• 제목/요약/키워드: $SO_4^{2-}$

검색결과 20,947건 처리시간 0.05초

알루미늄 화합물이 흰쥐의 뇌조직에 미치는 영향 (Effects of Aluminum Compound on the Brain Histologial Change of Rats)

  • 한성희;김중만;백승화
    • 한국식품과학회지
    • /
    • 제27권6호
    • /
    • pp.915-920
    • /
    • 1995
  • This study was performed to investigate the effect of aluminum compound on the aluminum contents and histological change in brain tissue of rats. Seventy five male Sprague-Dawley strains were divided into five groups consisting of the control, 250 ppm $AlCl_3$ group, 500 ppm $AlCl_3$ group, 250 ppm $Al_2(SO_4)_3$ group, 500 ppm $Al_2(SO_4)_3$ group and kept on the diet for 2 weeks. The weight gain was increased by administration of $AlCl_3$ but decreased by administration of $Al_2(SO_4)_3$ as compared to control group. The aluminum contents in brain tissue of each group; 250 ppm $AlCl_3$ group, 500 ppm $AlCl_3$ group, 250 ppm $Al_2(SO_4)_3$ group and 500 ppm $Al_2(SO_4)_3$ group were 64.63, 102.21, 132.64 and 180.41 ppm, respectively. Aluminum accumulation in brain tissue was higher with administration of $Al_2(SO_4)_3$ than with administration of $AlCl_3$. In $AlCl_3$ administration group, multiple small intracytoplasmic granules and microvacuole were seen in large pyramidal cells of cortex and granulovacuolar degeneration. In $Al_2(SO_4)_3$ administration group revealed pollagis pallor, cellular pyknosis, microcavitation resulted from edema in deeper cortical layers were observed. Blue-pigmentation which represents the accumulation of aluminum was noted In granulovacuolar degeneration site in $Al_2(SO_4)_3$ administration group.

  • PDF

지류보존처리를 위한 염색보수지의 매염제에 따른 열화특성 연구 (Study on Aging Characteristics Depending on the Utilized Mordants of Dyed Restoration Paper for Paper Conservation)

  • 지주연;위광철
    • 보존과학회지
    • /
    • 제29권1호
    • /
    • pp.47-54
    • /
    • 2013
  • 본 연구에서는 손상된 지류문화재의 수리복원 과정에서 사용되는 염색보수지의 제작에 있어 매염제가 바탕종이에 어떠한 영향을 주는지 확인하고자 현재 시판되는 대표적인 합성매염제 4종류 [$K_2CO_3$, $AlK(SO_4)_2{\cdot}12H_2O$, $Cu_2SO_4{\cdot}5H_2O$, $FeSO_4$]를 선정하여 시료를 제작하고 자외선, 온 습도를 이용한 인공열화를 통해 열화 후 색도 측정, 인장지수 측정, pH측정(산성화 정도)을 실시하고 그에 따른 물성변화를 확인하였다. 색도 측정 결과 $K_2CO_3$매염 시료의 ${\Delta}E^*ab$값이 가장 크게 나타났으며 인장지수 측정 결과 열화시간에 따라 염색시료의 강도는 모두 저하하였으나 매염제에 따른 변화는 뚜렷하지 않음을 알 수 있었다. 산성도 측정 결과 $Cu_2SO_4{\cdot}5H_2O$$FeSO_4$로 매염한 시료의 pH값이 6이하로 감소하였다. 실험 결과를 통하여 보수지 염색에서 사용되는 매염제는 바탕종이의 염색 특성 및 노화에 영향을 주는 것으로 확인 되었다.

서울시 대기중 입자상 오염물질의 조성에 관한 연구 (Ionic composition of aerosol particles under urban atmospheres of Seoul, Korea)

  • 한진석;김신도
    • 한국대기환경학회지
    • /
    • 제12권4호
    • /
    • pp.389-398
    • /
    • 1996
  • In order to understand the relative importance of various pathways leading to the production and transformation of aerosols under different atmospheric conditions, the behavior of atmospheric aerosols have been investigated using a high volume tape sample in Seoul for a week period during August 1990. The concentrations of anion $(SO^{2-}_4, NO^-_3, CI^-)$ and cation $(Ca^{2+}, Na^+, NH^+_4)$ species of aerosol samples were analyzed to identify the ionic composition of aerosols and to estimate their relative contributions to aerosol formation. The concentrations of aerosol species were calculated by a multiple regression model. The results of our calculations indicate the existence of various chemical species such as $(NH_4)_2SO_4, Na_2SO_4, CaSO_4, NH_4NO_3, NaNO_3, Ca(NO_3)_2, NH_4Cl$, and NaCl salts. According to our calculations, the most dominant species of aerosol was $(NH_4)_2SO_4$ with the mean concentration of 23.3 $/mu g/m^3$ (66.9%). The proportion of different componts with aerosol (e.g., $NH_4NO_3$ and $NH_4Cl$) was strongly affected by temperature, relative humidity, and partial presure of gases.

