• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.53-68
• /
• 2020

The Cadastral Renovation is a National project to investigate and survey the registration of Cadastral Record and replace the existing Cadastral Record with a new Cadastral Record by digital, and to correct the registration of Cadastral Record if the registration of Cadastral Record does not match the actual status of the land. The Business Period generally takes about one year and six months to two years. The time required is getting longer due to problems that occur in the course of the Adjustment amount after the cadastral resurvey survey due to complex structure and internal conflict due to the interest between landowners. After Boundary Decision of the real boundary, the land area is confirmed by the landowners, and the cadastral office is to settle the Cadastral Renovation by calculating the Adjustment amount according to the confirmed area and the increase and decrease of the cadastral area. Therefore, the solution plan was suggested so that reasonable Adjustment amount can be applied through empirical research applied to the time of calculation of Adjustment amount and the method of calculation of Adjustment amount. The improvement method showed the expected effect that can lead the agreement with the landowner to the shortest period, and it was also possible to set the real boundary that meets the purpose of the Cadastral Renovation. This study suggests improvements in the method of calculating standard Adjustment amount, the method of imposing Adjustment amount, and the method of boundary adjustment that does not impose adjustment amount through the cadastral Renovation and parallel studies, and it is expected that the Cadastral Renovation will be completed by 2030.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.27-33
• /
• 2022

Sleep is an essential factor for living a healthy life, but most modern people complain of poor sleep. For these people, as the need for a means to simply evaluate and manage the quality of sleep increases, devices that can check the sleep state at home without monitoring by an examiner are being developed. The smart sleep mask, which is the subject of this usability test, provides bio-signal monitoring while sleeping so that you can conveniently measure and manage your sleep state for yourself. The purpose of this study is to evaluate the usability and safety of the smart sleep mask, to find and prevent potential factors related to errors in use that may occur, and to develop the comfort and safety of this product. As a result of the formative evaluation of the sleep mask prototype, it was reported that it was difficult to turn on the power and check the results, and that the sleep mask was not comfortable to wear. Different opinions were presented on the size and weight of the sleeping mask by people in different age groups.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.899-906
• /
• 2020

The WSS lateral examination is important for diagnosing spinal disorders. Recently, long-length detectors for large-area diagnose have been popularized to effectively reduce the exposure dose and examination time. It can be applied very efficiently to examinations of patients with high risk of falls, children, and adolescents. However, since the image is acquired through a single irradiation, the volume of cervical vertebra is relatively smaller than the lumbar due to the geometrical anatomy of the spine. Therefore, this study intends to fabricate an additional filter using 3D printing technology and copper filament to obtain uniform image quality in the WSS lateral examination and to analyze the results. 3D printing technology is able to easily print a desired shape, so it is widely used in the entire industrial field, and recently, a copper filament has been developed to confirm the possibility as an additional filter. In the WSS lateral examination, CNR and SNR were excellently measured when the additional filter was applied, confirming the possibility of using the additional filter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.777-783
• /
• 2021

Aircraft are affected by various vibrations during maneuvering. These vibrations may have a fatal effect on the survival of aircraft in some cases, so the safety of components applied to the aircraft should be proven against various vibrations through random vibration analysis. In this study, the structural robustness of an external fuel tank and pylon for military aircraft was evaluated under random vibration conditions using commercial software, MSC Random. In the random vibration analysis, a frequency response analysis was performed by imposing a unit load on the boundary condition point, and then excitation was performed with a PSD profile. In this process, the required mode data was extracted through a modal analysis method. In addition, the random vibration profile specified in the US Defense Environment Standard was applied as random vibration conditions, and the PSD profile given in units of G's was converted into units of gravitational acceleration. As a result of the numerical analysis, we evaluated the structural robustness of the external fuel tank and pylon by identifying the safety margins of beam elements, shell elements, and solid elements in a numerical model for random vibration in the x, y, and z directions.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.125-139
• /
• 2021

Continuous subway line expansion over the years in Seoul metropolitan area has contributed to improved accessibility to public transport. Since public transport accessibility has a significant impact on housing decisions, quantitative analysis of correlation between housing prices and public transport accessibility is regarded as one of the most important factors for planning better housing policies. This study defines the reduction of traveling time resulted from the construction of new metro stations despite them not being the closest stations as 'Network Expansion Effect', and seeks to understand how the Network Expansion Effect impacts on housing prices. The study analyzes monthly rent data converted from upfront lump sum deposit, so called Jeonse in Korea, from 2012 to 2018, through 'A Modified Repeat Sales Model.' As a result, the effect of 'Network Expansion' on rental prices in Seoul has stronger during the period of 2017 to 2018 than the base period of 2012 to 2014, which suggests the 'Network Expansion' has a meaningful effect on rent. In addition, in comparison between the most and the least affected group of apartments by 'Network Expansion Effect', the most affected group has more price increase than the least affected group. These findings also indicate that different levels of 'Network Expansion Effect' have various influences on the value of residential real estate properties.

