• 제목/요약/키워드: $TiO_2$ photodegradation

검색결과 112건 처리시간 0.024초

가시광 응답형 광촉매 제조와 이를 활용한 실내공기환경 개선 적용 타당성 조사 (Feasibility Study of IAQ Enhancement by Visible Light Photocatalyst)

  • 이태규;윤우석;김동형;황철순;임지훈;윤정호;김영미
    • KIEAE Journal
    • /
    • 제4권2호
    • /
    • pp.37-40
    • /
    • 2004
  • New visible photocatalyst(Nanovis$^{(R)}$) has been synthesized to overcome the barrier of limitation of UV light utilization of current $TiO_2$ photocatalyst. It was found that red shift of absorption spectrum to 550nm was achieved. Its physical properties were characterized by XRD, BET and TEM. It is also observed that Nanovis$^{(R)}$ has a photocatalytic activity for photodegradation of Trichloroethylene under visible light irradiation. V,VII group doped into substitutional sites of $TiO_2$ has proven to be indispensable for band-gap narrowing and photocatalytic activity. These test results lead us to conclude that Nanovis$^{(R)}$ can be used for IAQ improvemen and for photocatalytic water splitting to hydrogen.

고효율 광분해 시스템을 이용한 VOC 분해 성능 연구 (A Study on the Photodegradation of VOC by High efficiency System)

  • 도영웅;박성애;하진욱
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2007년도 추계학술발표논문집
    • /
    • pp.386-389
    • /
    • 2007
  • 본 논문은 $TiO_2$(Degussa, P-25), 바인더(A-9540) 그리고 용제의 배합비율을 바꾸어 코팅액을 제조하여 금속판에 코팅한 후, 고농도의 IPA를 주입하여 분해효율을 고찰하였다. 고형분 함량 비율 변화에서는 $TiO_2$ 함량은 증가하고 바인더가 감소할수록 좋은 효율을 보였고, 용제는 ethanol과 MEK 두 가지 중에 MEK의 분해효율이 좋았다. 용제(MEK)함량 비율 변화에서는 일정량의 용제가 있을 경우 분해효율이 좋았고, 용제함량이 낮아질 경우 코팅액 점도가 높아지고 건조 후에는 표면이 갈라지는 현상을 보였다. 결국, 용제함량 비율 변화는 바인더 함량 실험에도 영향을 주어 1.75:0.25:10일 때 가장 좋은 분해효율을 보였다.

  • PDF

광촉매가 코팅된 플라스틱 광섬유를 이용한 VOC 광분해반응 (Photodegradation of VOCs by Using TiO$_2$-Coated POF)

  • Ha, Jin-Wook;Joo, Hyun-Ku
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2003년도 춘계학술발표논문집
    • /
    • pp.350-352
    • /
    • 2003
  • In this study plastic optical fibers(POFs) were considered as light-transmitting media and substrates for the potential use in photocatalytic environmental purification system. After the characteristics of POFs in terms of light transmittance and absorption were determined at the beginning, the detailed investigation was further performed through the photocatalytic degradation of trichloroethylene(TCE), iso-propanol and etc. with TiO$_2$-coated optical fiber reactor systems(POFR). It is concluded that the use of POfs is preferred to quartz optical fibers(QOFs) since the advantages such as ease of handling, lower cost, relatively reasonable light attenuation at the wavelength of near 400nm can be obtained. Various geometrical reactor shapes have been constructed and applied for the last one and half years. For the use of POF in water phase treatment, however, more detailed scientific and engineering aspects should be envisaged. This case requires a suitable mixture to obtain more stable and innocuous immobilization of photocatalyst on POF.

  • PDF

Photodegradation of Volatile Organic Compound (VOC) Through V-Doped or CuOx-grafted $TiO_2$ nanoparticles

  • Kim, Beum Woo;Kim, Seonmin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.271.1-271.1
    • /
    • 2013
  • Titania is usually used in sun-screens, tooth paste, and other daily used objects as a pigment. However, scientists have focused on titania as photocatalyst due to its excellent activities. By fabricating vanadium doped TiO2 and CuOx co-catalyzed TiO2 nano-size filter, the degradation level of the volatile organic compound (VOC) concentration was tested using 365nm UV LED as light source in a closed chamber. Main purpose for this test is to evaluate the activities of various catalysts for degrading the VOCs which are detrimental to human body and toluene and p-xylene were chosen in the VOC removal test. Target gas materials were injected into the test chamber with dry air as carrier gas which was flowed into the gas washer bottle filled with liquid form of VOC substance. When the VOC gas flows into the chamber, it is circulated by 200 mm fan in order to contact with the set-up filter on the aluminum holder. Target gas concentration in the chamber was monitored using VOC detector (miniRae3000, Raesystems) which was also placed inside the chamber. With the measured concentration, the VOC degradation efficiency and the degradation rate were evaluated and used to compare the catalytic activities.

