• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.187-197
• /
• 1999

해양수산부가 개발 .운영 중인 항만운영정보시스템(PORT-MIS)은 선박입출항 관련 업무, 수출입 화물 반출입에 관한 업무, 항만시설물관리에 관한 업무, 의사결정지원시스템에 관한 업무 등 크게 4개 업무오 구성되어 있으며, 총 19개의 전자문서와 1,500여개의 단위 프로그램으로 구성되어 있다. 그동안 PORT-MIS를 권역별로 확대 운영하면서 발생한 여러 가지 문제점들을 보완하기 위해 해양수산부와 정보통신부(한국전산원)가 공동으로 $\ulcorner$수출입화물 일괄처리시스템 구축$\lrcorner$ 용역 사업을 현재 진행 중에 있다. 본 연구는 용역과업 내용에 포함되어 있지 않으면서 개선이 필요한 외항선(국전선.외국전선 포함) 선박입항보고서(최초.변경.최종)와 선박출항보고서(최초.변경.최종), 내항선입.출항신고서, 예선사용허가신청서 및 지정서, 도선사용허가신청서 및 지정서 등의 민원업무를, 사용자로 하여금 최소한의 노력으로 처리할 수 있도록 제출방법을 개선(EDI방식에서 온라인방식으로)하여 행정소요시간을 단축함으로써 PORT-MIS의 효율성을 높일 수 있는 방안을 제시하고자 한다. 이러한 노력을 통해 PORT-MIS EDI업무가 개선되어 선박입.출항보고를 1회롤 처리할 수 있다면 연간 29만9천건의 서류절감으로 약 1억3천7백만원의 물류비를 줄일 수 있으며, 시간 단축에 따른 간접비용을 계산하면 보다 많은 효과가 있다고 판단된다. 그리고 내항선입.출항신고서 및 예.도선업무를 EDI방식에서 온라인방식으로 전환함으로써 선사와 예선업체 및 도선사협회가 대화형식으로 업무처리가 이루어져 분쟁을 최소화 할 수 있다면, 전자문서 31만6천건/년 절감으로 1억3백만원/년의 예산이 절감될 것으로 예상된다.rr로 변화시켰고 inductive power는 200~800watt, bias voltage는 0~-200voltage로 변화시켰으며 식각마스크로는 SiO2를 patterning 하여 사용하였다. n-GaN, p-GaN 층 이외에 광소자 제조시 필수적인 InGaN 층을 100% Cl2로 식각한 경우에 InGaN의 식각속도가 GaN에 비해 매우 낮은 식각속도를 보였다. Cl2 gas에 소량의 CH4나 Ar gas를 첨가하는 경우와 공정압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%Ar 플라즈마에서 공정 압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%CHF3 와 Cl2/10%Ar 플라즈마에서 공정압력을 15mTorr로 감소시키는 경우 InGaN과 GaNrks의 선택적인 식각이 가능하였다. InGaN의 식각속도는 Cl2/Ar 플라즈마의 이온에 의한 Cl2/CHF3(CH4) 플라즈마에서의 CHx radical 형성에 의하여 증가하는 것으로 사료되어 진다.$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.1061-1070
• /
• 2023

