• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.151-151
• /
• 2012

A new plasma process, i.e., the combination of PIII&D and HIPIMS, was developed to implant non-gaseous ions into materials surface. HIPIMS is a special mode of operation of pulsed-DC magnetron sputtering, in which high pulsed DC power exceeding ~1 kW/$cm^2$ of its peak power density is applied to the magnetron sputtering target while the average power density remains manageable to the cooling capacity of the equipment by using a very small duty ratio of operation. Due to the high peak power density applied to the sputtering target, a large fraction of sputtered atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed plasma of sputtered target material by HIPIMS operation, the implantation of non-gaseous ions can be successfully accomplished. The new process has great advantage that thin film deposition and non-gaseous ion implantation along with in-situ film modification can be achieved in a single plasma chamber. Even broader application areas of PIII&D technology are believed to be envisaged by this newly developed process. In one application of non-gaseous plasma immersion ion implantation, Ge ions were implanted into SiO2 thin film at 60 keV to form Ge quantum dots embedded in SiO2 dielectric material. The crystalline Ge quantum dots were shown to be 5~10 nm in size and well dispersed in SiO2 matrix. In another application, Ag ions were implanted into SS-304 substrate to endow the anti-microbial property of the surface. Yet another bio-application was Mg ion implantation into Ti to improve its osteointegration property for bone implants. Catalyst is another promising application field of nongaseous plasma immersion ion implantation because ion implantation results in atomically dispersed catalytic agents with high surface to volume ratio. Pt ions were implanted into the surface of Al2O3 catalytic supporter and its H2 generation property was measured for DME reforming catalyst. In this talk, a newly developed, non-gaseous plasma immersion ion implantation technique and its applications would be shown and discussed.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.251-255
• /
• 2007

높은 유전상수와 낮은 유전손실을 가지는 $(1-x)BCB-xBNT(BaNd_2Ti_4O_{12})$ (x=20, 30, 40, 50 vol%) 복합 재료를 제작하였다. 제작된 film의 유전 상수와 유전 손실은 1 MHz에서 측정되었고, DSC와 같은 열분석을 통하여 그 경화거동을 관찰하고, BNT의 함량과 film의 경화 거동이 유전특성에 어떠한 영향을 미치는지에 대하여 조사하였다. 충진제로 사용된 BNT가 $20{\sim}50vol%$까지 증가함에 따라 그 복합체의 유전상수는 증가, 유전 손실($tan{\delta}$)은 감소하였고, BCB-BNT 복합체의 유전 상수와 유전 손실($tan{\delta}$)은 경화 반응에 거의 영향을 받지 않는다. 그러나 경화 온도가 증가함에 따라 TCC(Temperature Characteristics of Coefficient)가 감소하는 것으로 복합체의 경화는 $250^{\circ}C$ 이상에서 가장 안정하다는 것을 확인하였다.

• 멤브레인
• /
• 제24권1호
• /
• pp.39-49
• /
• 2014

고도정수처리를 위한 관형 세라믹 정밀여과와 이산화티타늄($TiO_2$) 광촉매 첨가 PES (polyethersulfone) 구의 혼성공정에서 pH 및 산소 역세척의 영향을 막오염에 의한 저항($R_f$) 및 투과선속(J), 총여과부피($V_T$)의 관점에서 고찰하였다. pH가 높아질수록 $R_f$가 감소하고, J는 증가하는 경향을 보였다. 결과적으로 pH 9에서 최대의 $V_T$를 나타내었다. 탁도의 처리효율은 pH와 무관하게 98.7~99.0%의 비슷한 처리효율을 보였다. 용존유기물질(DOM)의 처리효율은 pH가 높아질수록 감소하였다. 산소와 질소 역세척의 차이를 비교한 결과, $R_{f,180}$ 값이 산소 역세척 시 질소보다 낮게 나타났고, 초기투과선속($J_0$)으로 무차원 화한 최종투과선속($J_{180}/J_0$)은 역세척 주기(FT) 10분과 12분을 제외하고 산소 역세척이 질소 보다 높게 유지되었다. 산소 역세척 시 탁도물질의 처리효율은 질소 보다 다소 높게 나타났지만, 그 차이는 미비하다. 질소 역세척 시 DOM의 처리율은 산소보다 높게 나타났다. 또한, 포화산소 조건에서 탁도물질의 처리율은 산소 또는 질소 역세척 경우와 비슷하게 나타났지만, 포화산소가 광촉매와 반응하여 OH 라디칼을 생성하였기 때문에 DOM의 처리효율은 큰 폭으로 증가하였다.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.316-322
• /
• 2006

본 연구의 목적은 환경담배연기를 대표하는 주요 오염물질 중에 하나인 니코틴의 분해를 위해서 산화티타늄 광촉매를 적용할 수 있는지 여부에 대하여 기술적 평가하는 것이다. 광촉매로 코팅된 건축자재를 이용하여 니코틴을 분해하는 정도를 평가하기 위하여 네 개의 기초 실험을 수행하였다. 니코틴의 광촉매 분해와 관련된 다음의 다섯 변수를 조사하였다: 코팅 타일의 건조조건, 코팅 졸의 종류, 코팅횟수, 상대습도, 그리고 초기농도. 변수 시험에 앞서, 실험장치에 대한 니코틴의 흡착 여부를 평가하였다. 본 연구에서 조사된 변수 모두가 니코틴의 광산화분해능에 영향을 미치는 것으로 나타났다. 낮은 온도와 긴 건조시간 조건과 비교할 때 높은 온도와 짧은 건조시간 조건에서 건조된 타일에서 보다 높은 니코틴 분해효율을 나타내었다. ST-KO3 졸로 코팅된 타일이 E-T 졸로 코팅된 타일 보다 높은 분해효율을 나타내었다. 코팅횟수가 증가할수록 광산화분해가 잘 일어났다. 높은 상대습도와 낮은 유입농도 조건에서 광산화분해가 잘 일어났다. 결과적으로, 환경담배연기에 포함된 니코틴을 광촉매로 코팅된 건축자재를 적용할 때에는 본 연구에서 평가된 다섯 가지 변수가 모두 고려되어야함이 제안되었다.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.244-249
• /
• 2007