  • PDF

염료폐수 분해를 위한 가시광 감응형 Pt-C-TiO2 광촉매의 합성 (Synthesis of Visible-working Pt-C-TiO2 Photocatalyst for the Degradation of Dye Wastewater)

  • 한미선;윤창연;이종협
    • 청정기술
    • /
    • 제11권3호
    • /
    • pp.123-128
    • /
    • 2005
  • $TiO_2$는 금속 산화물의 일종으로서 자체가 가지고 있는 물리화학적 안정성, 무독성, 탁월한 유기물의 산화분해력 등으로 인해 저농도의 환경 유해물질 정화 분야로 응용이 활발히 연구되고 있는 반도체 물질이다. 그러나 $TiO_2$는 자외선 영역대(${\lambda}$ < 387 nm, 태양광의 2.7%가 UV)의 빛을 통해서 활성을 나타내고, 여기된 전자의 빠른 전자-정공 재결합속도로 인해 광 효율이 저하되는 단점을 갖는다. 따라서 광 감응 파장대를 넓히고 재결합속도를 길게 함으로써 광효율을 높이고, 광촉매 활성을 증대하는 방향으로 연구의 초점이 모아지고 있는 실정이다. 본 연구에서는 $TiO_2$ 광촉매의 광 감응 파장대를 가시광선 영역으로 확대함과 동시에 여기된 전자와 정공의 재결합시간을 연장하기 위하여 백금(Pt)이 광침적(photodeposition)된 탄소(C) 도핑 $TiO_2$를 제조하였다. 제조한 $Pt-C-TiO_2$의 특성은 전자투과현미경(Transmission Electron Microscopic; TEM), 질소흡탈착법(Brunauer-Emmett-Teller method; BET), X-ray 회절 분석법(X-ray Diffractometer; XRD), 분광 산란 광도계(UV-visible diffuse reflectance spectroscopy; UV-Vis DRS), X-ray 광전자 광도계(X-ray Photoelectron Spectroscopy; XPS)를 통하여 살펴보았다. $Pt-C-TiO_2$의 광촉매 활성을 검증하기 위하여 아조 계열의 붉은색 염료인 Acid Red 44 ($C_{10}H_7N=NC_{10}H_3(SO_3Na)_2OH$)의 광분해 실험을 수행하였다. 광원은 Xe arc 램프(300 W, Oriel)를 사용하였으며 420 nm 이하 제거 필터를 사용하여 가시광 영역대의 빛만을 조사되도록 하였다. 그 결과, 제조한 $Pt-C-TiO_2$는 가시광선 하에서 사용제품과 비교하여 월등히 뛰어난 분해력을 보이며 $C-TiO_2$의 활성을 한 층 더 향상시킴을 확인하였다. 이는 무한 에너지 자원인 태양광을 이용한 염료 폐수 정화 시스템 응용으로의 유용한 결과라 할 수 있겠다.

  • PDF

A Comparison of Efficiency of Decolorizing Rhodamine B using Lab-Scale Photocatalytic Reactors : Slurry Reactor, IWCR and PFBR

  • Na, Young-Soo;Lee, Tae-Kyung;Lee, Song-Woo;Lee, Chang-Han;Kim, Do-Han;Park, Young-Seek;Song, Seung-Koo
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제10권S_4호
    • /
    • pp.157-164
    • /
    • 2001
  • The performance of fluidized-bed reactor with Photomedia, immobilized TiO$_2$ onto the porous ceramic ball using a sol-gel method has been studied in this work. A simple model substrate, dilute Rhodamine B (RhB), was decolorized at room temperature. For the purpose of comparison, the slurry reactor and the Inner Wall Coated Reactor (IWCR) were used. The aim of this work was to develop the photocatalytic fluidized bed reactor (PFBR) through contrasting the photodegradability of various reactors such as the TiO$_2$slurry reactor, the inner-wall coated reactor (IWCR). In this study, the RhB was decolorized in three types of reactor. Even though the reaction rate constant of PFBR was lower than that of slurry reactor, PFBR had the advantages of preventing the wash-out of photocatalyst, so it can be operated continuously.

