• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.29-32
• /
• 2004

This work was devoted to an investigation of etching mechanisms for $(Ba,Sr)TiO_3$ (BST) thin films in inductively coupled $CF_4/Ar$ plasma. We have found that an increase of the Ar content in $CF_4/Ar$ plasma causes non-monotonic behavior of BST etch rate, which reaches a maximum value of 40 nm/min at 80% Ar. Langmuir probe measurements show a weak sensitivity of both electron temperature and electron density to the change of $CF_5/Ar$ mixing ratio. O-D model for plasma chemistry gave monotonic changes of both volume densities and fluxes for active species responsible for the etching process. The analysis of surface kinetics confirms the possibility of non-monotonic etch rate behavior due to the concurrence of physical and chemical pathways in ion-assisted chemical reaction.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.4
• /
• pp.22-25
• /
• 2011

A single-coat $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) film of high critical currents ($I_c$) could be successfully fabricated by optimizing the viscosity of the coating solution in the metal-organic deposition (MOD) process. From a Ba-deficient coating solution (Y: Ba: Cu = 1: 1.5: 3) having the viscosity of 212 $mPa{\cdot}sec$, 0.9 ${\mu}m$-thick single coat YBCO film with the $I_c$ value of 289 A/cm-width ($J_c$ = 3.2 MA/$cm^2$) at 77 K was achievable on the $SrTiO_3$ (STO) substrate, which was superior to that of our previous report for 0.8 ${\mu}m$-thick single coat YBCO film from a stoichiometric coating solution (Y: Ba: Cu = 1: 2: 3) on the $LaAlO_3$ (LAO) substrate. This result might be attributed to denser and more homogeneous microstrcuture in the case of the YBCO film from the Ba-deficient coating solution.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.66-69
• /
• 2000

We have observed the morphology of YBCO thin films grown on the SrTiO$_3$(100) substrates by the Pulsed Laser Deposition method. AFM and SEM images show that the YBCO grains grow spirally from their own seeds whereas outgrowths are considered to remain unchained as the film thickness increases. The images of various stages of film growth suggest that the outgrowths of 1000${\sim}$2000 ${AA}$ size are mainly formed at the very early stage of film growth. The results of XRD measurement clearly show that even a film of about 10 ${AA}$ thickness already forms orthorhombic YBCO structure although common superconducting resistivity behavior is known to be observed for the films with thickness above 100 ${AA}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.31-34
• /
• 2003

($Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$ (BSCT) (x=0.10, 0.15, 0.20) powder, prepared by the sol-gel method, were mixed with organic vehicle and the BSCT thick films were fabricated by the screen-printing techniques on alumina substrates using the BSCT paste. The structural and the electrical properties were investigated for various composition ratio and sintering temperature. BSCT thick film thickness, obtained by four printings, was approximately 110 ~ 120 ${\mu}m$. The Curie temperature and dielectric constant at room temperature were decreased with increasing Ca content. The relative dielectric constant, dielectric loss and tunability of the BSCT(50/40/10) specimen, which was sintered at $1420^{\circ}C$ and measured at 1MHz, were about 910, 0.46% and 9.28% at 5kV/cm, respectively.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.91-94
• /
• 1999

A new type of high-T$_c$ superconducting Josephson junctions has been prepared by Ar ion beam etching and electron beam lithography. YBa$_2Cu_3O_{7-x}$ (YBCO) films deposited on (001) SrTiO$_3$ single crystal substrate by pulsed laser deposition were patterned by Ar ion milling with photolithography. The narrow slit with a electroresist mask, about 1000 ${\AA}$ wide, was constructed over a 3 ${\sim}$ 5 ${\mu}$m bridge of a 1200-${\AA}$-thick YBCO film by electron beam lithography. The slit was then etched by the Ar ion beam to form a damaged 600-${\AA}$-thick YBCO. Thus prepared structure forms an S-N-S (YBCO - damaged YBCO - YBCO) type Josephson junctions. Those junctions exhibit RSI-like I-V characteristics at 77 K. The properties of the Josephson junctions such as I$_c$ R$_N$, and J$_c$ were characterized.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.111-115
• /
• 2003

200nm 정도의 두께를 가진 SBT 박막이 liquid delivery MOCVD 공정에 의해 (111) oriented Pt/Ti/$SiO_2$/Si 기판 위에 증착되었다 이 실험에서는 $Sr(TMHD)_2$tetraglyme, $Bi(ph)_3$ 그리고 $Ta(O^iPr)_4$(TMHD)를 출발 물질로 사용하였다. Sr 출발 물질의 열적 안정화를 위해서 adduct로 tetraglyme를 사용하여 실험하였고 유기 용매로는 n-butyl acetate를 사용하였다 Substrate temperature와 reactor pressure는 각각 $570^{\circ}C$와 5Torr로 유지시켰다. 또한 vaporizer의 용도는 $190-200^{\circ}C$, 그리고 delivery line 의 온도는 vaporizer 보다 높게 유지 $(220-230^{\circ}C)$하여 출발 용액을 분당 0.1ml로 50분간 주입하였다. 수송가스로 Ar, 산화제로 $O_2$ 가스를 사용하였다. 제조한 SBT 박막은 $750^{\circ}C$에서 열처리한 후 인가전압 3V와 5V에서 $2P_r$값이 각각 6.47, $8.98{\mu}C/cm^2$이었으며, $2E_c$값은 인가전압 3V와 5V에서 각각 2.05, 2.31V이었다 그리고 $800^{\circ}C$에서는$750^{\circ}C$에서 열처리한 SBT 박막보다 다소 우수한 이력특성을 나타내어 $2P_r$ 값은 인가전압 3V와 5V에서 각각 7.59, $10.18{\mu}C/cm^2$ 이었으며, $2E_c$값은 인가 전압 3V와 5V에서 각각 2.00, 2.21V 이었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.817-820
• /
• 2004