Over the last few years, lead-free inorganic metal perovskites have gained impressive ground in empowering satellites in space exploration owing to their material stability and performance evolution under extreme space environments. The present work has examined the versatility of eight such perovskites as space radiation shielding materials by computing their photon, charged particles and neutron interaction parameters. Photon interaction parameters were calculated for a wide energy range using PAGEX software. The ranges of heavy charged particles (H, He, C, N, O, Ne, Mg, Si and Fe ions) in these perovskites were estimated using SRIM software in the energy range 1 keV-10 GeV, and that of electrons was computed using ESTAR NIST software in the energy range 0.01 MeV-1 GeV. Further, the macroscopic fast neutron removal cross-sections were also calculated to estimate the neutron shielding efficiencies. The examined shielding parameters of the perovskites varied depending on the radiation type and energy. Among the selected perovskites, Cs₂TiI₆ and Ba₂AgIO₆ displayed superior photon attenuation properties. A 3.5 cm thick Ba₂AgIO₆-based shield could reduce the incident radiation intensity to half its initial value, a thickness even lesser than that of Pb-glass. Besides, CsSnBr₃ and La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ displayed the highest and lowest range values, respectively, for all heavy charged particles. Ba₂AgIO₆ showed electron stopping power (on par with Kovar) better than that of other examined materials. Interestingly, La_0.8Ca_0.2Ni_0.5Ti_0.5O₃ demonstrated neutron removal cross-section values greater than that of standard neutron shielding materials - aluminium and polyethylene. On the whole, the present study not only demonstrates the employment prospects of eco-friendly perovskites for shielding space radiations but also suggests future prospects for research in this direction.

• Ultrasonography
• /
• v.32 no.1
• /
• pp.59-65
• /
• 2013

Purpose: The purpose of this study is to establish the methodology regarding synthesis of ultrasound contrast agent imaging, and to evaluate the characteristics of the synthesized ultrasound contrast agents, including size or degradation interval and image quality. Materials and Methods: The ultrasound contrast agent, composed of liposome and SF6, was synthesized from the mixture solution of $21{\mu}mol$ DPPC (1, 2-Dihexadecanoyl-sn-glycero-3-phosphocholine, $C_{40}H_{80}NO_8P$), $9{\mu}mol$ cholesterol, $1.9{\mu}mol$ of DCP (Dihexadecylphosphate, $[CH_3(CH_2)_{15}O]_2P(O)OH$), and chloroform. After evaporation in a warm water bath and drying during a period of 12-24 hours, the contrast agent was synthesized by the sonication process by addition of buffer and SF6 gas. The size of the contrast agent was controlled by use of either extruder or sonication methods. After synthesis of contrast agents, analysis of the size distribution of the bubbles was performed using dynamic light scattering measurement methods. The degradation curve was also evaluated by changes in the number of contrast agents via light microscopy immediate, 12 hours, 24 hours, 36 hours, 48 hours, 60 hours, 72 hours, and 84 hours after synthesis. For evaluation of the role as an US contrast agent, the echogenicity of the synthesized microbubble was compared with commercially available microbubbles (SonoVue, Bracco, Milan, Italy) using a clinical ultrasound machine and phantom. Results: The contrast agents were synthesized successfully using an evaporation-drying-sonication method. The majority of bubbles showed a mean size of 154.2 nanometers, and they showed marked degradation 24 hours after synthesis. ANOVA test revealed a significant difference among SonoVue, synthesized contrast agent, and saline (p < 0.001). Although no significant difference was observed between SonoVue and the synthesized contrast agent, difference in echogenicity was observed between synthesized contrast agent and saline (p < 0.01). Conclusion: We could synthesize ultrasound contrast agents using an evaporation-drying-sonication method. On the basis of these results, many prospective types of research, such as anticancer drug delivery, gene delivery, including siRNA or microRNA, targeted molecular imaging, and targeted therapy can be performed.

• Journal of Sensor Science and Technology
• /
• v.20 no.5
• /
• pp.317-321
• /
• 2011

A Micro platform for micro gas sensor consisted of micro heater, insulator, and sensing electrode on 2 ${\mu}m$ thick $SiN_x$ membrane. Three types of micro platforms were designed and fabricated with membrane sizes. Total size of micro platform was 2.6 mm by 2.6 mm. Measured power consumptions were 28 mW, 28 mW, and 32.5 mW for Type 1, Type 2, and Type 3. At this moment, temperatures of membranes on the platforms were $295^{\circ}C$, $297^{\circ}C$, and $296^{\circ}C$, respectively. Fabricated micro platform considered appropriate to apply for low power consumption micro gas sensor. Micro gas sensors were prepared by the sequence that $SnO_2$ nanopowder pastes were dropped on membrane of Type 1 platforms, dried in oven, heat-treated with micro heaters in platforms. One of the micro gas sensors was tested for gas response to 1157 ppm, 578 ppm, and 231 ppm of methane and 1.68 ppm, 0.84 ppm, and 0.42 ppm of $NO_2$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.105.2-105.2
• /
• 2011

