• 대한화학회지
• /
• 제44권3호
• /
• pp.281-285
• /
• 2000

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.657-664
• /
• 2004

Titanium sulfate supported on $TiO_2$was prepared by impregnation of powdered $TiO_2$with an aqueous solution of titanium sulfate followed by calcining in air at high temperature. For Ti$(SO_4)_2/TiO_2$ samples calcined at 300 $^{\circ}C$, no diffraction lines of titanium sulfate are observed at $Ti(SO_4)_2$loading up to 30 wt%, indicating good dispersion of $Ti(SO_4)_2$ on the surface of $TiO_2$. The acidity of the catalysts increased in proportion to the titanium sulfate content up to 20 wt% of $Ti(SO_4)_2$. 20 wt% $Ti(SO_4)_2/TiO_2$ calcined at 300 $^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for these reactions, were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.145-149
• /
• 2000

The purpose of this study was to determine whether Vermi Cast could be used effectively to remove $SO_2$ from flue gas, and then to investigate optimum adsorption conditions. The Vermi Cast used as adsorbent was mechanically screened with 8~20 mesh sieve. The adsorption data for $SO_2$ were regressed using the Freundlich isotherm. The fit was generally satisfactory ($R^2$=0.945~0.982). With the temperature changes from 2$0^{\circ}C$ to 4$0^{\circ}C$, the constant k in Freundlich isotherm qe= $kCe^{1/n}$, decreased from 1.409 at 2$0^{\circ}C$to 0.297 at 4$0^{\circ}C$, and the exponent 1/n were decreased from 0.343 to 0.134. With the bed depth changes from 10cm to 30cm, the adsorption capacity expressed as mmol of $SO_2$ adsorbed per g of Vermi Cast increased from 0.247 to 0.381. Moisture content is an important parameter in the $SO_2$ adsorbed were observed over 0.3mmol $SO_2$ /g Vermi Cast. The best adsorption capacity was 0.487mmol $SO_2$ /g Vermi Cast, and it was obtained with moisture content 37%, temperature 2$0^{\circ}C$. From the above results, ti might be concluded that Vermi Cast is effectively as a good adsorbent to remove $SO_2$ from flue gas.

• 환경위생공학
• /
• 제6권1호
• /
• pp.47-62
• /
• 1991

Yellow Sand Phenomena was observed from April 8 th to 10 th in 1990. During this period particle was collected to investigate the chacteristics of chemical composition of particulate by High Volume Air Sampler and Andersen Air Sa~npler in Seoul. During this period the particle concentration was 350 yg/$m^3$ and the anions, cations, and metal concentrations were increased and the orders of these were $S0_4\;^{-2}>N0_3\;^->Cl^->F^-, Na^+>Ca^{+2}>NH_4\;^+>Mg^{2+}>K^+$, and Fe>Al>Si>Zn>Pb respectively. The principal source of Yellow Sand were identified soil and sea salt. Mn used by the trace element of soil, the persentage of contribution from soil was calculated to be about 81.3% for the particle increased by Yellow Sand Phenomena. Also the principal chemical compounds of particle were estimate metals(Fe, Al, Si, Zn) oxides, $CaSO_4, NaSO_4, MgSO_4, NaC1, MgCl_2$ and $(NH_4)_2SO_4$.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1749-1756
• /
• 2005

The $NiSO_4$ supported on FeO-promoted $ZrO_2$ catalysts were prepared by the impregnation method. FeOpromoted $ZrO_2$ was prepared by the coprecipitation method using a mixed aqueous solution of zirconium oxychloride and iron nitrate solution followed by adding an aqueous ammonia solution. The addition of nickel sulfate (or FeO) to $ZrO_2$ shifted the phase transition of $ZrO_2$ (from amorphous to tetragonal) to higher temperatures because of the interaction between nickel sulfate (or FeO) and $ZrO_2$. 10-$NiSO_4$/5-FeO-$ZrO_2$ containing 10 wt % $NiSO_4$ and 5 mol % FeO, and calcined at 500 ${^{\circ}C}$ exhibited a maximum catalytic activity for ethylene dimerization. $NiSO_4$/FeO-$ZrO_2$ catalysts was very effective for ethylene dimerization even at room temperature, but FeO-$ZrO_2$ without $NiSO_4$ did not exhibit any catalytic activity at all. The catalytic activities were correlated with the acidity of catalysts measured by the ammonia chemisorption method. The addition of FeO up to 5 mol % enhanced the acidity, surface area, thermal property, and catalytic activities of catalysts gradually, due to the interaction between FeO and $ZrO_2$ and due to consequent formation of Fe-O-Zr bond.

