• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.173-179
• /
• 2018

Electrochemical characterization was conducted on poly(vinyl alcohol) (PVA)-ceramic composite (PVA-CC) separators for supercapacitor applications. The PVA-CC separators were fabricated by mixing various ceramic particles including aluminum oxide ($Al_2O_3$), silicon dioxide ($SiO_2$), and titanium dioxide ($TiO_2$) into a PVA aqueous solution. These ceramic particles help to create amorphous regions in the crystalline structure of the polymer matrix to increase the ionic conductivity of PVA. Supercapacitors were assembled using PVA-CC separators with symmetric activated carbon electrodes and electrochemical characterization showed enhanced specific capacitance, rate capability, cycle life, and ionic conductivity. Supercapacitors using the $PVA-TiO_2$ composite separator showed particularly good electrochemical performance with a 14.4% specific capacitance increase over supercapacitors using the bare PVA separator after 1000 cycles. With regards to safety, PVA becomes plasticized when immersed in 6 M KOH aqueous solution, thus there was no appreciable loss in tear resistance when the ceramic particles were added to PVA. Thus, the enhanced electrochemical properties can be attained without reduction in safety making the addition of ceramic nanoparticles to PVA separators a cost-effective strategy for increasing the ionic conductivity of separator materials for supercapacitor applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.264-264
• /
• 2012

As an environment-friendly alternative energy resource, ethanol may be used to obtain hydrogen, a clean energy source. Thus, studies on catalytic reactions involving ethanol have been studied to understand the underlying principles in the reaction mechanism using various oxide-supported catalysts. Among them, Au-based catalysts have shown a superior activity in producing hydrogen gas. In the present study, Au/$TiO_2$ catalysts were prepared by deposition-precipitation method to understand their catalytic activities toward ethanol and acetaldehyde with increasing gold loading, especially at the very low Au loading regime. A commercially available $TiO_2$ (Degussa P-25) was employed and the Au loading was varied to 0, 0.1, 0.5, and 1.0 wt% respectively. The catalysts showed characteristic x-ray diffraction (XRD) features at $2{\theta}=78.5^{\circ}$ that could be assigned to the presence of gold nanoparticles. Its reactivity measurements were performed under a constant flow of ethanol and acetaldehyde at a flow rate of ${\sim}0.6{\mu}mol/sec$ and the substrate temperature was slowly raised at a rate of 0.2 K/sec. We observed that the overall reactivity of the catalysts increased with increasing Au loading along with selectivity favoring dehydrogenation to product hydrogen gas. In addition, we disclosed various reaction channels involving competitive reaction paths such as dehydrogenation, dehydration, and condensation. In addition, subsequent reactions of acetaldehyde obtained from dehydrogenation of ethanol, were found to occur and produce butene, crotonaldehyde, furan, and benzene. Based on the results, we proposed overall reaction pathways of such reaction channels.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.353-353
• /
• 2011

Titanium dioxide is a suitable material for industrial use at present and in the future because titanium dioxide has efficient photoactivity, good stability and low cost [1]. Among the three phases (anatase, rutile, brookite) of titanium dioxide, the anatase form is particularly photocatalytically active under ultraviolet (UV) light. In fabrication of photocatalytic devices based on catalytic nanodiodes [2], it is challenging to obtain a photocatalytically active TiO2 thin film that can be prepared at low temperature (< 200$^{\circ}C$). Here, we present the synthesis of a titanium dioxide film using TiO2 nanoparticles and sol-gel methods. Titanium tetra-isopropoxide was used as the precursor and alcohol as the solvent. Titanium dioxide thin films were made using spin coating. The change of atomic structure was monitored after heating the thin film at 200$^{\circ}C$ and at 350$^{\circ}C$. The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microcopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy (UV-vis), and ellipsometry. XRD spectra show an anatase phase at low temperature, 200$^{\circ}C$. UV-vis confirms the anatase phase band gap energy (3.2 eV) when using the photocatalyst. TEM images reveal crystallization of the titanium dioxide at 200$^{\circ}C$. We will discuss the switching behavior of the Pt /sol-gel TiO2 /Pt layers that can be a new type of resistive random-access memory.

• 한국광물학회지
• /
• 제25권2호
• /
• pp.77-84
• /
• 2012

$TiO_2$의 동질이상체 중 하나인 아나타제는 고압 하에서 결정의 크기와 모양에 따라 다른 상변이 경로를 보이는 것으로 알려져 있다. 본 실험에 이용된 아나타제 분말시료는 15~25 nm 정도 크기의 입자로 구성되어 있으며, 고압라만분광분석 결과와 고압 X-선회절실험결과 분석을 종합하면 20 GPa 이상의 압력에서 비정질로 상변이하는 것으로 관찰되었다. 상온에서 압력의 영향으로 상변이한 비정질 구조는 압력을 제거하여도 출발 결정구조로 회귀하지 않는 것으로 밝혀졌다. 이 결과는 베델레이트로 상변이하는 이전의 결과와 상치되며, 출발시료 구성입자의 분급상태가 입자의 불안정성에 영향을 끼쳐 최종적으로 비정질화에 기여한 것으로 판단된다.

