• Journal of Microbiology
• /
• 제39권4호
• /
• pp.338-342
• /
• 2001

Pseudomonas fluorescens SM11 is a naphthalene-degrading strain whose dissimilatory genes are cho-mosomally encoded. We have cloned the 2.9 kb Sal I fragment harboring genes for the naphthalene-degrading upper pathway. The nucleotide sequences were determined to be nahQ, napA, and partial regions of nahE genes. The nahQ encods a protein of 188 amino acid residues with a deduced molec-ular wight of 20.8kDa. The high homology with other proteins suggests that NAhQ may be an active and useful protein whtich gives as selective advantage to naphthalene degradatin. Transposase(TnpA)encodes a polypetide chain with a molecular mass of 41.8kDa consisting of 376 amino acid residues. The deduced anino acid sequence of tnpA revealed 96% idenitity with putative transposase of P. stutzeri OX1,. It was assumed that transposase plays an important role in the evloution of the catabloic-path way in the regulation of nah expression.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.98-107
• /
• 1996

In order to predict analytically torque, thrust force, tool life and chip formation in drilling, cutting models for chisel edge with various tool-chip contact length were developed in this type. Also, the experimental tests are run with various pilot holes. The following conclusions were obtained from the analysis. \circled1 It's also found experimentally that thrust force(Fz) decreases as pilot hole diameter increases. \circled2 Surface roughness for material(G) is larger that for material(J). The difference over two materials in roughness value about 0.5$mu extrm{m}$. \circled3 Flank wear of the drill in cutting material of G less than any other kinds of materials(F, G, H, I, J). \circled4 In drilling a deep hole on a workpiece over SM45C either twist drill. The chip was conical helix type at the fist suspensely change the two segment type and than two a long pitch helix style.

• 한국축산식품학회지
• /
• 제37권5호
• /
• pp.716-725
• /
• 2017

The objective of this study was to determine the relationship between composition of muscle fiber types and meat quality traits of eight major muscles from Hanwoo steers. Longissimus lumborum (LL), psoas major (PM), semimembranosus (SM), semitendinosus (ST), gluteus medius (GM), triceps brachii (TB), rectus abdominis (RA) and superficialis flexor (SF) muscles were obtained from 9 Hanwoo steers and subjected to histochemical analysis. There were significant (p<0.05) differences in fiber number percentage (FNP) and fiber area percentage (FAP) of fiber types among these 8 major muscles. SF had the highest FNP of type I (55.9%), followed by PM (46.4%), TB (45.4%), RA (38.5%), LD (36.8%), GM (36.0%), SM (22.2%), and ST (18.8%). FAP of type IIB ranged from 9.9% in SF to 58.7% in ST. Meat quality traits, including fat content, myoglobin content, collagen content, CIE $L^*$ and $a^*$, drip and cooking loss, sarcomere length and Warner-Bratzler shear force, were all significantly (p<0.05) different among these muscles. Due to such diversities among these 8 muscles, lack of correlations were found between fiber type composition and meat quality traits. These results suggest that correlation for each individual muscle should be used to improve meat quality and profitability of retail beef cuts.