• Korean Journal of Plant Resources
• /
• v.35 no.2
• /
• pp.248-288
• /
• 2022

The study on vascular plants of Gayasan National Park was conducted in 2016 over a period of 34 days from March to October 2016. As the study, a total of 768 taxa were recorded, including 118 families, 396 genera, 691 species, 15 subspecies, 51 varieties, and 11 forms. In the vascular plants, four endangered wild plants were recorded, Ponerorchis cucullata (L.) X.H.Jin, Trientalis europaea var. arctica (Fisch.) Ledeb., Cypripedium macranthos Sw., and Pedicularis hallaisanensis Hurus. Taxa of Least Concern (LC) or higher level on National Red List published by the Ministry of Environment of Korea were 21 taxa for example Tricyrtis macropoda Miq., and Lilium cernuum Kom. A total of 37 Korean endemic plants were investigated for example Abies koreana E.H.Wilson and Impatiens atrosanguinea (Nakai) B.U.Oh & Y.P.Hong. A total of 162 taxa of floristic regional indicators (3^rd to 5^th degree) were investigated including 9 taxa of V, 15 taxa of IV, 38 taxa of III, 45 taxa of II, and 53 taxa of I. Naturalized plants were recorded a total of 46 taxa with a Naturalization Index of 6.0%, the Urbanization Index was calculated to be 14.3% and 5 taxa of ecosystem disturbance plants were investigated such as Sicyos angulatus L., Rumex acetosella L., and Humulus scandens (Lour.) Merr. As the result of comparison with previous studies, in this study a total of 206 taxa were newly identified including 62 families, 144 genera, 184 species, 2 subspecies, 15 varieties, and 5 forms.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.513-518
• /
• 2022

Electron beam quality assurance (QA) should be done regularly for accurate radiation therapy. However, QA tools used in clinical practice are designed mainly for X-rays. So, a dosimeter for electron beam QA is required. Therefore, in this study, the electron beam detection performance was measured by using a thorium bromide material as an electron beam sensor. In addition, it was evaluated whether it could be applied with an electron beam QA dosimeter. Reproducibility, linearity, and dose rate dependence were evaluated at 6 MeV and 9 MeV energies. As a result of reproducibility, it showed a maximum output change of 0.92% at 6 MeV and 1.15% at 9 MeV. The linearity result evaluation and determination coefficient were presented as 0.9998. As a result of dose rate dependence evaluation, relative standard deviation 0.51% at 6 MeV and relative standard deviation 1.07% at 9 MeV were presented. The manufactured TlBr sensor shows the ability to detect radiation that meets the criteria for evaluation of reproducibility, linearity, and dose rate dependence. These results mean that the TlBr dosimeter is applicable as an electron beam QA dosimeter.

