• 제목/요약/키워드: $SiO_2/K_2CO_3$

검색결과 575건 처리시간 0.023초

Purification of Iron Oxides and Application to Magnetic Hard Ferrite

  • Kim, Jeong-Seog;Chou, Kyoung-Ho;Kim, Jai-Young
    • The Korean Journal of Ceramics
    • /
    • 제2권3호
    • /
    • pp.125-130
    • /
    • 1996
  • Hematite iron ore and waste iron oxide sludge containing about 3-5 wt% $SiO_2$ were purified by three types of method developed on the basis of the Bayer process which is known as the purification process of bauxite ore. The basic principle of the developed methods lies in the fact that the impurities contained in the iron oxides, such as $SiO_2$ and $Al_2O_3$ are soluble in the alkaline reagents. Reaction of the raw materials with KOH was done in pressure vessel, at atmospheric pressure, and by both of these two. By the pressure vessel method $SiO_2$ content was reduced to below 0.5 wt% in the waste iron oxide sludge, while, in iron ore, $SiO_2$ remained at 2-3 wt%. The atmospheric pressure reaction rendered the waste iron oxide sludge $SiO_2$ content below 0.5wt% when the reaction temperature increased to above 90$0^{\circ}C$. The combined method of two previous methods was the most effective process and rendered the refined iron oxide about 300-400ppm of $SiO_2$. Using some refined iron oxides, Ba-ferrite was produced and magnetic properties were measured. The highest quality of magnetic properties obtained in this study were Br=2.09 G, bHc=1.99 KOe, iHc=4.54 KOe, $(BH)_{max}$=1.06 MGOe. Effect of sintering condition and chemical composition will be discussed.

  • PDF

제주도 신양리층에서 산출하는 Motukoreaite와 Quintinite (Motukoreaite and Quintinite-3T from Sinyangri Formation, Jeju Island, Korea)

  • 정기영
    • 한국광물학회지
    • /
    • 제22권4호
    • /
    • pp.307-312
    • /
    • 2009
  • 제주도의 화산쇄설성 퇴적암인 신양리층에서 산출되는 motukoreaite와 quintinite-3T를 보고한다. 두 광물은 Mg-Al 층상복수산화물로서 현무암 유리질 입자 사이를 충전하는 극미립판상 입자들의 구상 또는 포도상 집합체로 산출된다. Quintinite-3T의 집합체 외각에 motukoreaite의 판상 입자들이 과성장하여 피복하였다. 두 광물의 X선회절자료와 화학조성은 대체로 문헌에 보고된 값들과 유사하지만, motukoreaite의 Mg/Al 비는 보고된 값보다 조금 크다. 전자현미화학 분석 값으로부터 구한 motukoreaite와 quintinite-3T의 구조식은 각각 $Na_{1.6}Ca_{0.1}Mg_{40.7}Al_{20.7}Si_{0.9}(CO_3)_{13.6}(SO_4)_{7.4}(OH)_{108}56H_2O$$Mg_{3.7}Al_{1.9}Si_{0.2}(OH)_{12}(CO_3)_{0.8}(SO_4)_{0.2}3H_2O$이다. 두 광물은 얕은 바다에 퇴적된 현무암 유리질 입자들이 해수와 반응하여 생성 되었으며, 해저 환경에서 화산쇄설성 퇴적물의 교결 및 고화작용에 기여하였다.

