• 한국진공학회지
• /
• 제7권s1호
• /
• pp.100-105
• /
• 1998

This paper describes the preparation of Pt-and $TiO_2$-doped $Nb_2O_5$ thin film by Ion-Beam-Enhanced Deposition. Platinum and titanium doping, and Nb2O5 deposition were carried out in situ. The dependence of oxygen sensing properties on the amounts of Pt and Ti dopant in the $Nb_2O_5$ film was investigated. There were the highist sensitivity, the lowest temperature coefficient and the shortest responce time at doping of 5 mol% $TiO_2$ and 0.3 mol%Pt

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.455-458
• /
• 2001

The thin films of high pemitivity in ferroelectric materials using a capacitor are applied to DRAMs and FRAMs. (Ba, Sr)$TiO_3$ thin films as ferroelectric materials were prepared by the sol-gel method and made by spin-coating on the Pt/Ti/$SiO_2/Si$ substrate at 4,000 [rpm] for 10 seconds. The devices of BST thin films to composite $(Ba_{0.7},Sr_{0.3})TiO_3$ were fabricated by changing of the depositing layer number on $Pt/Ti/SiO_2/Si$ substrate. The thin film capacitor to be ferroelectric devices was investigated by structural and electrical properties. The thickness of BST thin films at each coating numbers 3, 4 and 5 times was $2500[\AA]$, $3500[\AA]$, $3800[\AA]$. The dielectric factor of thin film when the coating numbers were 3, 4 and 5 times was 190, 400 and 460 on frequency l[MHz]. The dielectric loss of BST thin film was linearly increased by increasing of the specimen area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.455-458
• /
• 2001

The thin films of high permitivity in ferroelectric materials using a capacitor are applied to DRAMs and FRAMs. (Ba, Sr)TiO$_3$ thin films as ferroelectric materials were prepared by the sol-gel method and made by spin-coating on the Pt/Ti/SiO$_2$/Si substrate at 4,700 [rpm] for 10 seconds. The devices of BST thin films to composite (Ba$\_$0.7/Sr$\_$0.3/)TiO$_3$ were fabricated by changing of the depositing layer number on Pt/Ti/SiO$_2$/Si substrate. The thin film capacitor to be ferroelectric devices was investigated by structural and electrical properties. The thickness of BST thin films at each coating numbers 3, 4 and 5 times was 2500[${\AA}$], 3500[${\AA}$], 3800[${\AA}$]. The dielectric factor of thin film when the coating numbers were 3, 4 and 5 times was 190, 400 and 460 on frequency 1[MHz]. The dielectric loss of BST thin film was linearly increased by increasing of the specimen area.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.475-475
• /
• 2014

Dye sensitized solar cells (DSSCs) are regarded as potential inexpensive alternatives to conventional solid-state devices. The flexible version, employing conductive-plastic-film substrates, is appealing for commercialization of DSSCs because it not only reduces the weight and cost of the device but also extends their applications. However, the need for high temperature does not permit the use of plastic-film substrate. So, development of low-temperature methods is therefore realization of flexible DSSCs. In this work, the electrophoretic deposition combined with hydrothermal treatment was employed to prepare nanocrystalline $TiO_2$ thin film at low temperature. We confirmed the prepared $TiO_2$ thin films with different voltages and deposition times in the electrophoretic deposition process. Properties of the $TiO_2$ films were investigated by various analysis method such as X-ray diffraction, field emission scanning electron microscopy (FESEM) and UV-visible spectrophotometer.