화비정질 실리콘의 빛에 의한 노화현상 (light-induced degradation; LID)은 이미 1977년 보고된 Staebler-Wronski 효과에 의해서 확인된 바 있다. 이는 비정질 실리콘이 빛에 노출될 때, 이미 포함되어 있는 수소원자가 빛 에너지에 의해서 이동하게 되고, 이로 인해서 생성 또는 소멸되는 댕글링 본드 때문에 일어난다. 특히, 일상적인 태양광의 노출 하에서 태양전지의 장시간 성능을 예측하는데 물리적인 이해의 부족 및 기술 환경적인 어려움이 있고, 이러한 요인들은 안정된 태양전지를 개발하는데 장해요인으로 나타난다. 그러므로 비정질 실리콘 태양전지가 장시간 태양광에 노출되어 시간이 지남에 따라서 "성능이 어떻게 변하는지?" 그리고 "이에 대한 원인은 무엇인지?" 등은 여전히 과학적으로 풀어야할 숙제로 남아있다. 본 논문에서는 비정질 실리콘으로 구성된 태양전지가 태양광에 노출될 때 시간이 지남에 따라서 (1) 성능이 어떻게 변하는지, (2) LID의 변화는 언제 안정화되는지, 그리고 (3) 성능변화에 대한 원인은 무엇인지에 대해서 논의한다. 본 논문은 장시간 빛에 노출되는 비정질 실리콘 태양전지의 성능예측에 관해서 연구하였다. 결함밀도의 운동학적 모형을 통해서 태양광 노출에 대한 태양전지 성능변화를 예측하는데 초점을 맞추었고, 이를 위해서 태양전지에 조사되는 태양광 세기, 주변온도, 등이 고려되었다. 특히, 전하운반자의 수명이 결함밀도에 의해서 결정되기 때문에 비정질 실리콘 태양전지의 빛에 대한 노화현상 (LID)이 확장지수함수 (stretched-exponential) 완화법칙을 따르는 결함밀도에 의해서 물리적으로 설명된다. 한편 이와 같은 물리적 계산의 유용성을 확인하기 위해서 동일한 태양전지에 대해서 AMPS-1D 컴퓨터 프로그램을 사용하였고, 이를 통해서 비정질 실리콘 태양전지의 빛에 대한 노화현상을 물리적 및 정량적으로 이해하였다. 본 연구에 적용되는 태양전지는 비정질 실리콘으로 구성된 pin 구조 (glass/$SnO_2$/a-SiC:H:B/a-Si:H/a-Si:H:P/ITO)로서 다음과 같은 특성을 갖는다: 에너지 띠간격~1.72 eV, 두께~400 nm, 내부전위~1.05 V, 초기 fill factor~0.71, 초기 단락전류~16.4 mA/$cm^2$, 초기 개방전압 0.90 V, 초기 변환효율 10.6 %. 우리는 이와 같은 연구를 통해서 과학적으로 비정질 실리콘의 빛에 의한 노화현상을 이해하고, 기술적으로 효율 및 경제성이 높은 태양전지의 개발에 도전한다.