CoFe/NiFeSiB/CoFe 자유층을 갖는 이중장벽 자기터널접합의 바이어스전압 의존특성 (Bias Voltage Dependence of Magnetic Tunnel Junctions Comprising Double Barriers and CoFe/NiFeSiB/CoFe Free Layer)

  • 이선영;이장로
    • 한국자기학회지
    • /
    • 제17권3호
    • /
    • pp.120-123
    • /
    • 2007
  • 이 연구에서는 Ta 45/Ru 9.5/IrMn 10/CoFe $3/AlO_x$/자유층/$AlO_x$/CoFe 7/IrMn 10/Ru 60(nm) 구조를 갖는 이중장벽 자기터널접합(double-barrier magnetic tunnel junction: DMTJ)를 다루었다. 자유층은 $Ni_{16}Fe_{62}Si_8B_{14}\;7nm$, $Co_{90}Fe_{10}(fcc)$ 7 nm 및 $CoFet_1$/NiFeSiB $t_2$/CoFe $t_1$으로 구성하였으며 두께 $t_1,\;t_2$는 변화시켰다. 즉 TMR비와 RA를 개선하기 위하여 부분적으로 CoFe층을 대체할 수 있는 비정질 NiFeSiB층이 혼합된 자유층 CoFe/NiFeSiB/CoFe을 갖는 DMTJ를 연구하였다. NiFeSiB($t_1=0,\;t_2=7$)만의 자유층을 갖는 DMTJ는 터널자기저항(TMR)비 28%, 면적-저항곱(RA) $86k{\Omega}{\mu}m^2$, 보자력($H_c$) 11 Oe 및 층간 결합장($H_i$) 20 Oe를 나타내었다. $t_1=1.5,\;t_2=4$인 경우의 하이브리드 DMTJ는 TMR비 30%, RA $68k{\Omega}{\mu}m^2$$H_c\;11\;Oe$를 가졌으나 $H_i$는 37 Oe로 증가하였다. 원자현미경(AFM)과 투과전자현미경(TEM)측정을 통하여 NiFeSiB층 두께가 감소하면 $H_i$가 증가하는 것을 확인하였다. 비정질 NiFeSiB층이 두꺼워지면 보통 계면의 기복을 유도하는 원주형성장(columnar growth)를 지연시키는데 유효하였다. 그러나 NiFeSiB층이 얇으면 표면거칠기는 증가하고 전자기적 Neel 결합 때문에 Hi는 커졌다.

BaO-ZnO-B2O3-SiO2계 유리에서 TiO2의 첨가가 색변환 유리의 광특성에 미치는 영향 (Effect of Titanium Dioxide in BaO-ZnO-B2O3-SiO2 Glasses on the Optical Properties of Color Conversion Glass)

  • 정현진;임태영;김진호;이미재;황종희;황평하;박태호;신동욱
    • 한국재료학회지
    • /
    • 제24권12호
    • /
    • pp.710-714
    • /
    • 2014
  • The effect of titanium dioxide ($TiO_2$) on the properties of color conversion glasses was examined for glasses based on $BaO-ZnO-B_2O_3-SiO_2$. One glass sample, containing 25 mol% of each component, was used as a reference; the other three glass samples contained 1, 3, and 5 mol% $TiO_2$, respectively. The four color conversion glass samples were prepared by sintering a mixture of glass frits and a $YAG:Ce^+$ phosphor. The characteristics of the color conversion glass samples, such as luminous efficacy, luminance, CIE (Commission International de I'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) were analyzed according to the PL spectrum. The refractive index of the glass samples was found to increase with the titanium dioxide content. In conclusion, luminous efficacy of color conversion glasses increased as the content of $TiO_2$ was raised in the glass matrix.

CO2용 Pt전극/NASICON고체전해질/Carbonate (Na2CO3-K2CO3-CaCO3 계) 전극의 가스 센서제작 및 특성 (Fabrication and Sensing Properties of Pt-electrode/NASICON Solid Electrolyte/ Carbonate(Na2CO3-K2CO3-CaCO3system ) Electrode for CO2gas sensor)

