• 전기학회논문지
• /
• 제59권2호
• /
• pp.363-368
• /
• 2010

In this work, electrochemiluminescence (ECL) cell using nanocrysralline $TiO_2$ electrode and Ru(II) complex (Ru${(bpy)_3}^{2+}$) is fabricated for low-cost high-efficient energy conversion device application. The nanocrysrallme $TiO_2$ layer (${\sim}10{\mu}m$ thickness) with large surface area (${\sim}360m^2$/g) can largely inject electrons from nanoporous $TiO_2$ electrode and allows the oxidation/reduction of Ru(II) complex in the nanopores. The cell structure is composed of a glass/ F-doped $SnO_2$(FTO)/ porous $TiO_2$/ Ru(II) complex in acetonitrile/ FTO/ glass. The nanocrysralline $TiO_2$ layer is prepared using sol-gel combustion method. The ECL efficiency of the cell consisting of the porous $TiO_2$ layers was 250 cd/W, which was higher than that consisting of only FTO electrode (50cd/W). The nanoporous $TiO_2$ layers wwas effective for increasine ECL intensities.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.362-366
• /
• 2014

Dye-sensitized solar cells (DSSCs) were synthesized using a $0.25cm^2$ area of a $TiO_2$ nanoparticle layer as the electrode and platinum (Pt) as the counter electrode. The $TiO_2$ nanoparticle layers (12 to 22 ${\mu}m$) were screen-printed on fluorine-doped tin oxide glass. Glancing angle X-ray diffraction results indicated that the $TiO_2$ layer is composed of pure anatase with no traces of rutile $TiO_2$. The Pt counter electrode and the ruthenium dye anchored $TiO_2$ electrode were then assembled. The best photovoltaic performance of DSSC, which consists of a $18{\mu}m$ thick $TiO_2$ nanoparticle layer, was observed at a short circuit current density ($J_{sc}$) of $14.68mA{\cdot}cm^{-2}$, an open circuit voltage ($V_{oc}$) of 0.72V, a fill factor (FF) of 63.0%, and an energy conversion efficiency (${\eta}$) of 6.65%. It can be concluded that the electrode thickness is attributed to the energy conversion efficiency of DSSCs.

• 한국결정성장학회지
• /
• 제4권4호
• /
• pp.378-387
• /
• 1994

선행연구[1] 즉, $Ti0_2/Pb/TiO_2(900{\AA}/900{\AA}/900{\AA}/)$ 3층구조박막으로부터 열확산에 의해 상형성이 가능하였던 $PbTiO_3$ 박막의 특성을 개선하기 위하여 스퍼터링법을 이용하여 Si기판위에 각 요소층의 두께를 $200~300 {\AA}$으로 얇게하고 적층수를 3,5,7,9,11층$(TiO_2/Pb/.../Tio_2)$으로 변화시켜가며 다층구조박막을 형성한 후 이를 RTA 처리하여 $PbTiO_3$ 박막을 제조하였다. 그 결과 $500^{\circ}C$ 이상에서 단일상의 $PbTiO_3$가 형성되었다. 또한 요소층의 두께를 얇게하고 적층수를 늘려서 열처리한 결과 Pb-silicate 및 void 생성이 억제되어 우수한 계면상태를 유지하였으며 조성도 보다 균일해지는 양상을 나타내었다. $PbTiO_3$ 박막의 MiM구조에 C-V 특성으로부터 측정된 유전상수는 열처리 조건에 따른 경향을 나타내지 않았으나 적층수가 많아져 박막의 두께가 증가 할수록 유전상수가 증가하였다. MIS 구조의 $PbTiO_3$ 박막의 I-V 특성 측정 결과 절연파괴강도는 최고 150kV/cm이었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1895-1899
• /
• 2012

$SiO_2$-coated $TiO_2$ composite materials with enhanced photocatalytic activity under UV light was prepared by a simple catalytic hydrolysis method. XRD, TEM, UV-vis spectroscopy, Photoluminescence, FT-IR and XP spectra were used to characterize the prepared samples. The obvious shell-core structure was shown for obtained $SiO_2$@$TiO_2$ sample. The average thickness of the $SiO_2$ coating layer was 2-3 nm. The interaction between $SiO_2$ and $TiO_2$ restrained the recombination of excited electrons and holes. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under UV light. The photocatalytic activity of $SiO_2$@$TiO_2$ was much higher than that of P25 and mechanical mixing sample $SiO_2/TiO_2$. The possible mechanism for the photocatalysis was proposed.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.482-487
• /
• 2002

A $TiO_2$ film for photocatalyst was prepared by anodic oxidation at 180V in acidic electrolyte and film formation mechanism was studied. The major part of anodic $TiO_2$ film consisted of anatase type structure and surface morphology exhibited a porous cell structure. The thickness growth rate of the oxide film with anodization time revealed two-stage slope corresponds to the surface morphology between anodic films. The growth of pores on cell structure and the growth rate of film with two-stage slope are related to the constant formation rate of the $TiO_2$ layer.