• Economic and Environmental Geology
• /
• v.23 no.1
• /
• pp.35-57
• /
• 1990

This study has been carried out on the Pegmatites, Naedeogri Granites, Nonggeori Granites and Metasedimentary rocks in the middle area of Taebaeksan region to investigate the geochemical properties and possibility of productivity. Pegmatites are characterized by metamorphosed anatectic pegmatite and differentiated magmatic pegmatite, and are mixed type of rare-element pegmatite and mica-bearing pegmatite by the classification of Ginsburg(1979). The petrological type of the igneous rocks is thought to be calcalkali, subalkaline and peralumious. According to chemical variations against D. I., differentiation trends from Naedeogri and Nonggeori Granites through non-mineralized pegmatites to mineralized pegmatites are supposed. From the relationship between oxided and $SiO_2$, pegmatites and Nonggeori Granite have shown similar tendencies and bulk composition of pegmatites and similar to metasedimentary rocks near the intrusives. By judging the correlations of trace elements, it is elucidated that pegmatites adjacent to Naedeogri and Nonggeori Granites have been originated in magma differentiation from these granites and the others have been differentiated by remelting or partial melting from metasedimentary rocks. $Sp_5$, $Sp_8$, and $Sp_9$ pegmatites are considered as productive rocks, and $Sp_4$, $Sp_6$, $Sp_7$, $Sp_{10}$, $Sp_{11}$, and $Sp_{12}$ pegmatites and granites are supposed to have a weak productivity, in terms of element ratios related with Sn mineralizations. Tourmalines in productive pegmatites are formed under the circumstance of Li-poor granitoids and associated with pegmatites, and the others are seemed to be originated in metapelites and metapsammites which are not coexisting with an Al-saturating phase. Three types of chemical zoning are noticed in tourmalines: (1) apparently homogeneous compositional patterns, (2) a continuous core-to-rim zoning and, (3) a discontinuous core-to-rim zoning. From results of EPMA of tourmalines, Al, Mg and Ca increase closer to rim, while Fe decreases.

• Economic and Environmental Geology
• /
• v.12 no.2
• /
• pp.79-93
• /
• 1979

Twenty five samples of the scheelite-powellite series from twelve Korean tungsten deposits of various geologic settings were studied mineralogically and geochemically. Variations in the trace-element contents of the scheelite minerals are considered in relation to geologic settings and mineralogic properties. Scheelites from ore deposits developed in similar geologic settings and under similar physicochemical conditions are characterized by specific combinations of trace elements.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.1
• /
• pp.39-51
• /
• 2001

공주군 유구면 일대의 화강암질 편마암의 풍화작용에 따른 원소의 거동과 pH와 이차광물과의 관계를 XRF, ICP-AES, ICP-MS를 이용한 원소분석결과를 통하여 검토하였다. 이 지역의 암석은 pH6 내외의 산성환경, 침철석, 아나타제와 같은 다양한 이차광물을 생성하면서 심각한 화학조성의 변화를 초래했다. 주원소의 화학조성을 이용한 풍화지수는 토양층에서 79~88로 모암 중의 사장석이 용해되고 흑운모가 변질되어 캐올리광물의 생성이 활발한 방향으로 풍화작용이 진행되었다. 지표층으로 가면서 Al에 대한 주 원소의 거동은 Si, Ca, Na, K, P가 감소하고 Fe, Ti, Mn이 증가하는 경향을 보이며 pH가 낮은 풍화단면에서 주 원소의 변화량이 더 크다. 이 풍화대에서 Mg은 거의 일정하다. Li, As 모든 전이원소는 pH가 감소함에 따라 증가하며 특히 이들 원소는 Fe의 함량과 비례해서 증가해 침철석과 공침하였거나 표면에 흡착되어 있는 것으로 보인다. Ga은 Fe와 비례하기는 하지만 변화량은 전 풍화단면에서 일정하다. Zr, Mo, Sn, Cd은 pH에 변화에 상관없이 일정한 반면에 Rb, Sr, Ba, Y, Pb, Th, U 등은 감소하는 경향을 보인다. 특히 Rb 과 Sr은 Ca에 비례해서 감소한다. 희토류원소는 전 풍화단면에서 감소하는 경향을 보이는데 $Al_2$$O_3$에 대한 상대적인 변화량을 보면 경희토류원소는 사프롤라이트(saprolite)하부와 상부에서 부화되어 있고 중부 사프롤라이트와 토양층에서 감소하는 반면에 중희토류원소는 사프롤라이트 하부와 상부에서 감소하고 중부사프롤라이트 및 토양층에서 부화되는 경향을 보인다. 전반적으로 희토류원소의 원자번호가 클수록 손실율이 커진다. 이 풍화단면에서 원소의 거동은 각 풍화층의 pH와 생성된 이차광물의 조성에 지배를 받았다.