• 대한전자공학회논문지SD
• /
• 제39권12호
• /
• pp.1008-1015
• /
• 2002

분극처리 없이 제작한 lanthanum-modified lead titanate (PLT) 박막의 초전특성에 대한 변조 주파수 의존성을 dynamic method를 이용하여 조사하였다. La이 10mo1% 첨가된 Pb/sub l-x/La/sub x/Ti/sub l-x/4/O₃ (h=0.1) (PLT(10)) 박막을 Pt/TiO/sub x//SiO₂/Si 기판위에 acetate 계 precursor 을 이용한 sol-gel 법으로 제작하였다. 제작된 PLT(10) 박막은 비교적 우수한 유전특성을 보였다. 초전계수 (p) 는 주파수 의존성이 없이 6.6×10/sup -9/ C/㎠·K 을 나타내었다. 이를 이용하여 구한 전압감도와 비검출능을 위한 재료평가지수는 각각 1.03×10/sup -11/ C·㎝/J 과 1.46×10/sup -9/C·㎝/J 로 나타났다. 제작된 PLT(10) 박막 초전형 적외선 센서는 주파수 8Hz 에서 5.15v/w 의 전압감도 (Rv)를 가지며, 잡음등가전력 (NEP) 과 비검출능 (D/sup */) 은 동일한 주파수 100Hz 에서 각각 9.93×10/sup -8/W/Hz/sup 1/2/와 1.81×10/sup 6/cm·Hz/sup 1/2//W 의 최소값과 최대값을 나타내었다. 이와 같은 특성들은 PLT(10) 박막이 초전형 적외선 센서의 감지물질로 매우 적합함을 나타낸 것이다.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1577-1587
• /
• 1994

TiO2 thin films with the substitution of oxygen with nitrogen were deposited on silicon substrate by metalorganic chemical vapor deposition (MOCVD) using Ti(OCH(CH3)2)4 (titanium tetraisopropoxide, TTIP) and N2O as source materials. X-ray diffraction (XRD) results indicated that the crystal structure of the deposited thin films was anatase TiO2 with only (101) plane observed at the deposition temperatures of 36$0^{\circ}C$ and 38$0^{\circ}C$, and with (101) and (200) plane at above 40$0^{\circ}C$. Raman spectroscopic results indicated that the crystal structure was anatase TiO2 in accordance with the XRD results without any rutile, fcc TiN, or hcp TiN structure. No fundamental difference was observed with temperature increase, but the peak intensity at 194.5 cm-1 increased with strong intensity at 143.0 cm-1 for all samples. The crystalline size of the films varied from 49.2 nm to 63.9 nm with increasing temperature as determined by slow-scan XRD experiments. The refractive index of the films increased from 2.40 to 2.55 as temperature increased. X-ray photoelectron spectroscopy (XPS) study showed only Ti 2s, Ti 2p, C 1s, O 1s and O 2s peaks at the surface of the film. The composition of the surface was estimated to be TiO1.98 from the quatitative analysis. In the bulk of the film Ti 2s, Ti 2p, O 1s, O 2s, N 1s and N 2s were detected, and Ti-N bonding was observed due to the substitution of oxygen with nitrogen. A satellite structure was observed in the Ti 2p due to the Ti-N bonding, and the composition of titanium nitride was determined to be about TiN1.0 from the position of the binding energy of Ti-N 2p3/2 and the quatitative analysis. The spectrum of Ti 2p energy level could be the sum of a 4, 5, or 6 Gaussian curve reconstruction, and the case of the sum of the 6 Gaussian curve reconstruction was physically most meaningful. From the results of Auger electron spectroscopy (AES), it was known that the composition was not varied significantly throughout the whole thickness of the film, and silicon oxide was not observed at the interface between the film and the substrate. The composition of the film was possible (TiO2)1-x.(TiN)x or TiO2-2xNx and in this experimental condition x was found to be about 0.21-0.16.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.558-562
• /
• 2012

As an alternative energy, Dye-sensitized solar cells (DSSCs) have received much attention due to low cost manufacturing procedure and high energy consumption rate. Incorporating scattering centers in the nanocrystalline photoanode or additional scattering layers on the nanocrystalline photoanode is an effective way to enhance the light harvest efficiency of the photoanode and the performance of dye-sensitized solar cells (DSSCs). The light scattering abilities of these scattering layers also depend on the relative sizes and phase of the particles in the layers. A higher surface area is normally obtained using large particle sizes. Therefore, transparent high surface area $TiO_2$ layers and an additional scattering layer consisting of $TiO_2$-Rutile 500 nm paste with relatively larger particles are attractive. In this work, we investigates the applicability of a hybrid $TiO_2$ electrode (or a working electrode with a light scattering layer) in a DSSCs. We fabrication various thin film using $TiO_2$ paste 20 nm and $TiO_2$ paste 500 nm. As a result, the efficiency of the a single structure thin film was 3.35% and the efficiency as scattering layer of hybrid structure thin film was 4.36%, 4.73%.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.501-504
• /
• 2003

