• Journal of the Korean Ceramic Society
• /
• v.30 no.1
• /
• pp.46-54
• /
• 1993

$\beta$-SiC was chemically vapor deposited by pyrolysis of MTS＋H2 gas mixture. The experiments were conducted in the temperature range of 1100~150$0^{\circ}C$ with a r.f. induction furnace under atmospheric pressure. The IR, XRD, EDS and AES analysis revealed that the free Si was always codeposited with SiC below 140$0^{\circ}C$, regardless of the total flow rate and MTS concentration, whereas $\beta$-SiC single phase was deposited at 150$0^{\circ}C$. C3H8 or CH2Cl2 as an excess C sources, was supplied with MTS in order to obtain stoichiometric SiC at low temperature. With the addition of C3H8 or CH2Cl2, the deposition rate was increased and $\beta$-SiC single phase could be deposited even at temperature as low as 110$0^{\circ}C$. In the absence of C3H8 or CH2Cl2, the microhardness of the layer was quite low (

• Tribology and Lubricants
• /
• v.4 no.2
• /
• pp.44-51
• /
• 1988

Titanium carbide(TiC), Titanium nitride(TiN), and Titanium carbonnitride(Ti(C,N)) films were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$, $TiCl_4-N_2-H_2$, and $TiCl_4-CH_4-N_2-H_2$ gas mixtures, respectively. The experimental results indicate that TiC coatings compared with TiN coatings on $Si_3N_4$ -TiC ceramic have an improved microstructural property, good thermal shock resistance, and good interfacial bonding. However TiN coatings compared with TiC coatings have a low friction coefficient with steel and good chemical stability. It is found by cutting test that coated insert compared with $Si_3N_4$-TiC ceramic have a superior flank and crater wear resistance. And multilayer coating compared with monolayer coating shows a improved wear resistance.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.845-851
• /
• 2002

The synthesis of the intramolecular donor - stabilized silyl and germyl complexes of the type ($Cab^c.p) MMe_2X$ (2a:M=Si, X=Cl;2b;M= Ge, X=Cl;2e;M=Si,X=H) was achieved by the reaction of $LiCab^c,p$ (1) with $Me_2SiClX$ and $Me_2GeCl_2$ respectively. The intramolecular M←P interacion in 2a-2c is provided by $^1H$, $13^C.$, $31^P$ and $29^Si$ NMR spectroscopy. The salt elimination reactions of dichlorotetramethyldisilane and -digermane with 1 afforded the $bis(\sigma-carboranylphosphino)disilane$ and disgermane [$(Cab^C.P)MMe_2]_2(4a;M$ = Si;4b: M=Ge). The oxidative addition reaction of 4a-4b with $pd_2(dba)_3CHCl_3afforded$ the bis(silyl)-and bis(germyl)-palladium complexes. The chloro-bridged dipalladium complexes were obtained by the reaction of 2a-2b with $pd_2(dba)_3CHCl_3$ The crystal structures of 5a and 7b were determined by X-ray structural studies.

• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.200-206
• /
• 1997

Using $SiCl_{2}H_{2}$, $NH_{3}$ and $N_{2}O$, we have fabricated silicon oxynitride ($Si_{x}O_{y}N_{z}$) layers on thermally oxidized silicon wafer by low pressure chemical vapor deposition. Three different compositions were achieved by controlling gas flow ratios($NH_{3}/N_{2}O$)) to 0.2, 0.5 and 2 with fixed gas flow of $SiCl_{2}H_{2}$. Ellipsometry and high frequency capacitance-voltage(HFCV) measurements were adapted to investigate the difference of the refractive index, dielectric constant, and composition, respectively. Regardless of nitride content, silicon oxynitrides had similar stability to silicon nitrides. The relative standing of alkali ion sensitivity in silicon oxynitride layers was influenced by nitride content. The better alkali ion-sensitivity was achieved by increasing oxide content in bulk of silicon oxynitrides.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.34-40
• /
• 1985

An investigation has been made on the growth phenomena of epitaxial layer and polysilicon from SiH2 Cl2 in H2 and the etch phenomena of them from HCI in H2, at the system pressures of 1.0 atm (atmospheric process) and 0.1 attn (reduced pressure process). From the experimental equations for the growth rates and etch rates. the relevant process conditions for the selective epitaxy are predicted for the case of using mixtures of SiH2Cl2 and HCI in H2. As a result, it is found that selective epitaxial growth region exists in the concentration range investigated for the reduced pressure process but it does not for the atmospheric Process. This is due to the differences in the growth rates and etch rates at atmospheric and reduced pressure.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.405-412
• /
• 2009