• 한국대기환경학회지
• /
• 제4권2호
• /
• pp.1-10
• /
• 1988

Brookhaven 의학연구용 원자로에서 방출되는 기체분출물에 관하여 연구 되었다. 모든 기체시료는 $\gamma$-선 분광계측에 의하여 분석되었다. 시료 중에 존재하는 것으로 확인된 핵종으로서, $^{82}Cl(T_{1/2}$ = 35.30 시간) 이 가장 뚜렷하였다. 그 외의 확인된 핵종은 $^{38}Cl(T_{1/2}$ = 37.24분), $^{41}Ar(T_{1/2}$ = 1.82시간), $^{106}Rh(T_{1/2}$ = 29.80묘), $^{133}Te(T_{1/2}$ = 12.45분)이었다. 3MW 원자로 출력에서 pre-filter bank를 통과한 기체분출물 중에서 $$^{41}Ar$의 농도는 2.436Bq/cc로 계산됨으로써 $^{41}Ar$의 방사능 방출율은 8.51 ${\times}10^9$Bq/MW - h로 산정되었다. filter bank의 방사능 원거효율(%)은 $^{38}Cl$의 경우 97.84%, $^{41}Ar$은 14.15%, ^{82}Br$은 98.70% 그리고 $^{106}Rh$은 98.81% 각각 산정되었다. 한편, charcoal trap과 millipore filter 에서 확인된 기타 핵종들로서 $^{24}Na$, $^{72}Ga$, $^{92}Sr$, $^{97}Zr$, $^{132}I$, $^{133}Te$, $^{141}Ce$, $^{153}Sm$과 $^{154}Pm$은 filter bank에 의해서 완전히 제거되었다.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.109-114
• /
• 2020

This work presents the results of laboratory scale tests of the CARBOFLUOREX (CARBOnate FLUORide EXtraction) process - a novel technology for the recovery of U and Pu from the solid fluorides residue (fluorination ash) of Fluoride Volatility Method (FVM) reprocessing of spent nuclear fuel (SNF). To study the oxidative leaching of U from the fluorination ash (FA) by Na₂CO₃ or Na₂CO₃-H₂O₂ solutions followed by solvent extraction by methyltrioctylammonium carbonate in toluene and purification of U from the fission products (FPs) impurities we used a surrogate of FA consisting of UF₄ or UO₂F₂, and FPs fluorides with stable isotopes of Ce, Zr, Sr, Ba, Cs, Fe, Cr, Ni, La, Nd, Pr, Sm. Purification factors of U from impurities at the solvent extraction refining stage reached the values of 10⁴-10⁵, and up to 10⁶ upon the completion of the processing cycle. Obtained results showed a high efficiency of the CARBOFLUOREX process for recovery and separating of U from FPs contained in FA, which allows completing of the FVM cycle with recovery of U and Pu from hardly processed FA.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.1-4
• /
• 2007

The total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcinations process and XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcinations was improved to be 2.8um by applying slot-die coating method. In particular, addition of Samarium shows critical current of $I_c=273A/cm-w(J_c=3.8MA/cm^2)$. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solution in MOD process.

• 대한약리학회지
• /
• 제32권1호
• /
• pp.113-123
• /
• 1996

세포내 polyamine은 DNA 구조 뿐 아니라 전사과정, 세포의 성장, 분화, 및 증식 등에 간여하는 바, 배양 흉선세포의 apoptosis 을 억제한다고 한다. 따라서 dexamethasone에 의한 생쥐 흉선세포의 apoptosis 반응에 대한 polyamine의 억제작용을, polyamine 생성과 대사억제제들로 처치한 흉선세포의 일차배양실험에서 관찰하여, 그 결과를 A23187과 DHEA의 작용과 비교하였다. 1) 흉선세포 생존율이 dexamethasone, DHEA, A23187, DFMO, MGBG들에 의하여 직접 현저히 억제되며, aminoguanidine, putrescine, spermidine, 및 spermine들에 의해서는 영향을 받지 않았다. 2) 흉선세포 DNA의 분절화가 dexamethasone과 A2318T에 의하여 유의하게 증강되어 있으며 DHEA에 의하여도 다소 증가되었으나, DFMO, MGBG, aminoguanidine, putrescine, spermidine, 및 spermine들에 의하여는 크게 영향을 받지 않았다. 3) Dexamethasone에 의한 흉선세포의 apoptosis는 DHEA에 의하여 억제된 반면, DFMO, MGBG, 및 aminoguanidine에 의하여는 영향을 받지 않았다. Spermine은 dexamethasone과 A23187에 의한 세포생존율 감소를 유의하게 억제하였으며, A23187에 의한 세포생존율 감소는 putrescine과 spermidine에 의하여도 억제되는 경향을 보였다. 4) DFMO 및 MGBG에 의한 흉선세포 생존율 감소는 spermine에 의해 현저히 억제되었으나, putrescine과 spermidine에 의하여는 영향을 받지 않았다. 5) Dexamethasone을 DFMO 또는 MGBG와 병합처치하여 나타나는 흉선세포 생존율 감소는 각각 spermine과 putrescine에 의하여 유의하게 억제되었으나, aminoguanidine 또는 DHEA와 dexamethasone의 병합처치에 의한 생존율 감소는 polyamine 전처치에 의해 감소되지 않았다. 이상의 결과는 polyamine이 흉선세포의 apoptosis 반응을 억제할 수 있고, 이같은 억제효과의일부가 $[Ca^{2+}]_i$ 증가에 관련되는 신호전달과정과 연관될 뿐 아니라, 세포막의 polyamine transporter를 통한 polyamine 섭취가 이들의 생합성 또는 유리기능과 함께 세포내 polyamine 함량을 조정하므로, 흉선세포의 apoptosis에 억제적으로 작용할 수 있음을 시사하는 것으로 사료된다.