• Conservation Science in Museum
• /
• v.30
• /
• pp.23-46
• /
• 2023

The Jija Chongtong Gun, owned by Seokdang Museum of Dong-A University, is a tubedstyle heavy weapon of the battlefield in the mid-Joseon Dynasty and is the second largest firearm after Cheonja Chongtong. The original surface color of the Jija Chongtong Gun was obscured by foreign substances and therefore it was judged that its condition requires the conservation treatment. For stable conservation treatment, gamma ray and X-ray non-destructive transmission surveys was conducted to determine the internal structure and conservation condition. And the component analysis on the material components and surface contaminants of Jija Chongtong Gun was conducted by utilizing the p-XRF component analysis, SEM-EDS component analysis, and XRD analysis. As a result of the gamma-ray and X-ray non-destructive transmission investigation, a large amount of air bubbles was observed inside Jija Chongtong Gun, and the part that appeared to be a chaplet by visual observation was not identified. As a result of gamma-ray and p-XRF component analysis, it was confirmed that Jija Chongtong Gun was bronze made of copper (Cu), tin (Sn), and lead (Pb) alloy. As a result of surface analysis of foreign substances using SEM-EDS, it was confirmed that the main components of white foreign substances were calcium (Ca), sulfur (S), and titanium (Ti). Titanium was presumed to be titanium dioxide (TiO₂), the main component of white correction fluid. The red foreign substance was confirmed to contain barium (Ba) as its main ingredient, and was presumed to be barium sulfate (BaSO₄), an extender pigment in paint. White and red contaminants, mainly composed of titanium and barium, are presumed to have been deposited on the surface in recent years. The yellow foreign substances were confirmed to be aluminum (Al) and silicon (Si), and were presumed to have originated from soil components. As a result of SEM-EDS and XRD component analysis, the white foreign substance was confirmed to be gypsum (CaS). Based on the results of component analysis, surface impurities were removed, stabilization treatment, and strengthening treatment were performed. During the conservation process, unknown inscriptions Woo (右), Byeong (兵), Sang (上), and Yi (二) were discovered through a portable microscope and precise 3D scanning. In addition, the carving method, depth, and width of the inscription were measured. Woo Byeong Sang is located above Happo Fortress in Changwon, and Yi can be identified as the second hill.

• Economic and Environmental Geology
• /
• v.22 no.1
• /
• pp.35-63
• /
• 1989

Geochemical characteristics of the Guryongsan (Ogcheon) uraniferous black slate show that this is an analogue to the conventional Chattanooga and Alum shales in occurrences. Whereas, its highest enrichment ratio in metals including uranium, among others, is explained by the cyclic sedimentation of the black muds and quartz-rich silts, and the uniform depositional condition with some what higher pH condition compared to the conditions of the known occurrences. The cyclic sedimentation, caused by the periodic open and close of the silled basin, has brought about the flush-out) of the uranium depleted water and the recharge with the new metal-rich sea water, which consequently contributed to the high concentration of metals in mud. The metal-rich marine black muds, which mostly occur in the early to middle Palaeozoic times, is attributed by the geologic conditions which related to the atmospheric oxygen contents, and these are scarcely met in the late Precambrian and/or with the onset of Palaeozoic era in the geologic evolution of the earth.