  • 최진삼;배재철;방영일;이덕동;허증수
    • 한국재료학회지
    • /
    • 제12권4호
    • /
    • pp.269-273
    • /
    • 2002
  • The NASICON solid electrolyte films, $Na_{1+x}Zr_2Si_xP_{3-x}O_{12}$(1.5< x < 2.3), was prepared from ceramic slurry by modified doctor-blade process. The NASICON solid electrolyte and fabricated sensors, Pt-electrode/NASICON/Carbonate$(Na_2CO_3-K_2CO_3CaCO_3\; system)$ electrode, were investigated to measure phase, microstructure and e.m.f variation for sensing $CO_2$ concentration. The uniform grain size of $2-4{\mu}m$ and major phase of sodium zirconium silicon phosphate phase, $Na_{1+x}Zr_2Si_xP_{3-x}O_{12}$was identified with X-ray diffraction patterns and scanning electron microscopy, respectively. The Nernst's slope of 84 mV/decade for $CO_2$ concentration from 500 to 8000 ppm was obtained at operating temperature of $400^{\circ}C$.

반도체 웨이퍼 제조공정(製造工程) 중 발생불산(發生廢酸)으로부터 $Na_{2}SiF_6$ 및 초산의 회수(回收)에 관한 연구(硏究) (Study on recovery of $Na_{2}SiF_6$ and acetic acid from waste acid produced during semiconductor wafer process)

  • 김현상;김주엽;이향숙;신창훈;김준영;배우근;안종관
    • 자원리싸이클링
    • /
    • 제17권5호
    • /
    • pp.3-10
    • /
    • 2008
  • 반도체 웨이퍼 제조 공정 중 발생하는 질산, 불산, 초산으로 구성된 혼산을 재활용하기 위한 연구를 수행하였다 초기에 $NaNO_3$$Na_{2}SiO_3$를 사용하여 불산을 $Na_{2}SiF_6$로 침전시켜 회수하였고, 이 때 혼산 중 불산의 농도는 초기 110g/L에서 0.5g/L로 낮아져 불산 회수율은 99.5%였다. 불산회수 후 남은 혼산의 질산과 초산의 농도는 각각 498g/L, 265g/L였고, 이 혼산을 2단계 분별증류 법에 의해 분리 회수하였다. 1단계에서는 초산을 증류하여 질산과 분리해내고, 2단계에서는 증류된 초산 중 잔류하는 미량의 질산을 제거하여 순수 초산만을 회수하였다. 회수된 초산의 농도는 약 20%였고, 최종회수율은 약 87.5%이었다.

나노입자들의 자기조립에 의한 TiO2-SiO2 다공체 제조 (Synthesis of Porous TiO2-SiO2 Particles by Self-assembly of Nanoparticles)

  • 오경준;김선경;장한권;장희동
    • 한국입자에어로졸학회지
    • /
    • 제7권3호
    • /
    • pp.79-85
    • /
    • 2011
  • Porous $TiO_2-SiO_2$ particles were synthesized by co-assembly of nanoparticles of $TiO_2$ and $SiO_2$ in evaporating aerosol droplets. Poly styrene latex (PSL) particles were employed as a template of porous particles. Flowrate of dispersion gas, weight ratio of $TiO_2/SiO_2$ and $SiO_2$ concentration in the precursor, and PSL size were chosen as process variables. The morphology, crystal structure, chemical bonding, and pore size distribution were analyzed by FE-SEM, XRD, FT-IR, BET. The morphology of porous $TiO_2-SiO_2$ particles was spherical and the average particle size range were from 1 to $10{\mu}m$. The particles were composed of meso and macro pores. The average particle diameter and pore volume of the as prepared particles were dependant on process variables. It was found that UV-Vis absorption of the porous particles was comparable with pure $TiO_2$ nanoparticles even though $TiO_2/SiO_2$ ratio is low in the porous particles.