  • PDF

부산 지역의 SO$_2$ 농도 변화 특성에 관한 고찰 (On the Characteristics of the SO$_2$ Concentration Variation in Pusan, Korea)

  • 전병일;김유근;이화운
    • 한국대기환경학회지
    • /
    • 제10권4호
    • /
    • pp.245-251
    • /
    • 1994
  • We considered that characteristics of SO$_2$, concentration level and relations of the meteorological parameters and high pollution concentration from the data measured 7 air quality continuous monitoring stations during 4 years, from 1990 to 1993 in Pusan. The SO$_2$ concentration level showed decreasing trend yearly, it was maximum in Winter, minimum in Summer. The time of SO$_2$ peak concentration lagged from seashore to land because of break-down of the nocturnal inversion layer and seabreeze. Ihe correlations of daily SO$_2$, value between various air quality continuous monitoring stations were highest between Beomcheondong and Meongryundong, lowest between Daeyeondong and Sinpyeongdong because of difference of air Pollution emission sources characteristic. The meteorological parameters affecting SO$_2$ concentration level were minimum temperature, relative humidity, wind speed and air pressure. The SO$_2$ high pollution($\geq$95ppb) occurred almost in Winter, particulaly in such day showing lower wind speed and higher air pressure. Elementary SO$_2$ high Pollution Predictor were high pressure system and stability of lower atmosphere.

  • PDF

산성강하물과 해송엽 엽록소의 관련성 (Relation of Acid Depositions and Chlorophyll Concentration in the Pinus thunbergii Leaf)

  • 이총규;김종갑;황진형
    • 농업생명과학연구
    • /
    • 제45권2호
    • /
    • pp.35-41
    • /
    • 2011
  • 본 연구는 공단지역과 도시지역의 산성강하물과 해송엽의 엽록소 함량과 관련성이 있는 인자를 조사하여 그 관련성을 분석하였다. 해송 임분의 수관통과우 pH는 공단지역이 pH 4.20이었고, 도시지역이 pH 4.87이었다. 공단지역과 도시지역의 해송엽의 엽록소 전체 함량은 각각 0.5984와 0.6784로서 공단지역에서 함량이 낮았다. 지역별 $SO_2$농도는 공단지역이 0.029 ppm, $NO_2$농도는 도시지역이 0.021 ppm이었다. 해송엽의 엽록소 함량과 산성강하물의 인자 상호간의 상관은 pH (r=-0.8769), ${NO_3}^-$ (r=0.6983), ${SO_4}^{2-}$ (r=0.8929)이온, $SO_2$ (r=0.8738), $NO_2$ (r=0.8523)이었다 (p<0.01). 해송엽의 엽록소 함량 (Y)에 관여하는 인자의 회귀 방정식은 Y=4.8979 + 0.7698pH + $0.8412{SO_4}^2$ + $0.8673SO_2$, + $0.8767NO_2$+ $0.8767{NO_3}^-$ ($r^2$=0.8873)이었고, 이때의 설명력은 88%이었다.

$Na_2SO_4$가 시멘트-플라이애쉬 페이스트 및 콘크리트 강도에 미치는 영향 (Influence of $Na_2SO_4$ on Cement-flyash Paste and the Strength Development of Concrete)

  • 이진용;배성용;송종택
    • 콘크리트학회지
    • /
    • 제11권2호
    • /
    • pp.85-94
    • /
    • 1999
  • 플라이애쉬 대체량에 따른 변화, 양생방법이 미치는 영향 그리고 조기강도를 높이기 위해 첨가된 화학 혼화제가 시멘트-플라이애쉬 페이스트의 특징 및 콘크리트 강도에 미치는 영향을 알아보았다. 시멘트-플라이애쉬 페이스트의 압축강도는 시멘트로만 만들어진 페이스트보다 낮았으며, 플라이애쉬의 대체량이 증가할수록 강도차이가 증가하였다. 그러나 증기양생시 시멘트-플라이애쉬 페이스트는 수중양생시보다 압축강도가 증가하였으며, 특히 조기강도가 크게 향상되었다. 조기강도 증진을 목적으로 혼입한 활성화제($Na_2SO_4$)의 첨가는 시멘트-플라이애쉬 페이스트 조기강도를 증진시켰으며, 또한 $Na_2SO_4$와 플라이애쉬를 30% 함유한 플라이애쉬 콘크리트의 강도도 월등히 향상되었다.

