• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.214.1-214.1
• /
• 2013

Tetra-ethoxysilane (TEOS)은 일반적으로 저온 게이트 산화막의 원료 널리 이용되고 있으나 as-deposited 상태에서는 필수적으로 생성된 높은 계면밀도와 고정전하를 제거하기 위하여 수소계면처리, forming gas annealing 등 후처리 공정을 필수적으로 거처야만 한다. 즉 후처리 공정 없이도 일정수준의 계면밀도와 고정전하를 갖을 수 있는 출발물질이 제안되면 산업적 의미를 갖을 것이다. 본 연구에서는 TEOS를 대체할 수 있는 후보재료로써 Tetra-iso-propoxysilane (T-iso-POS)을 제안하였다. T-iso-POS는 iso 구조의 3차원적 특수 구조를 가지므로 더 쉽게 분해 될 수 있어 탄소의 결합을 억제 할 수 있다고 사료된다. 용량 결합형 PECVD (13.56 MHz) 장비를 이용하여 RCA 세정을 실시 한 p-Si (100) 기판위에 TEOS 혹은 T-iso-POS (2 sccm)와 O2를 도입(50 sccm), 플라즈마 전원(20~100 W), 압력(0.1~0.5 torr), 온도 ($170{\sim}400^{\circ}C$), 전극 간 거리 (1~4.5cm)의 조건 하에서 증착하였다. 얻어진 각각의 SiO2 막에 대해, 성장 속도, 2% BHF 용액보다 에칭 속도, IV 특성과 C-V 특성, FT-IR에 의해 화학구조 평가를 실시했다. T-iso-POS원료로 사용하여 TEOS보다 낮은 약 $200^{\circ}C$에서 증착 된 산화막에서 후 처리 없이도 10 MV/cm 이상의 절연 파괴 특성을 나타내는 우수한 게이트 절연막 제작에 성공했다. 그 성장 속도도 약 20 nm/min로 높았다.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.196-202
• /
• 1997

PLT 박막의 증착방법으로 ECR PECVD법을 이용한 경우 $440~500^{\circ}C$의 비교적 낮은 온도에서 순수한 perovskite구조를 가진$(Pb,La)TiO_{3}$박막을 성공적으로 제조하였다. 기판온도 증가에 따라 반응기체 및 산화물(특히 Pb oxkde)의 휘발성이 증대되어 증착속도가 감소하고 (Pb oxide)의 휘발성이 증대되어 증착속도가 감소하고 (Pb+La)/Ti조성비가 감소하였다. $460~480^{\circ}C$의 온도범위에서 증착한 PLT 박막이 화학양론비를 가장 잘 만족하였으며 이때 높은 유전상수와 가장 우수한 누설전류 특성을 나타내었다. $La(DPM)_{3}$ 유입량 증가에 따라 $(Pb, La)TiO_{3}$ 박막의 La 조성이 거의 직선적으로 비례하여 증가하였는데 La/Ti비가 3.0%에서 9.5%까지 증가함에 따라 PLT 박막의 유전 상수는 360부터 650까지 증가하였고 100kV/cm 전기장하에서의 누설전류도 $4{\times}10^{-5}$에서 $4{\times}10_{-8}A/cm^2$로 향상되었다.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.234-239
• /
• 2007

This paper describes the TiW ohmic contact characteristics under the surface treatment of the polycrystalline 3C-SiC thin film grown on $SiO_2/Si(100)$ wafers by APCVD. The poly 3C-SiC surface was polished by using CMP(chemical mechanical polishing) process and then oxidized by wet-oxidation process, and finally removed SiC oxide layers. A TiW thin film as a metalization process was deposited on the surface treated poly 3C-SiC layer and was annealed through a RTA(rapid thermal annealing) process. TiW/poly 3C-SiC was investigated to get mechanical, physical, and electrical characteristics using SEM, XRD, XPS, AFM, optical microscope, I-V characteristic, and four-point probe, respectively. Contact resistivity of the surface treated 3C-SiC was measured as the lowest $1.2{\times}10^{-5}{\Omega}cm^2$ at $900^{\circ}C$ for 45 sec. Therefore, the surface treatments of poly 3C-SiC are necessary to get better contact resistance for extreme environment MEMS applications.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.147-151
• /
• 1999