$Zn_2SiO_4:Tb$ 녹색 형광체의 Dy 첨가 효과 (Effect of Dy addition on $Zn_2SiO_4:Tb$ green Phosphor)

  • 임원빈;강종혁;이동진;전덕영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.968-971
    • /
    • 2003
  • Due to a low efficiency of phosphor with large Stoke shift in Vacuum Ultra Violet (VUV) excitation environment, new PDP phosphors which can be excited in UV excitation environment need to be developed. In this study, $Zn_2SiO_4:Tb$ phosphor was synthesized by solid-state reaction method at $1300^{\circ}C$ with varying Tb concentration, and its cross relaxation effect was observed by Photoluminescence (PL) measurement. In order to decrease $^5D_3{\to}7F_j$ transition with blue emission in $Zn_2SiO_4:Tb$ phosphor, Dy, co-activator element, was added to $Zn_2SiO_4:Tb$ phosphor. In 254nm excitation environment, broad-emission peak was observed around 524nm, green emission.

  • PDF

Photoelectrochemical Water Oxidation and $CO_2$ Conversion for Artificial Photosynthesis

  • Park, Hyunwoong
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.70-70
    • /
    • 2013
  • As the costs of carbon-footprinetd fuels grow continuously and simultaneously atmospheric carbon dioxide concentration increases, solar fuels are receiving growing attention as alternative clean energy carriers. These fuels include molecular hydrogen and hydrogen peroxide produced from water, and hydrocarbons converted from carbon dioxide. For high efficiency solar fuel production, not only light absorbers (oxide semiconductors, Si, inorganic complexes, etc) should absorb most sunlight, but also charge separation and interfacial charge transfers need to occur efficiently. With this in mind, this talk will introduce the fundamentals of solar fuel production and artificial photosynthesis, and then discuss in detail on photoelectrochemical (PEC) water splitting and CO2 conversion. This talk largely divides into two section: PEC water oxidation and PEC CO2 reduction. The former is very important for proton-coupled electron transfer to CO2. For this oxidation, a variety of oxide semiconductors have been tested including TiO2, ZnO, WO3, BiVO4, and Fe2O3. Although they are essentially capable of oxidizing water into molecular oxygen, the efficiency is very low primarily because of high overpotentials and slow kinetics. This challenge has been overcome by coupling with oxygen evolving catalysts (OECs) and/or doping donor elements. In the latter, surface-modified p-Si electrodes are fabricated to absorb visible light and catalyze the CO2 reduction. For modification, metal nanoparticles are electrodeposited on the p-Si and their PEC performance is compared.

  • PDF

Effect of Zirconium Dioxide in BaO-ZnO-B2O3-SiO2 system on Optical Properties of Color Conversion Glasses

  • Jeong, HyeonJin;Jeon, Dae-Woo;Kim, Jin-Ho;Lee, Young Jin;Lee, MiJai;Hwang, Jonghee;Lee, Jungsoo;Yang, Yunsung;Youk, Sookyung;Park, Tae-Ho;Shin, Dongwook
    • 한국세라믹학회지
    • /
    • 제53권2호
    • /
    • pp.258-262
    • /
    • 2016
  • The effect of zirconium dioxide ($ZrO_2$) on the properties of color conversion glasses was examined in the $BaO-ZnO-B_2O_3-SiO_2$ system. The difference in refractive index between glass and phosphor affect the optical properties of the color conversion glass because of light scattering. Reducing the difference in refractive index is a method to improve the luminous efficacy of color conversion glasses. As a reference, a type of glass that contains 25 mol% of each component was used. To increase the refractive index of the glass samples, the BaO content was increased from 25 to 40 mol%, and $ZrO_2$ was added at levels of 1, 3, and 5 mol%. Color conversion glasses were prepared by sintering a mixture of glass and 5 wt% $YAG:Ce^{3+}$ phosphor. As a result, the refractive index of the glass was found to be dependent on the BaO and $ZrO_2$ contents in the BaO-ZnO-$B_2O_3-SiO_2$ system. As the BaO and $ZrO_2$ contents were increased, the luminous efficacy of the color conversion glass was improved because the refractive index difference between the glass and the $YAG:Ce^{3+}$ phosphor decreased.