  • PDF

광촉매가 코팅된 플라스틱 광섬유을 이용한 VOC 광분해반응 (Photodegradation of VOCs by Using TiO$_2$-Coated POF)

  • Ha, Jin-Wook;Joo, Hyun-Ku
    • 한국산학기술학회논문지
    • /
    • 제4권3호
    • /
    • pp.199-203
    • /
    • 2003
  • In this study plastic optical fibers (POFs) were considered as light-transmitting media and substrates for the potential use in photocatalytic environmental purification system. After the characteristics of POFs in terms of light transmittance and absorption were determined at the beginning, the further investigation was performed through the photocatalytic degradation of trichloroethylene (TCE), iso-propanol and etc. with TiO$_2$-coated optical fiber reactor systems (POFR). It is concluded that the use of POFs is preferred to quartz optical fibers (QOFs) since the advantages such as ease of handling, lower cost, relatively reasonable light attenuation at the wavelength of near 400nm can be obtained. Various geometrical reactor shapes have been constructed and applied for the last one and half years. For the use of POF in water phase treatment, however, more detailed scientific and engineering aspects should be envisaged. This case requires a suitable mixture to obtain more stable and innocuous immobilization of photocatalyst on POF. To overcome this disadvantage, metal-organic chemical vapor deposition (MOCVD) was conducted in a fluidized bed to deposit thin films of titania on glass and alumina beads. Those can be used as photocatalysis for the removal of pollutants especially in liquid phases.

  • PDF

염료폐수 용액의 광축매-광화학 반응 (Photocatalytic-Photochemical Reaction of Wastewater Dyes in aqueous Solution)

  • 김삼혁;최칠남;정오진
    • 한국환경과학회지
    • /
    • 제8권2호
    • /
    • pp.241-248
    • /
    • 1999
  • The photocatalytic decolorization and photodegradation of wastewater contamininated with dyes such as methyleneblue tetrahydrate(MBT), methyl orange(MO), phenol red(PR) and the mixed dyes have been studied using a batch reactor in the presence of aerotropic and titania. Degussa P25 titanium oxide was used as the photocatalyst and proved to be effective for the dyes-degradation when irradiated with UV-light source emitting the wavelength of 253.7 nm in the presence of air. In addition to removing the color from the wastewater, the photocatalytic reaction simultaneously reduced the COD and optical density which suggests that the dissolved organic compounds have been photooxidized. The reaction rate of disappearance of the dyes were measured as a function of the irradiation times. The photooxidative procedure of the aquatic solution have the first order reaction-kinetics. The rate constants were increased in the order of PR < MBT < $gL^{-1}-TiO_2$ powder were irradiated with the UV -light source.

  • PDF

식물정유와 광촉매를 이용한 흡수제 제조 및 VOCs 제거특성에 관한 연구 (The Manufacture of Absorbents and Removal Characteristics of VOCs by Essential Oil and Photocatalyst)

  • 정해은;양경순;강민경;조준형;오광중
    • 청정기술
    • /
    • 제23권1호
    • /
    • pp.54-63
    • /
    • 2017
  • 산업발전과 공업화로 인해 VOCs의 발생이 증가하고 있고, VOCs는 불쾌감을 주며 불만을 불러일으키는 요인 중 하나이다. 이를 제어하기 위해 본 연구는 식물정유와 광촉매로 흡수제를 제조하여 벤젠과 톨루엔을 제거하고자 하였다. 식물정유물질 선정실험을 수행한 결과, 편백나무의 제거효율이 약 70%로 가장 높게 나타났으며, GC분석 결과 Monoterpene류와 Sesquiterpene로 이루어져 있음을 확인하였다. 광촉매 선정실험 결과, 광촉매 종류는 $TiO_2$의 효율이 가장 높게 나타났으며, UV lamp power는 10 W, $TiO_2$의 양은 $0.1gL^{-1}$부터 효율이 우수하게 나타났다. 수산화라디칼 생성특성 실험결과, $TiO_2$의 농도와 UV lamp power가 클수록 많은 양의 라디칼이 생성되었다. 제조된 흡수제의 제거효율 및 반응속도 실험결과, 제거효율은 최대 약 98%까지 나타났으며, 활성화 에너지는 약 $18kJmol^{-1}$로 나타났다.