• 한국재료학회지
• /
• 제30권1호
• /
• pp.14-21
• /
• 2020

Carbon supports for dispersed platinum (Pt) electrocatalysts in direct methanol fuel cells (DMFCs) are being continuously developed to improve electrochemical performance and catalyst stability. However, carbon supports still require solutions to reduce costs and improve catalyst efficiency. In this study, we prepare well-dispersed Pt electrocatalysts by introducing titanium dioxide (TiO₂) into biomass based nitrogen-doped carbon supports. In order to obtain optimized electrochemical performance, different amounts of TiO₂ component are controlled by three types (Pt/TNC-2 wt%, Pt/TNC-4 wt%, and Pt/TNC-6 wt%). Especially, the anodic current density of Pt/TNC-4 wt% is 707.0 mA g^-1_pt, which is about 1.65 times higher than that of commercial Pt/C (429.1 mA g^-1_pt); Pt/TNC-4wt% also exhibits excellent catalytic stability, with a retention rate of 91 %. This novel support provides electrochemical performance improvement including several advantages of improved anodic current density and catalyst stability due to the well-dispersed Pt nanoparticles on the support by the introduction of TiO₂ component and nitrogen doping in carbon. Therefore, Pt/TNC-4 wt% may be electrocatalyst a promising catalyst as an anode for high-performance DMFCs.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.800-805
• /
• 2016

나노기술의 급격한 발전은 다양한 산업응용분야에 기여를 하고 있다. 그러나 나노제품의 증가와 함께, 비의도적인 환경노출이 발생되고 있다. 나노제품에 의한 잠재적인 환경영향은 전과정평가(LCA)를 통해 해석할 수 있다. LCA는 제품의 생산과 폐기에 이르는 전체 공정상의 자원소모 및 배출에 관한 체계적인 해석을 할 수 있다. 본 연구에서는, 나노-$TiO_2$를 이용한 초친수성 유수분리필터를 제조하는 공정에 관하여 LCA를 수행하였다. 이를 위해 무료로 공개된 $TOTAL^{TM}$을 사용하였으며, 6대 환경영향인자인 자원소모, 기후변화, 오존층영향, 산성화, 부영양화, 광화학산화물생성 등의 지표를 해석하였다. 또한 나노-$TiO_2$를 사용하는 것이 유수분리필터 제조공정에서 벌크-$TiO_2$를 사용하는 것보다 긍정적으로 환경영향인자에 기여하는 것으로 파악되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.155-155
• /
• 2017

Surface modifications are commonly utilized to adjust the properties of the titanium and its alloy surface to the specific needs of the medical applications, but there are disadvantages such as poor osteoconductive properties and low adhesion of bone cell to implant surface. In order to improve these disadvantages, changes in surface properties have an important effect on osseointegration during implantation. In this paper we applied new technological method for improving a unique surface modification using the characteristic of an electrolytic Solution. Thus, in the electrolyte containing NaF in Na2SO4, TiO2 nanoporous was uniformly formed, and HAp nanoparticles were electrodeposited around the TiO2 nanopores, but in the electrolyte containing NH4F in (NH4)H2PO4, the coarse protrusions including HAp nano particles were regularly deposited onto the TiO2 barrier layer. The surface characteristics and the distributed elements and have been investigated by EDS analysis, and ultra-fine structure of surface are carried out using FE-SEM. To investigate the behavior of the anion, the analysis of chemical states was performed by XPS, and the narrow spectrums for Ti2P, Ca 2p, and P 2p seems to be almost similar depending on the characteristics of the electrolyte solution respectively. In addition, Ca 2p spectrum could be resolved into two peaks for Ca 2p3/2 and 2p1/2 at 347.4 and 351.3 eV, which are related to hydroxyapatite. And, the P peak can also be deconvoluted into two peaks for P1/2 and P3/2 levels with binding energy 134.2 and 133.4 eV, respectively. From the result of soaking test, the apatite morphologys were well-formed onto the modified surface according to the different conditions.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.224-230
• /
• 2014

