• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.72-75
• /
• 2000

The effect of $Al_2O_3+Y_2O_3$ additives on fracture toughness of ${\beta}-SiC-TiB_2$ composites by hot-pressed sintering were investigated, The ${\beta}-SiC-TiB_2$ ceramic composites were hot-presse sintered and annealed by adding 4, 8, 12wt% $Al_2O_3+Y_2O_3$(6 : 4wt%) powder as a liquid forming additives at low temperature($1800^{\circ}C$) for 4h. In this microstructures, the relative density is over 97% of the theoretical density and the porosity increased with increasing $Al_2O_3+Y_2O_3$ contents because of the increasing tendency of pore formation. But the fracture toughness showed the highest of $7.0MPa{\cdot}m^{1/2}$ for composites added with 12wt% $Al_2O_3+Y_2O_3$ additives at room temperature. The electrical resistivity showed the lowest of $1.59\times10^{-3}\Omega{\cdot}cm$ for composite added with 8wt% $Al_2O_3+Y_2O_3$ additives at room temperature and is all positive temperature coefficient resistance(PTCR} against temperature up to $700^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.19-27
• /
• 1993

Abstract The PZT thin film was deposited by usin. RF magnetron sputtering with PZT(52/48) target. The formation of perovskite structure PZT thin film started at 55$0^{\circ}C$ on Si substrate. The AES results showed an oxide layer formed at the between Si and PZT film during the annealing. And, Ti$O_2$ layer appeared at the between TiN and PZT film for the annealing. But, the perovskite phase PZT film was formed after the annealing on the Si$O_2$/Si substarte. The ratio in PZT film was constant across the asdeposited PZT film, but, Pb have diffused into the Si substrate and Si have out-diffused into PZT layer during the post annealing at 75$0^{\circ}C$. The dielectric constants of PZT film indicated about 1300( thickness: 1500$\AA$, at 10KHz) but, the cracks were appeared to surface for annealing.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1634-1636
• /
• 2000

The mechanical and electrical properties of the hot-pressed and annealed $\beta$-SiC-$TiB_2$ electroconductive ceramic composites were investigated as function of the liquid forming additives of $Al_{2}O_{3}+Y_{2}O_3$ and the annealing method. Phase analysis of composites by XRD revealed $\alpha$-SiC(6H), $TiB_2$, and YAG($Al_{5}Y_{3}O_{12}$). In pressureless annealing method, the relative density and the mechanical properties of composites were increased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents because YAG of reaction between $Al_{2}O_3$ and $Y_{2}O_3$ was increased. But In pressured annealing method, reaction between $Al_{2}O_3$ and $Y_{2}O_3$ formed YAG but the relative density decreased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents. The electrical resistivity of the composites was all positive temperature coefficient resistance (PTCR) in the temperature range of 25$^{\circ}C$ to 700$^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.75-78
• /
• 2004

$Bi_{3.25}Eu_{0.75}Ti_3O_{12}$ (BET) thin films were deposited on the $LaNiO_3$ (LNO (100))/Si and Pt/Ti/$SiO_2$/Si substrates by the metal-organic decomposition method. Structural and dielectric properties of BLT thin films for the applications in nonvolatile ferroelectric random access memories were investigated. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures $650^{\circ}C$, the BET thinfilms were successfully deposited on LNO bottom electrode and exhibited (001) and (117) orientation. Compared with the Pt electrode films, the BET thin films on the LNO electrode annealed at $650^{\circ}C$ showed better dielectric constantsand remanent polarization. The BET thin films on the LNO electrode for the annealing temperature of $650^{\circ}C$, the remanent polarization Pr and coercive field were $45.6\;C/cm^2$ and 171 kV/cm, respectively.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.479-481
• /
• 2000

The effect of $Al_{2}O_{3}+Y_{2}O_{3}$ additives on fracture toughness of $\beta-SiC-TiB_2$ composites by hot-pressed sintering were investigated. The f$\beta-SiC-TiB_2$ ceramic composites were hot-presse sintered and annealed by adding 16, 20, 24wt% $Al_{2}O_{3}+Y_{2}O_{3}$(6 : 4wt%) powder as a liquid forming additives at low temperature($1800^{\circ}C$) for 4h. In this microstructures, the relative density is over 95.88% of the theoretical density and the porosity increased with increasing $Al_{2}O_{3}+Y_{2}O_{3}$ contents because of the increasing tendency of pore formation. The fracture toughness showed the highest of $5.88MPa{\cdot}m^{1/2}$ for composites added with 20wt% $Al_{2}O_{3}+Y_{2}O_{3}$ additives at room temperature. The electrical resistivity showed the lowest of $5.22{\times}10^{-4}\Omega{\cdot}cm$ for composite added with 20wt% $Al_{2}O_{3}+Y_{2}O_{3}$ additives at room temperature and is all positive temperature coefficient resistance (PTCR) against temperature up to $700^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.236-237
• /
• 2005

The structural properties of $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films with post-annealing temperature were investigated. $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films were deposited by RF sputtering method on Pt/Ti/$SiO_2$/Si substrates with optimum deposition condition. The $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films was post-annealed at 600$^{\circ}C$, 650$^{\circ}C$, 700$^{\circ}C$, 750$^{\circ}C$, 800$^{\circ}C$ in furnace,respectively. Increasing the post-annealing temperature, the grain size, density and peak intensity of (117) and c-axis orientation were increased. The $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films that annealed at 750$^{\circ}C$ exhibited well crystallized phase and had no vacancy and grain was uniform. but there are some secondary phases observed. At this time, the average thickness of $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films was 2000 ${\AA}$.