• Nutrition Research and Practice
• /
• v.16 no.6
• /
• pp.685-699
• /
• 2022

BACKGROUND/OBJECTIVES: Platycodon grandiflorum (PG) has long been known as a medicinal herb effective in various diseases, including bronchitis and asthma, but is still more widely used for food. Fermentation methods are being applied to increase the pharmacological composition of PG extracts and commercialize them with high added value. This study examines the hydrolyzed and fermented PG extract (HFPGE) fermented with Lactobacillus casei in RAW 264.7 cells, and investigates the effect of amplifying the immune and the probable molecular mechanism. MATERIALS/METHODS: HFPGE's total phenolic, flavonoid, saponin, and platycodin D contents were analyzed by colorimetric analysis or high-performance liquid chromatography. Cell viability was measured by the MTT assay. Phagocytic activity was analyzed by a phagocytosis assay kit, nitric oxide (NO) production by a Griess reagent system, and cytokines by enzyme-linked immunosorbent assay kits. The mRNA expressions of inducible nitric oxide synthase (iNOS) and cytokines were analyzed by reverse transcription-polymerase chain reaction, whereas MAPK and nuclear factor (NF)-κB activation were analyzed by Western blots. RESULTS: Compared to PGE, HFPGE was determined to contain 13.76 times and 6.69 times higher contents of crude saponin and platycodin D, respectively. HFPGE promoted cell proliferation and phagocytosis in RAW 264.7 cells and regulated the NO production and iNOS expression. Treatment with HFPGE also resulted in increased production of interleukin (IL)-1β, IL-6, tumor necrosis factor (TNF)-α, C-X-C motif chemokine ligand10, granulocyte-colony-stimulating factor, granulocyte-macrophage colony-stimulating factor, and monocyte chemoattractant protein-1, and the mRNA expressions of these cytokines. HFPGE also resulted in significantly increasing the phosphorylation of NF-κB p65, extracellular signal-regulated kinase, and c-Jun N-terminal kinase. CONCLUSIONS: Taken together, our results imply that fermentation and hydrolysis result in the extraction of more active ingredients of PG. Furthermore, we determined that HFPGE exerts immunostimulatory activity via the MAPK and NF-κB signaling pathways.

• The Korea Journal of Herbology
• /
• v.28 no.1
• /
• pp.59-64
• /
• 2013

Objectives : Methicillin-Resistant Staphylococcus aureus (MRSA) is a cephalosporin and beta-lactam antibiotic-resistant strains. In most cases, that is spread from infected patients and infection rates are growing increasingly. Thus, accordingly, increased resistance to antibiotics is causing serious problems in the world. Therefore, there is a need to develop alternative antimicrobial drugs for the treatment of infections diseases. Methods : The antibacterial activities of Sinhyowoldosan were evaluated against 3 strains of Methicillin-resistant staphylococcus aureus(MRSA) and 1 standard Methicillin-susceptible S. aureus (MSSA) strain by using the disc diffusion method, minimal inhibitory concentrations (MICs) assay, colorimetric assay using MTT test, checkerboard dilution test and time-kill assay was performed under dark. Results : The MIC (minimum inhibitory concentration) of Sinhyowoldosan water extract against S. aureus strains ranged from 500 to 2,000 ${\mu}g/mL$, so we have confirmed it on a strong antibacterial effect. Also, the combinations of Sinhyowoldosan water extract and conventional antibiotics exhibited improved inhibition of MRSA with synergy effect. We suggest that Sinhyowoldosan water extract against MRSA have antibacterial activity, it has potential as alternatives to antibiotic agent. the combination test was used, Triton X-100 (TX) and DCCD for measurement of membrane permeability and inhibitor of ATPase. As a result, antimicrobial activity of SH is affected by the cell membrane were assessed. Conclusion : We suggest that the Sinhyowoldosan water extract lead the treatment of bacterial infection to solve the resistance and remaining side-effect problems that are the major weak points of traditional antibiotics.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.99-106
• /
• 2021

Purpose: In this study, we aimed to manufacture a patient-specific gel phantom combining three-dimensional (3D) printing and polymer gel and evaluate the radiation dose and dose profile using gel dosimetry. Methods: The patient-specific head phantom was manufactured based on the patient's computed tomography (CT) scan data to create an anatomically replicated phantom; this was then produced using a ColorJet 3D printer. A 3D polymer gel dosimeter called RTgel-100 is contained inside the 3D printing head phantom, and irradiation was performed using a 6 MV LINAC (Varian Clinac) X-ray beam, a linear accelerator for treatment. The irradiated phantom was scanned using magnetic resonance imaging (Siemens) with a magnetic field of 3 Tesla (3T) of the Korea Institute of Nuclear Medicine, and then compared the irradiated head phantom with the dose calculated by the patient's treatment planning system (TPS). Results: The comparison between the Hounsfield unit (HU) values of the CT image of the patient and those of the phantom revealed that they were almost similar. The electron density value of the patient's bone and brain was 996±167 HU and 58±15 HU, respectively, and that of the head phantom bone and brain material was 986±25 HU and 45±17 HU, respectively. The comparison of the data of TPS and 3D gel revealed that the difference in gamma index was 2%/2 mm and the passing rate was within 95%. Conclusions: 3D printing allows us to manufacture variable density phantoms for patient-specific dosimetric quality assurance (DQA), develop a customized body phantom of the patient in the future, and perform a patient-specific dosimetry with film, ion chamber, gel, and so on.