• ETRI Journal
• /
• 제31권6호
• /
• pp.675-679
• /
• 2009

$Ti_xSi_{1-x}O_y$ (TSO) thin films are fabricated using plasma-enhanced atomic layer deposition. The Ti content in the TSO films is controlled by adjusting the sub-cycle ratio of $TiO_2$ and $SiO_2$. The refractive indices of $SiO_2$ and $TiO_2$ are 1.4 and 2.4, respectively. Hence, tailoring of the refractivity indices from 1.4 to 2.4 is feasible. The controllability of the refractive index and film thickness enables application of an antireflection coating layer to TSO films for use as a thin film solar cell. The TSO coating layer on an Si wafer dramatically reduces reflectivity compared to a bare Si wafer. In the measurement of the current-voltage characteristics, a nonlinear coefficient of 13.6 is obtained in the TSO films.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.57-65
• /
• 2002

The photocatalytic degradation of TCE using solar energy in POFR was studied. The use of solar energy was investigated in plastic optica fiber photocatalytic reactor (POFR). In POFR, the main parameters of photocatalytic degradation of TCE were lihgt intensity, thickness of $TiO_2$-coated film on plastic fiber core, the same of total $TiO_2$-coated surface area with changed length. We studied the apparent photonic efficiency and photocatalytic degradation rate of TCE in POFR. The apparent photonic efficiency of various light intensities was decreased by an incresed intensities. The photocatalytic activities of $TiO_2$-coated optical fiber reactor system depended on the coating thickness, and total clad-stripped surface area of POF. Photocatalytic degradation of trichloroethylene ($C_2HCl_3$, TCE) in the gas-phase was elucidated by using $TiO_2$-coated plastic optical fiber reactor. In TCE degradation, in-situ FTIR measurement resulted in mineralization into $CO_2$.

• 전기화학회지
• /
• 제15권3호
• /
• pp.149-153
• /
• 2012

The $Cu_2O/TiO_2$ inverse opal heterojunction arrays were developed by electrochemical deposition of $Cu_2O$ nanoparticles on $TiO_2$ inverse opal arrays. The $Cu_2O$ nanoparticles completely filled the inner pores of $TiO_2$ inverse opal film (prepared by liquid phase deposition with an average thickness of 400 nm) and covered the entire area; exhibiting high crystalline properties of anatase and cubic phase from $TiO_2$ and $Cu_2O$, respectively. From asymmetric current-voltage profile, it was noticeable that a heterojunction was well formed for charge transport from $Cu_2O$ to $TiO_2$ film resulting from the enhanced charge separation yield. In addition, increased photocurrent of 0.19 $mA/cm^2$ (versus 0.08 $mA/cm^2$ under dark condition) was obtained at -0.35 V from the heterojunction structure in the 0.5M $Na_2SO_4$ solution.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.506-510
• /
• 2010

염료감응 태양전지에서 $TiO_2$의 표면에서 일어나는 전자의 재결합 현상은 태양전지의 변환효율을 떨어뜨리는 주요한 원인이다. 본 연구에서는 이 전자의 재결합 현상을 제어하기 위해 $TiO_2$의 표면에 에너지 장벽을 도입하여 변환효율을 향상시키고자 하였다. $TiO_2$ 나노전극에 에너지 장벽의 역할을 하는 $Nb_2O_5$를 코팅시켰다. 코팅의 영향을 알아보기 위해 코팅횟수를 변화시키며 실험하였다. 가시광선 영역에서의 반사율로부터 코팅의 유무를 확인하고 회절패턴으로부터 코팅물질이 $Nb_2O_5$임을 확인하였다. 재결합을 제어할 수 있는 코팅막의 두께를 측정해 본 결과, 12회 코팅하였을 때 코팅막의 두께는 약 5 nm로 1회 코팅시 적층되는 코팅막의 두께는 약 0.417 nm로 볼 수 있었다. 코팅횟수에 따른 변환효율의 변화는 코팅막이 없는 경우 2.55%에서 2회 코팅한 경우 4.25%로 약 1.7배 증가하여 2회 코팅의 경우 효율이 가장 높았다. 따라서 $Nb_2O_5$ 2회 코팅의 경우 코팅막의 두께가 약 0.834 nm로 전자의 재결합을 가장 잘 제어할 수 있었다.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.189-199
• /
• 2009

The Powder characteristics and sintering behavior of $SiO_2$ coated $BaTiO_3$ were studied. $BaTiO_3$ powders were synthesized by the liquid mix method developed by Pechini, and silica coating was prepared by alkoxide hydrolysis method with TEOS and ethanol. The particle size of the $BaTiO_3$ powders was 35 nm and the thickness of the $SiO_2$ coating layer was 5 nm. As the $SiO_2$ content increased, the $SiO_2$ layers improved the powder dispersion by increasing electrostatic repulsion between the $BaTiO_3$ particles. Effects of MgO coating on microstructure and dielectric properties of $BaTiO_3$ have been studied compared with mechanically MgO mixed $BaTiO_3$. MgO coated $BaTiO_3$ particles were prepared by a homogeneous precipitation method using $MgCl_2\cdot 6H_2O$ and urea. MgO coated $BaTiO_3$ exhibited homogeneous microstructure compared with mixed samples. XRD analysis revealed that Mg substitution for the Ti site in the MgO mixed sample was much greater than in the coated one. Electrical properties of MgO mixed and coated $BaTiO_3$ were affected by the diffusion behavior of Mg in $BaTiO_3$ lattice.