본 연구에서는 박막트랜지스터의 특성 향상을 위하여 강유전성 박막을 게이트 절연충으로 사용하기 위하여 강유전성 박막과 a-Si:H 의 계면특성을 조사하였다. 먼저 강유전성 박막 중에 대표적인 SrTiO$_3$를 E-BEAM 증착기로 박막을 형성시켰다. 형성된 박막은 $N_2$ 분위기에서 15$0^{\circ}C$~$600^{\circ}C$로 1시간 ANNEALING 하여 전자현미경으로 표면을 측정하였다. SrTiO$_3$의 유전상수는 50~100 정도였으며 항복전계는 1~l.5 MV/cm로 매우 우수한 유전특성을 갖고 있었다. 강유전체 박막 위에 a-SiN:H,a-Si:H(n-type a-Si:H) 등을 PECVD로 증착하여 MFNS구조를 형성하였다. 계면특성을 C-V PLOTTER로 측정한 결과 SrTiO$_3$ 박막은 SiN 과의 접합이 매우 안정되어 있었고 C-V특성은 SiN/a-Si:H 과 유사하였다. 그러나 FERROELECTRIC/a-S:H의 경우가 훨씬 CAPACITANCE값이 컸으며, 이는 강유전체 박막의 높은 유전상수에 기인 된 것이라 생각된다.

• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.399-403
• /
• 2006

현재 넓은 표면적과 메조기공 뿐만 아니라 $TiO_2$의 넓은 band gap과 그 광학 활성 등으로 인하여 크게 각광받고 있는 메조포러스 $TiO_2$ 박막을 합성하기 위해 여러 가지 합성방법이 제시되고 있으나, 그 합성이 습도나 온도 등의 여러조건에 따라 크게 영향을 받아 재현성이 떨어진다는 치명적인 문제점이 제기되어 왔다. 이는 합성 용액 내에서 $TiO_2$ 전구체가 가수분해 및 축합반응을 하면서 구조유도체와의 자기조립에 의한 나노구조물 형성하는 과정에서 $TiO_2$의 전구체가 온도나 습도 등 주변의 영향을 많이 받기 때문이다. 본 연구에서는 2차원 구조의 메조기공을 가진 $TiO_2$ 박막을 재현성 있게 얻을 수 있는 실험 조건을 찾고자 하였다. 이를 위해 촉매인 HCl과 $TiO_2$ 전구체의 몰비 그리고 $TiO_2$ 전구체와 P-123의 몰비 등의 합성 조건뿐 아니라 코팅과정 도중이나 이후의 습도와 온도가 미치는 영향에 대한 실험을 수행하였고 그 특성을 XRD와 TEM 등으로 분석하였다.

• 한국재료학회지
• /
• 제3권1호
• /
• pp.19-27
• /
• 1993

RF magnetrom sputtering으로 52/48 PZT target을 사용하여 PZT thin film을 증착시킨후, furnace annealing을 실시하여 Si 기판에서는 55$0^{\circ}C$에서부터 안정상인 peroskite구조가 형성되었다. Si기판위에서는 후속열처리시 계면에 상당한 산화막층이 형성되었으며 TiN 기판위에서는 후속열처리시 TiN층은 사라지고 Ti$O_2$층이 형성되었다. Si$O_2$기판에서는 후속열처리후에도 안정한 PZT film을 형성시킬 수 있었다. As-depo.시에는 PZT film의 조성비가 균일하게 유지되었으나 75$0^{\circ}C$후속열 처리시에는 상당량의 Pb가 Si기판으로 diffusion하였으며 Si도 out-diffusion하였다. 전기적 특성은 10KHz에서 C-V를 측정결과 약 1300정도의유전상수 값이 나왔으나 후속열처리시 표면에 crack이 발생하였다.