• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.73-74
• /
• 2006

Ferroelectric thin films have been widely investigated for future nonvolatile memory application. We fabricated the BLT ($(Bi,La)_4Ti_3O_{12}$) films on Si using a STA ($SrTa_2O_6$) buffer layer BLT and STA film were prepared by sol-gel method. Measurement data by XRD and AFM, showed that BLT film and STA films were well crystallized and a good surface morphology. From C-V measurement reward that the Au/BLT/STA/Si structure showed a clockwise hysteresis loop with a memory window of 1.5 V for the bias voltage sweep of ${\pm}5$ V. From results, the Au/BLT/STA/Si structure is useful for FeFETs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.193-197
• /
• 2004

The organic light emitting diode (OLED) is proposed as the novel source in the microchip because it has ideal merits (various wavelengths, thin-film structure and overall emitting) for the integration. In this paper, we fabricated the finger-type pin photodiodes for fluorescence detection and the advanced microchip with OLED integrated pn the microchannel. The finger-type in the diode design extended the depletion region and reduced the internal resistance about 31.2% than rectangular-type. The photodiodes had a 100pA leakage current and a 8720 sensitivity $(I_{Light}/I_{Dark})$ at -1 V bias. The interference filter with 32 layers ($SiO_2$, $TiO_2$) was directly deposited on the photodiode. The OLED was fabricated on the ITO coated glass and was bonded with LOC. The application of thin-film OLED increased the excitation efficiency and simplified the integration process extremely. The prototype device of this application had a superior sensitivity of 100nM-LOD in the fluorescence detection.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.221-225
• /
• 2003

The MFIS-FET(Field Effect Transistor) devices using $BLT/Y_2O_3$ buffer layer on p-Si(100) substrates were fabricated by the Sol-Gel method and conventional memory processes. The crystal structure, morphologies and electrical properties of prepared devices were investigated by using various measuring techniques. From the C-V(capacitance-voltage) data at 5V, the memory window voltage of the $Pt/BLT/Y_2O_3/si$ structure decreased from 1.4V to 0.6V with increasing the annealing temperature from $700^{\circ}C\;to\;750^{\circ}C$. The drain current (Ic) as a function of gate voltages $(V_G)$ for the $MFIS(Pt/BLT/Y_2O_3/Si(100))-FET$ devices at gate voltages $(V_G)$ of 3V, 4V and 5V, the memory window voltages increased from 0.3V to 0.8V as $V_G$ increased from 3V to 5V.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.193-193
• /
• 2012

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is the most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. Single-chamber PECVD system for a-Si:H solar cell manufacturing has the advantage of lower initial investment and maintenance cost for the equipment. However, in single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of single-chamber PECVD system. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. In order to remove the deposited B inside of the plasma chamber during p-layer deposition, a high RF power was applied right after p-layer deposition with SiH4 gas off, which is then followed by i-layer, n-layer, and Ag top-electrode deposition without vacuum break. In addition to the p-i interface control, various interface control techniques such as FTO-glass pre-annealing in O2 environment to further reduce sheet resistance of FTO-glass, thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, and hydrogen plasma treatment prior to n-layer deposition, etc. were developed. The best initial solar cell efficiency using single-chamber PECVD system of 10.5% for test cell area of 0.2 $cm^2$ could be achieved by adopting various interface control methods.

• 한국진공학회지
• /
• 제17권1호
• /
• pp.28-33
• /
• 2008

R.F 마그네트론 스퍼터링 방법을 이용하여 Indium tin oxide(ITO)가 증착된 유리기판 위에 PLZT ($Pb_{1.1}La_{0.08}Zr_{0.65}Ti_{0.35}O_3$) 박막을 제작하였다. 기판온도를 $500^{\circ}C$로 고정하여 증착한 후 급속열처리 방법으로 다양한 온도 ($550-750^{\circ}C$)에서 후열처리 하였다. 후열처리온도의 변화에 따른 PLZT 박막의 결정학적 특성을 X선 회절법을 통하여 분석하였고 원자간력 현미경을 이용하여 박막의 표면 상태를 관찰하였다. 또한 precision material analyzer 을 이용하여 분극이력곡선과 피로특성을 측정하였다. 후 열처리 온도가 증가함에 따라 잔류분극 값(Pr)은 $10.6{\mu}C/cm^2$ 에서 $31.4{\mu}C/cm^2$로 증가하였으며 항전계(Ec)는 79.9 kV/cm에서 60.9 kV/cm로 감소하는 경향을 보였다. 또한 피로특성의 경우 1MHz 주파수에서 ${\pm}5V$의 square wave를 인가하여 측정한 결과 $700^{\circ}C$에서 후열처리한 시편의 경우 $10^9$회 이상의 분극반전을 거듭하였을 때 분극값이 15% 감소하는 결과를 나타내었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.537-541
• /
• 2003