The present work considers the concept of enzymatic photoelectrochemical generation of hydrogen through water splitting using a Xe lamp as a source of light. A solar cell was applied to the system in order to shift the level of electrochemical energy of the system, resulting in the rate of hydrogen production at $43\;{\mu}mol/(cm^2{\times}hr)$ in cathodic compartment with an anodized tubular $TiO_2$ electrode(ATTE, $5^{\circ}C$/1hr in 0.5 wt% HF-$650^{\circ}C$/5hr). The trend of the rate of hydrogen production, for the ATTEs with different annealing temperature from $350^{\circ}C$ to $850^{\circ}C$, fairly well coincided with the photoelectrical properties measured by potentiostat. The actual chemical bias through imposition of two electrolytes of different pHs between anode(13.68) and cathode(7.5) was 0.24eV.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.118.1-118.1
• /
• 2011

The dye-sensitized solar cell (DSSC) is a device for the conversion of visible light into electricity, based on the sensitization of wide bandgap semiconductors. The performance of the cell mainly depends on a dye used as sensitizer. The absorption spectrum of the dye and the anchorage of the dye to the surface of TiO2 are important parameters determining the efficiency of the cell. Generally, transition metal coordination compounds(ruthenium polypyridyl complexes) are used as the effective sensitizers, due to their intense charge-transfer absorption in the whole visible range and highly efficient metal-to ligand charge transfer. However, ruthenium polypyridyl complexes contain a heavy metal, which is undesirable from point of view of the environmental aspects. Moreover, the process to synthesize the complexes is complicated and costly. Alternatively, organic dyes can be used for the same purpose with an acceptable efficiency. The advantages of organic dyes include their availability and low cost. We designed and synthesized a series of organic sensitizers containing long wavelength absorption-chromophores for the dye sensitized solar cell. The DSSC composed of Blue-chromophores for the sensitization absorbed long wavelength region which is different also applied into the dye-cocktail (mixing) system. The photovoltaic property of DSSCs organic long wavelength absorption-chromophores were measured and evaluated by comparison with that of individual chromophores.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.6-13
• /
• 2011

In this study, we used activated carbon (AC) and charcoal (CH) as carbon sources with $TiO_2$ powder to prepare spherical carbons containing titania (SCCT) by using phenolic resin (PR) as a bonding agent. The physicochemical characteristics of the SCCT samples were examined by BET, XRD, SEM, EDX, iodine adsorption and compressive strength. The photocatalytic activity was evaluated by measuring the removal efficiency of three kinds of organic dyes: methylene blue (MB), methyl orange (MO) and rhodamine B (Rh.B) under a UV/SCCT system. In addition, evaluation of chemical oxygen demand (COD) of piggery waste was done at regular intervals and gave a good idea about the mineralization of wastewater.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.43-49
• /
• 2005

Temperature stabilities of resonance frequencies of the substrates are very important in piezoelectric ceramics oscillators and fitters. In this study, it was investigated thermal resisting property of the length-extensional vibration mode of PZT ceramics. The mode can be utilized in fabricating ultra-small 55 kHz IF devices. We fabricated the ceramic specimens with x = 0.51, 0.52, 0.53, 0.54, and 0.55 in the Pb(Zr$\sub$x/Ti$\sub$1-x/)O$_3$ system. And their resonance frequencies were measured before 1st thermal aging, after 1st and 2nd thermal aging. In order to investigate the influence of thermal aging on thermal resisting properties, thermally aged specimens were once mote thermally aged. Before 1st thermal aging, the specimens of the compositions with morphotropic phase, x = 0.53 and rhombohedral phase, x = 0.54 have weak thermal resisting property of resonance frequency, while tetragonal phase, x = 0.51 has robust thermal resisting property of resonance frequency. 1st thermal aging improved thermal resisting property of resonance frequency in all specimens.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.464-467
• /
• 2005

In this paper, we present techniques to manufacture color electronic ink for multi-color electrophoretic display implementation. The charged color pigments have been prepared to have superior affinity for dielectric fluid. White $TiO_2$ nanoparticles were modified with poly(methyl methacrylate) copolymer for a microencapsulated electrophoretic display system, in order to reduce the density mismatch between nanoparticles and dielectric medium. These color balls and white pigment particle suspensions were microencapsulated through the typical microencapsulation technique. We fabricate the microcapsules to the single layer on flexible ITO substrate to test the multi-color electrophoretic display application.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.216-219
• /
• 2005

In precision length measurements using optical interferometry based on homodyne or heterodyne principles, it is crucial to have frequency-stabilized monochromatic light sources. To the end, we investigate the possibility of utilizing the optical comb constituted by ultrashort femtosecond pulse lasers generated from a gain medium of titanium-doped aluminium oxide $(Ti:Al_2O_3)$. The optical comb is stabilized by locking to the caesium atomic clock, which allows all the modes of the comb to maintain an extremely high level of frequency stabilization to precision of one part in $10^{16}$. Then, high precision length measurements are realized by extracting a single or group of particularly wanted optical frequency components or by adopting a third-party light source locked to the comb. Required measurement system setup will be presented in detail along with experimental results.