• 한국수자원학회논문집
• /
• 제33권1호
• /
• pp.39-50
• /
• 2000

일반적으로 동수역학 모형은 마찰인자(조도계수 또는 Chezy계수)와 와점성계수를 필요로 하고 수치계산에서 이들 계수의 갑은 통상 가정 또는 반복계산을 통하여 결정된다. 수치모형에서 와점성계수는 물리적인 확산뿐만 아니라 수치점성의 효과도 가지고 있어서 수치계산의 안정성에 영향을 미치므로 이들 계수의 일관된 결정방법이 필요하다. 수위 및 유량자료, 1차원 모형인 HEC-2와 NETWORK, 2차원 모형인 SMS를 이용하여 한강하류 구간에 대한 조도계수의 산정결과와 와점성 계수의 산정식이 제시되었으며 실측수위와 비교를 통해 검증되었다.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1995

Fatigue tests were carried out by a rotary bending testing machine of cantilever type. M.E.F.(ferrite encapsulated islands of martensite) materials were made by a series of heat treatment from a low carbon steel(SM 20 C). The fatigue tests were conducted at stress levels of 302 MPa and with frequencies of 25Hz, 2.5 Hz and 0.5 Hz in 3% NaCl solution. The fatigue strength increased with frequency got higher. The microcracks and corrosion pits were generated at the boundary between the matrix and the 2nd phase. The cracks generated by the corrosion pits were coalesced with the pits around the notch and became the initial crack. The $N_i/N_f$ ratio increased as the frequency and stress level decreased. The interference phenomenon increased with stress level and frequency gots higher. The crack propagation rate was delayed as the stress level lowers and the frequency gets higher, however, the range of the stress intensity factor depended only on a stress level.

• Journal of Welding and Joining
• /
• 제6권4호
• /
• pp.27-34
• /
• 1988

The objective of this paper is to investigate the effect of residual stress on fatigue crack growth behavior. For this purpose, submerged arc welding was performed on SM50A steel plate and post weld heta treatment (PWHT) was followed. Residual stress distribution on the weld plate was determined by a hole drilling method and a series of .DELTA.P-const. and .DELTA.K-decreasing fatigue test were performed on the three different regions, i.e. weld metal, HAZ and base metla. Following conclusins were achieved. 1. In "as welded" specimens, tensile residual stresses were produced in the center portion of the specimen while compressive residual stresses were produced near the edges. In PWHT specimens, however, most of the residual stresses were disappeared. 2. The fatigue crack growth behavior in low .DELTA.K region was considerably affected by the presence of residual stress in both "as welded" and PWHT specimens. 3. Because of the relaxation of residual stresses in PWHT condition, the values of m increased from 2.62-2.78 (in the "as welded" condition) to 3.57-3.91 (in the "PWHT" condition)3.91 (in the "PWHT" condition)condition)