YBCO step-edge Josephson junction were fabricated on sapphire substrates. The steps were formed on R-plane sapphire substrates by using Ar ion milling with PR masks. The step angle was controlled in the wide range from 25$^{\circ}$ to 50$^{\circ}$ by adjusting both the Ar ion incident angle and the photoresist mask rotation angle relative to the incident Ar ion beam. CeO$_2$ buffer layer and in-situ YBa$_2Cu_3O_{7-{\delta}}$ (YBCO) thin films was deposited on the stepped R-plane sapphire substrates by pulsed laser deposition method. The YBCO film thickness was varied to obtain the ratio of film thickness to step height in the range from 0.5 to 1. The step edge junction exhibited RSJ-like behaviors with I$_cR_n$ product of 100 ${\sim}$ 300 ${\mu}$V, critical current density of 10$^3$ ${\sim}$ 10$^5$ A/ cm$^2$ at 77 K.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.61-66
• /
• 1999

The Spin-dependent tunneling magnetoresistance (TMR) effect was observed in $NiFe/Al_2O_3$/Co thin films. The samples were prepared by magnetron sputtering in a system with a base pressure of $3\times10^{-6}$Torr. the insulating $Al_2O_3$layer was prepared by r.f. plasma oxydation method of a metallic Al layer. The ferromagnetic and insulating layers were deposited through metallic masks to produce the cross pattern form. The junction has an active area of $0.3\times0.3\textrm{mm}^2$ and the $Al_2O_3$layer is deposited through a circular mask with a diameter of 1mm. It is very important that insulating layer is formed very thinly and uniformly in tunneling junction. The ferromagnetic layer was fabricated in optimum conditions and the surface of that was very flat, which was observed by AFM. Tunneling junction was confirmed through nonlinear I-V curve. $NiFe/Al_2O_3$/Co junction was observed for magnetization behavior and magnetoresistance property and magnetoresistance property is dependent on magnetization behavior and magnetoresistance property and magnetoresistance property is dependent on magnetization behavior of t재 ferromagnetic layer. The maximum magnetoresistance ratio was about 6.5%.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.128-128
• /
• 2003

Electrochromism (EC) is defined as a phenomenon in which a change in color takes place in the presence of an applied voltage. Because of their low power consumption, high coloration efficiency, EC devices have a variety of potential applications in smart windows, mirror, and optical switching devices. An EC devices generally consist of a transparent conducting layer, electrochromic cathodic and anodic coloring materials and an ion conducting electrolyte. EC has been widely studied in transition metal oxides(e.g., WO$_3$, NiO, V$_2$O$\sub$5/) Among these materials, WO$_3$ is a most interesting material for cathodic coloration materials due to its lush coloration efficiency (CE), large dynamic range, cyclic reversibility, and low cost material. WO$_3$ films have been prepared by a variety of methods including vacuum evaporation, chemical vapor deposition, electrodeposition process, sol-gel synthesis, sputtering, and laser ablation. Sol-gel process is widely used for oxide film at low temperature in atmosphere and requires lower capital investment to deposit large area coating compared to vacuum deposition process.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.135-154
• /
• 1992

This study was performed to analyze bond strength, the alterations of the interfaces between metal films which are populary used and considered to contribute to the chemical reaction with porcelain, according to constant ion- beam- mixing, and the relation between interfacial chemical reactions and bond strength in metal/porcelain specimens. For this study, three seperate metals : selected-gold, indium and tin were chosen ; each to be bonded to a seperate body porcelain. Bonding occurs when the metal is deposited to the body porcelain using a vacuum evaporator. The vacuum evaporator used $10^{-5}\sim10^{-6}$ Torr vacuum states for the evaporation of various metals (Au, Sn, In). Ion-beam-mixing of the porcelain/metal interfaces caused reactions when the Ar+ was implanted into thin films using a 80 KeV accelerator. These ion-beam-mixed specimens were then compared with an unmixed control group. An analysis of bond strength and ionic changes between the the metal and porcelain was performed by electron spectroscopy of chemical analysis (ESCA) and scratch test. The finding led to the following conclusions : 1. Light microscopic views of the scratch test : The ion-beam-mixed Au/porcelain specimen showed narrower scratched streams than the unmixed specimen. However, the Sn/porcelain, In/porcelain specimens showed no differences in the two conditions. 2. Acoustic emissions in scratch tests : The ion-mixed Au/porcelain, In/porcelain specimens showed signals closer to the metal/porcelain interfaces than unmixed specimens. Conversely, the ion-mixed Sn/porcelain specimen showed more critical signals in superficial portions than unmixed specimens. 3. After ion- beam-mixing, the Au/porcelain specimen showed apparently increased bond strength, and the In/porcelain specimen showed very slightly increased bond strength. However, the Sn/porcelain specimen showed no differences between ion mixed specimen and the unmixed one. 4. ESCA analysis : The ion-beam-mixed Au/porcelain specimen showed a higher peak separated value (4.3eV) than that of the unmixed specimen(3.65eV), the ion-beam-mixed In/porcelain specimen showed a higher peak separated value (9.43eV) than that of the unmixed specimen(7.6eV) and the ion-beam-mixed Sn/porcelain specimen showed a higher peak separated value (8.79eV) than that of the unmixed specimen(8.5eV). 5. Interfacial changes were observed in the ion-mixed Au/porcelain, In/porcelain and Sn/porcelain specimens. Especially, significant interfacial changes were measured in the ion- mixed Sn/porcelain specimen. Tin dioxide(SnO2) and a combination of pure tin and tin dioxide (Sn+SnO2) were produced. 6. In the Au/porcelain specimen, the interfacial chemical reaction showed increased bond strength between gold and porcelain substrate. But, in the In/porcelain, Sn/porcelain specimens, interfacial chemical reactions did not affected the bond strength between metal and porcelain substrate. Especially, bonding strength on the ion mixed Sn/porcelain specimen showed the least amount of difference.