• Journal of Powder Materials
• /
• v.2 no.1
• /
• pp.36-43
• /
• 1995

Rapidly solidified and mechanically alloyed Al-Ti base alloys were prepared by gas atomization and attritor milling separately. The gas atomized and the mechanically alloyed powders were consolidated after preheating at $450^{\circ}C$, and then heat treated isochronally for 1 hour to observe the microstructures and to investigate the mechanical properties. Stable phases of precipitates in the Al-Ti-Si and the Al-Ti-Zr alloys were identified as DO22-$(Al,Si)_3Ti$ and $Do_{23}-Al_3(Ti, Zr)$ each. Among the alloys, the mechanically alloyed Al-l0Ti-2Si alloy showed superior thermal stability and mechanical properties at elevated temperature. The additions of third elements, such as Si and Zr, to Al-Ti alloys seemed to improve the mechnical properties remarkably by stabilizing the microstructure and the precipitate phases in the consolidated alloys.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.449-456
• /
• 1996

BaO, SrCI2.6H2O 그리고 Ti(OPri)4를 출발 원료로 사용하여 균일한 BaxSr1-xTiO3(BST) 솔을 합성하였고, BST 박막을 회전 코팅 법으로 Si 및 Pt/Ti/SiO2/Si 기판위에 제조하였다. 적외선 및 NMR 스펙트럼 분석으로 킬레이션 조제로 사용한 acetylacetone(AcAc)이 엔올 형태로 Ti-알콕사이드와 결합하여 솔 안정화에 기여함을 확인하였다. Xedrogel에 대한 DT/TGA 및 적외선 스펙트럼 결과로부터 페로브스카이트 상생성이 $600^{\circ}C$ 이상에서 이루어짐을 관찰하였다. $700^{\circ}C$에서 열처리한 박마은 -300(10 KHz)의 상대유전율을 나타내었고, 결정립의 저항 및 입계의 병렬 RC 성분으로 등가회로를 구성할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.793-801
• /
• 1996

The effect of catalysts which was catalyzed by acid($HNO_3$) and base ($NH_4OH$) or not on the surface microst-ructures and consequent dielectric characteristics of the $PbTiO_3$ thin films prepared by sol-gel method were investigated. The result indicated that bse catalyst promoted the phase transformation of perovskite phase while acid catalyst was found to produce most uniform surface microstructure and improved dielectric properties However degradation of properties due to secondary phase formation and non-uniform microstructure at high annealing temperature (>75$0^{\circ}C$) by rapid diffusion of lead was unavoidable in any case as long as $Si_{(100)}$ \ $SiO_2$ \Pt substrate used.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.61-61
• /
• 1999

저항이 5$\Omega$-cm인 n-type Si(100) 웨이퍼를 실리콘 식각시 마스크로 사용하기 위하여 습식 열산화법을 이용하여 100$0^{\circ}C$에서 SiO2을 2400$\AA$ 성장시킨 후, OPCVD 공정을 통해 785$^{\circ}C$서 SiH2Cl2 가스 30sccm과 NH3가스 100sccm을 이용하여 Si3N4를 3000$\AA$ 증착시켰다. 이 웨이퍼를 포토-리쏘그라피 공정을 거쳐 지름 2$\mu\textrm{m}$의 포토레지스트 패턴을 제작한 후 600W의 RF power하에서 CF4 가스 10sccm, CHF3 가스 15sccm, O2가스 8sccm 및 Ar가스 10sccm을 이용하여 MERIE 방법으로 Si3N4를 식각한 다음, 7:1 BHF 용액내에서 30초간의 습식식각을 통해 40wt.%의 KOH 용액내에 8$0^{\circ}C$에서 30초간의 이방성 식각을 통해 피라미드 모양의 Si FEA(field emitter array)를 제작하였다. 본 실험은 다음과 같이 완성된 Si FEA를 샤프닝 산화 후 산화막 식각을 통해 마스크를 제거한 다음, tip의 열화학적 내구성을 증가시키고 장시간 구동시 안정성과 전계방출 전류밀도를 높이기 위해 tip의 표면에 Ti를 sputter 방법으로 약 300$\AA$ 증착시킨 후, RTA 장비를 이용하여 2단계 열처리 (first annealing:$600^{\circ}C$/30sec, second annealing : 85$0^{\circ}C$/15sec)를 통해 Si FEA의 경우보다 낮은 turn-on 전압과 높은 전계방출 특성을 나타낼 것으로 기대된다.