The $Sr_{0.7}Bi_{2.6}Ta_2O_9$(SBT) thin films are deposited on Pt-coated electrode($Pt/TiO_2/SiO_2/Si$) using a RF magnetron sputtering method. The ferroelectric properties of SBT capacitors with annealing time were studied. In the SEM images, Bi-layered perovskite phase was crystallized at 10min and grains largely grew with annealing tune. SBT thin films are transformed from initial amorphous phase to the fully formed layer-structured perovskite. During the annealing process at $750^{\circ}C$, we found that an fluorite-like stage is formed after 3min. In the XRD pattern, the SBT thin films after 3min annealing time had (105) orientation. The ferroelectric properties of SBT capacitor with annealing time represent a favorable properties at 60 min. The maximum remanent polarization and the coercive electric field with 60 min are $12.40C/cm^2$ and 30kV/cm, respectively. The leakage current density with 60min is $6.81{\times}10^{-10}A/cm^2$.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.86-91
• /
• 1999

We have fabricated high-$\textrm{T}_c$ superconducting $\textrm{YBa}_{2}\textrm{Cu}_{3}\textrm{O}_{7-x}$(YBCO) grain boundary junctions at a step-edge on (001) $\textrm{SrTiO}_3$(STO) substrates. A diamond-like carbon (DLC) film grown by plasma enhanced chemical vapor deposition were used as an ion milling mask to make steps on the STO (100) single crystal and was removed by an oxygen reactive ion etch process. The c-axis oriented YBCO and TO thin films were deposited epitaxially on the STO substrate with a step-edge by pulsed laser deposition. The grain boundary junctions were formed at the top and the bottom of the step. The junctions worked at temperatures above 77 K, and had I\ulcornerR\ulcorner products of 7.5mV at 16K and 0.3 mV at 77K, respectively. The I-V characteristics of these junctions showed the shape of the two noisy resistively shunted junction model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1061-1067
• /
• 2004

In this study, ferroelectric (Ba,Sr)TiO$_3$ and high temperature superconductor YBCO thin films were fabricated by PLD (Pulsed Laser Deposition) method and tuneable bandstop filters were implemented with two different IDC(Interdigital Capacitance) gap patterns, 20${\mu}{\textrm}{m}$ and 30${\mu}{\textrm}{m}$ using these two thin film layers. The resonant frequency was changed by DC bias voltage. By comparing measured results with simulation, the dielectric properties of ferroelectric thin film have been extracted. The permittivity was 820 ～ 900 at 30 K and had an acceptable error range but the loss tangent had a great difference, 0.018 in 30${\mu}{\textrm}{m}$ IDC gap pattern and 0.037 in 20 ${\mu}{\textrm}{m}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.477-477
• /
• 2008

For more than three decades, the gate dielectrics in CMOS devices are $SiO_2$ because of its blocking properties of current in insulated gate FET channels. As the dimensions of feature size have been scaled down (width and the thickness is reduced down to 50 urn and 2 urn or less), gate leakage current is increased and reliability of $SiO_2$ is reduced. Many metal oxides such as $TiO_2$, $Ta_2O_4$, $SrTiO_3$, $Al_2O_3$, $HfO_2$ and $ZrO_2$ have been challenged for memory devices. These materials posses relatively high dielectric constant, but $HfO_2$ and $Al_2O_3$ did not provide sufficient advantages over $SiO_2$ or $Si_3N_4$ because of reaction with Si substrate. Recently, $HfO_2$ have been attracted attention because Hf forms the most stable oxide with the highest heat of formation. In addition, Hf can reduce the native oxide layer by creating $HfO_2$. However, new gate oxide candidates must satisfy a standard CMOS process. In order to fabricate high density memories with small feature size, the plasma etch process should be developed by well understanding and optimizing plasma behaviors. Therefore, it is necessary that the etch behavior of $HfO_2$ and plasma parameters are systematically investigated as functions of process parameters including gas mixing ratio, rf power, pressure and temperature to determine the mechanism of plasma induced damage. However, there is few studies on the the etch mechanism and the surface reactions in $BCl_3$ based plasma to etch $HfO_2$ thin films. In this work, the samples of $HfO_2$ were prepared on Si wafer with using atomic layer deposition. In our previous work, the maximum etch rate of $BCl_3$/Ar were obtained 20% $BCl_3$/ 80% Ar. Over 20% $BCl_3$ addition, the etch rate of $HfO_2$ decreased. The etching rate of $HfO_2$ and selectivity of $HfO_2$ to Si were investigated with using in inductively coupled plasma etching system (ICP) and $BCl_3/Cl_2$/Ar plasma. The change of volume densities of radical and atoms were monitored with using optical emission spectroscopy analysis (OES). The variations of components of etched surfaces for $HfO_2$ was investigated with using x-ray photo electron spectroscopy (XPS). In order to investigate the accumulation of etch by products during etch process, the exposed surface of $HfO_2$ in $BCl_3/Cl_2$/Ar plasma was compared with surface of as-doped $HfO_2$ and all the surfaces of samples were examined with field emission scanning electron microscopy and atomic force microscope (AFM).