• 한국식품영양과학회지
• /
• 제26권6호
• /
• pp.1096-1101
• /
• 1997

Soy curd was prepared using imported soybean(U.S.grade A) and changes in quality were evaluated using different types and mixtures of coagulants(CaCl$_2$, CaSO$_4$, MgCl$_2$, MgSO$_4$, and glucono-$\delta$-lactone). Quality of soy curd was determined by rheological properties, yield, and color. Based upon the characteristics of each coagulant, mixtures of two coagulants were prepared in various ratios. The mixture of CaSO$_4$or MgCl$_2$with glucono-$\delta$-lactone(GDL), and that of CaSO$_4$or MgCl$_2$with MgSO$_4$resulted in soy curd of good quality in terms of rheological properties and yield.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1303-1308
• /
• 2001

A series of catalysts, NiSO4/TiO2, for ethylene dimerization was prepared by the impregnation method using aqueous solution of nickel sulfate. On the basis of the results obtained from X-ray diffraction, the addition of NiSO4 shifted the transition of TiO2 from the anatase to the rutile phase toward higher temperatures due to the interaction between NiSO4 and TiO2. Nickel sulfate supported on titania was found to be very active even at room temperature. The high catalytic activity of NiSO4/TiO2 closely correlated with the increase of acidity and acid strength due to the addition of NiSO4. It is suggested that the active sites responsible for ethylene dimerization consist of low valent nickel, Ni+, with an acid.

• 공업화학
• /
• 제1권1호
• /
• pp.35-43
• /
• 1990

일련의 $TiO_2-SiO_2$촉매를 $TiCl_4$와 $Na_2SiO_3$혼합용액을 공침전시켜 제조하였으며 이중 일부의 촉매는 1N $H_2SO_4$로 처리하여 촉매표면을 개질하였다. 개질된 촉매의 촉매활성은 개질 안된 촉매보다 높은 촉매활성을 나타내었으며 cumene dealkylation 반응에서 보다 2 - propanol dehydration 반응에서 더욱 효과가 크게 나타났다. 개질 안된 촉매의 상기 두 반응에 대한 촉매활성은 산의 양과 관계가 있었다. $TiO_2-SiO_2$촉매는 비교적 많은 양의 약한 산자리와 작은 양의 강한 산자리를 가졌기 때문에 cumene dealkylation 반응에서 보다 2 - propanol dealkylation 반응에 더 높은 촉매활성을 나타내었다. 촉매활성에 미치는 $H_2SO_4$의 개질효과는 $TiO_2$ 함량에 비례하였으며 $92-TiO_2-SiO_2/SO_4^2$가 2 - propanol dealkylation 반응에 가장 큰 촉매활성의 증가를 나타내었다.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.424-431
• /
• 2011

The Sulfur-Iodine(SI) thermochemical hydrogen production process consists of three sections, which are so called the Bunsen reaction section, the $H_2SO_4$ decomposition section and the HI decomposition section. In order to identify the phase separation characteristics in the reaction conditions with the high solubility of $SO_2$, we conducted the Bunsen reaction at the low temperatures, ranging from 283 to 298K, with the $I_2/H_2O$ molar ratios of 2.5/16.0 and 3.5/16.0. The molar ratios of HI/$H_2SO_4$ products obtained from low temperature Bunsen reactions were ca. 2, indicating that there were no side reactions. The amount of reacted $SO_2$ was increased with decreasing the temperature, while the amounts of unreacted $I_2$ and $H_2O$ were decreased. In the phase separation of the products, the amount of a $H_2SO_4$ impurity in $HI_x$ phase was increased with decreasing the temperature, though the temperature has little affected on HI and $I_2$ impurities in $H_2SO_4$ phase.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권E2호
• /
• pp.69-77
• /
• 2006

Combined gas and aerosol measurements at a downwind area of the volcanic plume would be essential for helping to access the impact of the volcanic eruption on the local ecosystem and residents. An intensive and the fine time resolution measurement of $SO_2$, sulfate and PM2.5 was made to estimate their distribution in the Kanto area of Japan during the Miyakejima volcanic eruption period. In Tokyo, the 1 hr average $SO_2$ concentration observed before the eruption was 23.9 ppbv, while that of after eruption was 140.4 ppbv. In the Saitama Prefecture, the average concentration of $SO_2$ marked in the present study was two times higher than the average before the volcanic eruption. The PM2.5 mass concentrations in Sitama ranged from 3.8 to $136{\mu}g\;m^{-3}$. Sulfate accounts for $4.4{\sim}39.6%$ of PM2.5 in Sitama. The good correlationship between the concentrations of $SO_2$ and sulfate was obtained. The results of the VAFTAD and HYSPLIT models indicate that $SO_2$, sulfate, and PM2.5 measured in the present study would be expected to be significantly affected by the Miyakejima volcanic plume.