• 한국재료학회지
• /
• 제27권6호
• /
• pp.345-349
• /
• 2017

The effects of electron beam(EB) irradiation on the electrical and optical properties of InGaZnO(IGZO) thin films fabricated using a sol-gel process were investigated. As the EB dose increased, the electrical characteristic of the IGZO TFTs changed from semiconductor to conductor, and the threshold voltage values shifted to the negative direction. X-ray photoelectron spectroscopy analysis of the O 1s core level showed that the relative area of oxygen vacancies increased from 14.68 to 19.08 % as the EB dose increased from 0 to $1.5{\times}10^{16}electrons/cm^2$. In addition, spectroscopic ellipsometer analysis showed that the optical band gap varied from 3.39 to 3.46 eV with increasing EB dose. From the result of band alignment, it was confirmed that the Fermi level($E_F$) of the sample irradiated with $1.5{\times}10^{16}electrons/cm^2$ was located at the closest position to the conduction band minimum(CBM) due to the increase of electron carrier concentration.

• 한국재료학회지
• /
• 제6권9호
• /
• pp.931-936
• /
• 1996

비휘발성 메모리 소자에의 적용을 위한 SrBi2Ta2O9(SBT)박막이 고순도의 Sr, Bi, Ti 금속타겟을 사용하여 Pt/Ti/SiO2/Si 기판 위에 reactive sputtering 법에 의해 증착되었다. 조성의 영향을 평가하기 위하여 Bi 타겟에 인가되는 전원의 변화와 열처리에 따른 C-F(capacitance-frequency), P-E(polarization-electric field), I-V(current-voltage)등의 전기적 특성이 조사되었다. Bi의 양이 증가함에 따라 Bi layer 구조를 나타내는 (105)회절 피크가 증가하였고 $700^{\circ}C$, 산소분위기에서 1시간 동안 열처리후 Sr과 Bi가 심하게 휘발되었으며 박막의 미세구조는 다공질이 되었다. 이러한 이유로 열처리된 박막의 누설 전류 밀도는 증가하였다. 열처리된 시편의 조성은 거의 화학양론비를 이루었으며 4.5$\mu$C/$\textrm{cm}^2$의 Pr값을 갖는 강유전(ferroelectric)특성을 나타내었다.

• Applied Science and Convergence Technology
• /
• 제25권2호
• /
• pp.28-31
• /
• 2016

The structural and the electronic properties of pentacene on modified Si (001) were investigated using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and ultraviolet photoelectron spectroscopy (UPS). Dodecane was used to modify Si (001) substrates and then pentacene was deposited on dodecane/Si (001). Our STM results show a uniform distribution of aggregated dodecane molecules all over the clean Si (001). The surface structure of pentacene on dodecaene/Si (001) examined by AFM is analogous to that of pentacene on $SiO_2$. The UPS data showed that the work function of pentacene on clean Si (001) and pentacene on modified Si (001) with dodecane was 6.41 and 5.57 eV, respectively. Our results prove that dodecane results in the work function difference between pentacene on clean Si (001) and pentacene on dodecane/Si (001).