In high temperature ceramic glazes, a stable range of pink-red colors that produced $Cr_2O_3-SnO_2-CaO-SiO_2$ pigments were factored by Cassiterite($SnO_2$) and Malayaite($CaSnSiO_5$) by $Cr_2O_3$. The experiment examined the influence of $CrCl_3$, a Sn-Cr substitution added with a mineralizer ($H_3BO_3$), as a chromophore in pigments. The experiment also studied the effect of $H_3BO_3$ (2 wt%) when added to malayaite($CaSnSiO_5$) to see if the crystalline reaction will increase. $Cr_2O_3$ was also substituted with $CrCl_3$ in order to prove how much influence $CrCl_3$ had on the $H_3BO_3$. Malayaite and cassiterite were the basic compound materials and the experiment was conducted both with and without mineralizers (2 wt% of $H_3BO_3$). Each compound was synthesized at 800, 1000, 1200, 1300, 1400, $1500^{\circ}C$ for 2 h. Synthesized pigments were analyzed by XRD, FT-IR and UV-Vis. The temperature variation produced two crystal phases that showed the different engaging effects of Cr oxidation. $CrCl_3$ produced a better effect on the malayaite crystal phase, resulting in a more defined pigmentation of the pink-red coloration compared to $Cr_2O_3$.

• Journal of Integrative Natural Science
• /
• v.2 no.2
• /
• pp.78-81
• /
• 2009

In recent years, organometallic polymer containing silane and silole unit has been a topic of interest because of the wide range of optical, electrical and luminescent properties. In previous work, we synthesized functionalsilanebridged[1]ferrocenophane from the reaction of dimethyldichlorosilane[Me2SiCl2] and diphenyldichlorosilane[Ph2SiCl2] and dichloromethylvinylsilane[C3H6SiCl2] with ferrocene$[Fe({\eta}-C5H4)2]$ and n-BuLi. In this work, we have synthesized Poly(ferrocenylsilane) via the Thermal Ring-Opening Polymerization(ROP). characteristics of the poly(ferrocenylsilane) were investigated by gel permeation chromatography(GPC), 1H- and 13C-NMR spectroscopy.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1221-1224
• /
• 2013

The atomic layer deposition (ALD) of $ZrO_2$ was conducted in ultrahigh vacuum (UHV) conditions. The surface was exposed to $ZrCl_4$ and $H_2O$ in sequence and the surface species produced after each step were identified in situ with X-ray photoelectron spectroscopy (XPS). $ZrCl_4$ is molecularly adsorbed at 140 K on the $SiO_2$/Si(111) surface covered with OH groups. When the surface is heated to 300 K, $ZrCl_4$ loses two Cl atoms to produce $ZrCl_2$ species. Remaining Cl atoms of $ZrCl_2$ species can be completely removed by exposing the surface to $H_2O$ at 300 K followed by heating to 600 K. The layer-by-layer deposition of $ZrO_2$ was successfully accomplished by repeated cycles of $ZrCl_4$ dosing and $H_2O$ treatment.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.8
• /
• pp.1143-1146
• /
• 2004

A simple and effective procedure for conversion of primary, secondary, allylic and benzylic alcohols into the corresponding iodides is described using $CeCl_3{\cdot}7H_2O/NaI\;over\;SiO_2$ under microwave irradiation. Benzylic alcohols are selectively converted in the presence of saturated alcohols into their corresponding benzylic iodides under these conditions.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.63-70
• /
• 1996

Silicon epitaxial films of submicron level were successfully grown by the RTCVD method. For the growth of silicon epitaxial layers, $SiH_{2}Cl_{2}\;/\;H_{2}$ gas mixtures and various process parameters including $H_{2}$ prebake process were used. The growth conditions were varied to investigate their effects on the interface abruptness of doping profile, the film growth rates and crystalline properties. The crystallinity of the undoped silicon was excellent at the growth temperature of $900^{\circ}C$. The doping profiles were measured by SIMS technique. The abruptness of doping profile would be controlled within about $200{\AA}/decade$ in the structure of undoped Si / $n^{+}-Si$ substrate.