• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.917-921
• /
• 2002

In this paper, we made different types of non-thermal plasma reactors such as Metal-particle reactor with $Al_2O_3$ to measure NOx removal characteristic and the dielectric effect for NOx removal. NOx removal rate is not so good when we use just dielectric of $Al_2O_3$ at the Metal-particle reactor, also we just put sludge pellets(100%) without Metal-particle reactor with $Al_2O_3$ and dielectric such as $TiO_2$, $BaTiO_3$ to measure the effect of sludge for NOx removal so that NOx removal rate is almost the same. However NOx removal rate is more than 90% in case of the reactor of composition shape used both dielectric of $Al_2O_3$ and sludge pellets at the same time. In case of the shape of plasma reactor with dielectric, the Metal-particle reactor with $Al_2O_3$, and the metal-particle reactor with both $Al_2O_3$ and dielectric such as $TiO_2$, $BaTiO_3$ at the same time, they are almost the same effect for NOx removal, so we made MNPR(Metal-particle Non-thermal Plasma Reactor with $Al_2O_3$) to reduce these kinds of demerits. Finally, we think MNPR should be much better than other reactors for NOx removal.

• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.449-457
• /
• 1996

The main purpose of this study was to investigate sulfur dioxide removal performance of flue gas desulfurization system utilizing a Spray Absorption/Drying Reactor. In this system, the size of droplets was considered the most significant factor and tested using a PDA system. Lime slurry flow rate, operating temperature, calcium/sulfur (Ca/S) ratio and applied air pressure were selected as major operation variables and tested/analyzed in terms of system performance. The results are as follows. 1. The $SO_2$ removal efficiencies were 49%, 74%, 85% for Ca$(OH)_2$ slurry flow rate of 10, 20, 30 ml/min, which implies that the increase of slurry flow rate improves removal efficiency. The optimum slurry flow rate in this study was, however, considered 20 ml/min because of constraints of system troubles and absorbent utilization. 2. As Ca/S ratio increased, $SO_2$ removal efficiency was observed to increase. 3. As air pressure, at the atomizing nozzole, increased from 3 to 5 $kg/cm^2, SO_2$ removal efficiency increased from 74% to 80%, because of droplet size reduction due to pressure increase during atomizing process and the increase of surface area, helping mass transfer between gas and liquid phase.

• 한국가스학회지
• /
• 제10권2호
• /
• pp.14-21
• /
• 2006

다공성 중공사막 분리막 기액접촉기을 이용한 황산화물 제거장치를 제작하고 다양한 상용 분리막과 자체 제작한 분리막을 이용하여 황산화물 제거 성능 실험을 수행하였다. 분리막을 이용한 황산화물 제거 성능 평가 결과 대단히 우수한 제거효율을 보였다. 중공사막을 이용하여 $SO_2$를 제거할 경우에 액막 저항을 낮출 수 있는 흡수제와 첨가제의 선정, 막 재질, 막 제조조건 등이 최적의 G-L Contactor개발에 중요한 변수로 나타났다. 향후 보다 소형화되고, 경제적이며 효율이 우수한 G-L Contactor System 개발에 대한 연구를 진행할 것이다.

• 한국안전학회지
• /
• 제6권4호
• /
• pp.26-33
• /
• 1991

To remove SO$_2$ from flus gas, cupric oxide, manganese oxide and iron oxide were studied with varying loading value. The experiment was carried out in a flow reactor and the reactants were prepared by impregnation method using alumina. The reaction temperature was varied from 30$0^{\circ}C$ to 45$0^{\circ}C$. Experimental results showed that all of these metal oxides were effective on SO$_2$ removal reaction and cupric oxide was the best reactant. The sample with 10wt％ loading value was better reactant than with 20wt％ because in case of 20wt％ loading, metal dispersion on the alumina surface was not uniform. And the SO$_2$ removal efficiency was increased with the reaction temperature.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권3호
• /
• pp.215-220
• /
• 1999

$SO_2$and CO gas removal characteristics of a wire-to-cylinder type nonthermal discharge plasma reactor in various applied voltage (-dc, ac, fast rising pulse and high frequency pulse) and a crossed dc magnetic field have been investigated. The experiment has been emphasized on the oxidizing characteristics of $SO_2$ and CO gas by $O_3$ and the applying of a crossed magnetic field, which would induce the cyclotronic and drift motions of electrons making the residual time longer in the removal airgap space. And it also would enhance the energy of electrons and the electrophysicochemical actions to remove the pollutant gases effectively. It is found thatthe corona onset voltage and the breakdown voltage were decreased with increasing the crossed magnetic field and decrease initial fed $SO_2$and CO concentration. As a result, a higher ozone generation and $SO_2$ and CO gas removal rate of 20[%] can be obtained with -dc, ac and fast rising pulse corona discharges in the crossed dc current-induced magnetic field. But high frequency pulse didn't show effect in applying of a crossed magnetic field.