Effect of Magnesium Sulfate on Product Inhibition of Sisomicin Production

  • Shin, Chul-Soo;Han, Sang-Hun
    • Journal of Microbiology and Biotechnology
    • /
    • 제5권2호
    • /
    • pp.96-99
    • /
    • 1995
  • Addition of l00mM $MgSO_4$ to a cell culture after 54 hours resulted in a 2.4-fold increase in the sisomicin titre compared to a control to which no $MgSO_4$ was added, and a considerable amount of intracellular sisomicin was liberated outside the cells. The occurrence of product inhibition in fermentation was confirmed by a reduction in net sisomicin production with increasing amounts of added sisomicin without addition of $MgSO_4$. All added sisomicin was bound to sisomicin-free cells in the absence of $MgSO_4$, whereas approximately 40% of added sisomicin was bound with the addition of l00mM $MgSO_4$. Under conditions of no enzmye synthesis, maintained by adding chloramphenicol to exclude product repression, sisomicin was produced in the presence of 100 mM $MgSO_4$ but little sisomicin was produced in the absence of $MgSO_4$.

  • PDF

Effect of Phosphoric Acid on the Electronic and Diffusion Properties of the Anodic Passive Layer Formed on Pb-1.7%Sb Grid of Lead-acid Batteries

  • El-Rahman, H.A. Abd;Salih, S.A.;El-Wahab, A.M. Abd
    • Journal of Electrochemical Science and Technology
    • /
    • 제2권2호
    • /
    • pp.76-84
    • /
    • 2011
  • Potentiostatic oxidation of Pb-1.7%Sb alloy used in the manufacture of grids of lead-acid batteries over the potential range from -1.0V to 2.3V in 5M $H_2SO_4$ in the absence and the presence of 0.4M $H_3PO_4$ and the self-discharge characteristics of the oxide layer formed is studied by electrochemical impedance spectroscopy (EIS). Depending on the potential value, sharp variations in resistance and capacitance of the alloy are recorded during the oxidation and they can be used for identification of the various substances involved in passive layer. Addition of $H_3PO_4$ is found to deteriorate the insulating properties of the passive layer by the retardation of the formation of $PbSO_4$. $H_3PO_4$ completely inhibits the current and impedance fluctuations recorded in $H_3PO_4$-free solutions in the potential range 0.5 V-1.7 V. These fluctuations are attributed to the occurrence of competitive redox processes that involve the formation of $PbSO_4$, $PbOSO_4$, PbO and $PbO_2$ and the repeated formation and breakdown of the passive layer. Self-discharge experiments indicate that the amount of $PbO_2$ formed in the presence of $H_3PO_4$ is lesser than in the $H_3PO_4$-free solutions. The start of transformation of $PbSO_4$ into $PbO_2$ is greatly shortened. $H_3PO_4$ facilitates the diffusion process of soluble species through the passive layer ($PbSO_4$ and basic $PbSO_4$) but impedes the diffusion process through $PbO_2$.

Development of LiFePO4/FePO4 Electrode for Electro-Osmotic Pump using Li+ Migration

  • Baek, Jaewook;Kim, Kyeonghyeon;Shin, Woonsup
    • Journal of Electrochemical Science and Technology
    • /
    • 제9권2호
    • /
    • pp.85-92
    • /
    • 2018
  • Olivine structure of $LiFePO_4$ (LFP) is one of the most commonly used materials in aqueous rechargeable lithium batteries (ARLBs), and can store and release charge through the insertion/de-insertion of $Li^+$ between LFP and FP. We have fabricated LFP and LFP/FP electrodes on titanium paper and studied their electrochemical properties in 2 M $Li_2SO_4$. The LFP/FP electrode was determined to be a suitable electrode for electo-ostmotic pump (EOP) in terms of efficiency in water and 0.5 mM $Li_2SO_4$ solution. Experiments to determine the effect of cations and anions on the performance of EOP using LFP/FP electrode have shown that $Li^+$ is the best cation and that the anion does not significantly affect the performance of the EOP. As the concentration of $Li_2SO_4$ solution was increased, the current increased. The flow rate peaked at $4.8{\mu}L/30s$ in 1.0 mM $Li_2SO_4$ solution and then decreased. When the EOP was tested continuously in 1.0 mM $Li_2SO_4$ solution, the EOP transported approximately 35 mL of fluid while maintaining a stable flow rate and current for 144 h.