Nano-sized gadolinium-doped ceria (GDC)/nickel particle-dispersed $La_ySr_{1-y}Ti_{1-x}Fe_xO_3$ (LSFTO)-based composite solid oxide fuel cell anodes were fabricated by an infiltration method and the effects of the GDC/Ni nanoparticles on the anode polarization resistance and cell performance were investigated in terms of the infiltration time and nickel content. The anodic polarization resistance of the LSFTO anode was significantly enhanced by GDC and/or Ni infiltration and it decreased with increasing infiltration time and Ni content, respectively. It is believed that the observed phenomena are associated with enhancement of the ionic conductivity and catalytic activity in the nanocomposite anodes by the addition of GDC and Ni. Power densities of cells with the LSFTO and LSFTO-GDC/Ni nanocomposite anodes were 150 and $300mW/cm^2$ at $800^{\circ}C$, respectively.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.483-487
• /
• 2010

To fabricate $TiO_2$ nanoparticle-based dye sensitized solar cells (DSSCs) at a low-temperature, DSSCs were fabricated using hydropolymer and ZnO nanoparticles composites for the electron transport layer around a low-temperature ($200^{\circ}C$). ZnO nanoparticle with 20 nm and 60 nm diameter were used and Pt was deposited as a counter electrode on ITO/glass using an RF magnetron sputtering. We investigate the effect of ZnO nanoparticle concentration in hydropolymer and ZnO nanoparticle solution on the photoconversion performance of the low temperature fabricated ($200^{\circ}C$) DSSCs. Using cis-bis(isothiocyanato)bis(2,20 bipyridy1-4,40 dicarboxylato) ruthenium (II) bis-tetrabutylammonium (N719) dye as a sensitizer, the corresponding device performance and photo-physical characteristics are investigated through conventional physical characterization techniques. The effect of thickness of the ZnO photoelectrode and the morphology of the ZnO nanoparticles with the variations of hydropolymer to ZnO ratio on the photoconversion performance are also investigated. The morphology of the ZnO layer after sintering was examined using a field emission scanning electron microscope (FE-SEM). 60 nm ZnO nanoparticle DSSCs showed an incident photon-to-current conversion efficiency (IPCE) value of about 7% higher than that of 20 nm ZnO nanoparticle DSSCs. The maximum parameters of the short circuit current density ($J_{sc}$), the open circuit potential ($V_{oc}$), fill factor (ff), and efficiency ($\eta$) in the 60 nm ZnO nanoparticle-based DSSC devices were 4.93 mA/$cm^2$, 0.56V, 0.40, and 1.12%, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.31-31
• /
• 2003

최근 각종 산업 기술의 발달과 함께 다량의 악취, 오염 물질이 심각한 사회문제로 대두되고 있다. 특히 산업 현장의 경우, 악취로 인해 작업 환경이 매우 열악하여 환경 설비의 개발이 절실히 요구되고 있다. 본 연구에서는 기존의 스크러버 집진 장치의 친수성 가스를 제거할 수 있는 장점을 유지하면서, 소수성 기체의 제거율이 낮은 단점을 보완할 수 있는 TiO$_2$나노 입자의 광분해 특성을 이용한 스크러버 집진 장치를 제작하였다. TiO$_2$ 광촉매 나노 입자는 실험실에서 합성한 QT를 비롯하여, 국내외에서 생산된 P-25, NT-20, ST-01로 특성 분석을 실시하였다. 광촉매 나노 입자의 특성 분석에는 X선 회절 분석법, 적외선 분광기, 제타 전위 분석기, 동적 광산란 분광기를 사용하였으며, 그 결과 ST-01이 본 실험에 가장 적합한 광촉매로 선정되었다. 악취 및 대기 오염 물질 선정은 염색 가공 공장에서 정련제, 산화 환원제등으로 많이 사용하고 있는 암모니아, 아세트산, 옥탄올, 휘발성 유기물질인 톨루엔, 벤젠으로 하여, 실험실 자체 제작한 batch type과 산업 현장에서 사용할 수 있는 continuous type의 스크러버 이용하여 실험하였다. 이들 물질의 제거율은 가스 크로마토그래피, 자외선/가시광선 분광기를 이용하여 조사하였으며, 친수성 기체인 암모니아와 아세트산의 경우는 기존의 스크러버 효율의 약 70%인 반면에, 광촉매를 이용한 스크러버의 경우 90%이상의 우수한 제거 효과를 보였다. 또한, 기존의 스크러버가 거의 분해를 할 수 없었던 소수성 기체 옥탄올, 톨루엔, 벤젠의 경우는 기존의 스크러버가 약 10%내외를 제거하는 것에 비해, 광촉매를 이용한 스크러버의 경우 약 80% 이상의 제거 효율을 나타내었다. 결과적으로 광촉매를 이용한 스크러버의 제거효율이 기존의 스크러버에 비해, 친수성 가스의 경우 20% 이상, 소수성 가스의 경우70% 이상 향상되었음을 알 수 있었으며, 본 연구를 통해 광분해를 이용한 스크러버가 기존설비의 장.단점을 충분히 보완 가능한 환경 설비임을 확인할 수 있었다.