correlated with the acidity of catalysts measured by the ammonia chemisorption method. 25-NiO/5-$CeO_2-ZrO_2/15-WO_3$ containing 25 wt% NiO, 15 wt% $WO_3$ and 5 mol% $CeO_2$, and calcined at 400 ${^{\circ}C}$ exhibited a maximum catalytic activity due to the effects of $WO_3$ modifying and $CeO_2$ doping.
WO$_3$에 NiO를 첨가하여 제조한 후막형 시편의 미세구조와 전기적 성질에 대해 연구하였다. NiO 첨가에 따른 WO$_3$의 결정립 성장이 억제되었고, 입도 분포도 균일하였으나 첨가량에 따른 결정립 크기 변화정도는 작았다. 산소 분압 감소로 WO$_3$의 전도성은 증가하였고, NiO 첨가에 의해 고용한계 이하에서는 전도성이 증가하였고, 이상에서는 전도성이 감소하였다. 온도 증가에 따라 외인성 (extrinsic) 구간에서는 전도성 변화가 적었고, 고온의 진성 (intrinsic) 구간에서는 전도도가 급격히 증가하였으며, 이들의 중간 온도에서는 산소흡착에 따라 전도도가 감소하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.