강유전체(SrTiO$_3$) 박막을 게이트 절연층으로 하여 수소화 된 비정질 실리콘 박막 트랜지스터를 유리 기판위에 제조하였다. 강유전체는 기존의 SiO$_2$, SiN 등과 같은 게이트 절연체에 비하여 유전특성이 매우 뛰어나 TFT의 ON 전류를 증가시키고 문턱전압을 낮추며 항복특성을 개선하여 준다. PECVD 에 의하여 증착된 a-Si:H 는 FTIR 측정 결과 2,000 $cm^{-}$1 과 635 $cm^{-}$l 및 876 cm-1 에서 흡수 밴드가 나타났으며, 2,000 $cm^{-1}$ / 과 635 $cm^{-1}$ / 은 SiH$_1$ 의 stretching 과 rocking 모드에 기인 한 것이며 876 $cm^{-1}$ / 의 weak 밴드는 SiH$_2$ vibration 모드에 의한 것이다. a-SiN:H 는 optical bandgap 이 2.61 eV 이고 굴절률은 1.8 - 2.0, 저항률은 $10^{11}$ - $10^{15}$ $\Omega$-cm 정도로 실험 조건에 따라 약간 다르게 나타난다. 강유전체(SrTiO$_3$) 박막의 유전상수는 60 - 100 정도이고 항복전계는 1MV/cm 이상으로 우수한 절연특성을 갖고 있다. 강유전체를 이용한 TFT 의 채널 길이는 8 - 20 $\mu$m, 채널 넓이는 80 - 200 $\mu$m 로서 드레인 전류가 게이트 전압 20V에서 3 $\mu$A 이고 Ion/Ioff 비는 $10^{5}$ - $10^{6}$, Vth 는 4 - 5 volts 이다.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.775-780
• /
• 1995

MOCVD(Metal-Organic Chemical Vapor Dposition) TiN 박막을 다양한 온도와 압력에서 tetrakis-dimethyl-amino-titanium(TDMAT (Ti[N($CH_3$)$_2$]$_4$))의 자체 열분해와 NH$_3$와의 반응을 사용하여 형성하였다. 비저항은 박막내의 불순물 함량에 의존하였는데 특히 XPS curve fitting 결과 주요 불순물인 탄소와 산소 같은 불순물들이 박막내에서 다양한 침입형화합물을 만들어 박막의 물리적, 전기적 특성에 영향을 준다는 것을 알았다. Metal-organic source만을 사용하여 TiN을 형성할 경우 지름이 0.5$\mu\textrm{m}$이고 aspect ratio가 3:1인 구멍에서 step coverage가 매우 우수하였으나 NH$_3$를 흘림에 따라 step coverage가 감소하는 것이 SEM으로 확인되었는데 이는 각각의 활성화에너지와 관련된 것으로 보인다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.581-584
• /
• 2002

In this work, a CPW resonator was designed and fabricated to investigate the basic microwave properties, such as effective dielectric constant, of BST thin films. Their properties were used as basic data to simulate and design CPW tunable bandpass filter. We also report on gold/$Ba_{0.5}Sr_{0.5}TiO_3$(BST) ferroelectric thin film C-band tunable bandpass filters(BPFs) designed and fabricated on magnesium oxide substrates using CPW structure. The 2 pole filter was designed for a center frequency of 5.88 GHz with a bandwidth of 9 %. The BST based CPW filter offers a high sensitivity parameter as well as a low loss parameter. The tuning range for the bandpass filter with CPW structure was determined to be 170 MHz.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1572-1575
• /
• 2005

Poly(vinyl phenol)(PVP)/$TiO_2$ nanocomposite the films have been prepared incorporating metal alkoxide with vinyl polymer to obtain high dielectric constant gate insulating material for a organic thin film transistor. The surface composition, the morphology, and the thermal and electrical properties of the hybrid nanocomposite films were observed by ESCA, scanning electron microscopy (SEM), atomic force microscopy(AFM), and thermogravimetric analysis (TGA). Thin hybrid films exhibit much higher dielectric constants (7.79 at 40wt% metal alkoxide).

• Current Photovoltaic Research
• /
• 제9권1호
• /
• pp.1-5
• /
• 2021

The properties of the electron transport layer (ETL) have a great effect on perovskite solar cell performance. Depositing conformal SnO2 ETL on bottom textured silicon cells is essential to increase current density in terms of the silicon-perovskite tandem solar cells. In the recent study, the SnO2 electron transport layer deposited by the sputtering method showed an efficiency of 19.8%. Also, an electron transport layer with a sputtered TiO2 electron transport layer in a 4-terminal tandem solar cell has been reported. In this study, we synthesized SnOx ETL with a various sputtering power range of 30-60W by Radio-frequency (RF)-magnetron sputtering. The properties of SnOx thin film were characterized using ellipsometer, UV-vis spectrometer, and IV measurement. With a sputtering power of 50W, the solar cell showed the highest efficiency of 13.3%, because of the highest fill factor by the conductivity of SnOx film.