• 청정기술
• /
• 제3권1호
• /
• pp.96-105
• /
• 1997

본 연구는 유,무연탄 혼합 유동층 석탄연소로에서 폐제지슬러지를 탈황제로 사용하였을 경우 석회석 입자크기, 주입공기 유속, Ca/S 몰비, 무연탄비, 층온도 등에 따른 $SO_2$ 제거 효율에 관해 연구하였으며, 실험결과는 다음과 같다. 폐제지슬러지의 입자크기는 탈황율에 매우 큰 영항을 주는 것으로 나타났으며, 입자크기 $1016{\mu}m$ 일 때 가장 높은 탈황율을 보였고, 주입되는 공기의 유속변화에 따른 탈황율에는 큰 차이가 없었다. Ca/S 몰비가 증가할수록 탈황율도 증가하였으며, Ca/S 몰비 3까지는 급격히 탈황율이 증가하였으나 3이상에서는 큰 차이가 없었으므로 Ca/S 몰비는 3이 적절한 것으로 나타났다. 또한, 층온도는 탈황율에 큰 영향을 주는 것으로 나타나 $800^{\circ}C$에서 가장 높은 탈황율을 보였으며, 무연탄비가 증가할수록 탈황율이 약간 증가하는 것으로 나타났다. 따라서, 유,무연탄 혼합연소시 폐제지슬러지는 매우 높은 탈황율을 보여 탈황제로서의 가능성을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.91-94
• /
• 2006

The way to shorten a construction period is considered to an very important technology development element as reducing the formwork removal periods with promoting strength revelation own concrete. This study executed experiment to review usability of early strength revelation chemical admixture which is judged in ways effective with premature removal of form about concrete. Use of early strength revelation AE water reducin admixture is apperaing so that strength revelation by early hydration promotions is excellent. The results of being applied proposed work process are that compressive strength are appeared more than 5MPa within 16 hours so that removal of vertical form was possible. the concrete compressive strength satisfied with a more than 2/3 of specified concrete strength for removal of horizontal form are appeared in 42 hours of 27 MPa proportioning strength, in 36 hours of 30, 35 MPa proportioning strength so that the 6 days cycle time of concrete structural frame work is cut by 2 days as shortening delayed period in works of removing slab forms. So construction cost reductions and a construction period shortening are judged so that it is possible.

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.247-252
• /
• 2003

In this paper, we made four types of metal particle $Al_2$O$_3$ barrier reactors with and without dielectric of BaTiO$_3$ between metal particle and $Al_2$O$_3$ barrier to investigate NOx removal characteristic and the effect of dielectric on Nox removal. And Nox removal rate is measured when sludge pellets are put at down stream of plasma reactor. Nox removal rate in the reactor with $Al_2$O$_3$ barrier is much better than that in the reactor without $Al_2$O$_3$ barrier, Nox removal rate is not so good in metal particle-Al$_2$O$_3$ barrier reactor with BaTiO$_3$ between metal particle and $Al_2$O$_3$ barrier, however, Nox removal rate is about 40% in metal particle-Al$_2$O$_3$ barrier reactor with TiO$_2$. The most of NO is conversed to NO$_2$ in these kind of reactor. When sludge pellets are put at down stream of plasma reactor, Nox removal rate is greatly improved up to 90%. It indicates that sludge pellets have great effect on the NO$_2$ removal and the improvement of Nox removal rate, however, dielectric materials between metal particle and $Al_2$O$_3$ barrier have not effect. Organic materials included in sludge may react with NO$_2$ and ozone so that Nox removal rate is greatly improved.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.512-517
• /
• 2009

순산소 연소에서 $SO_2$ 농도는 배가스의 재순환으로 인해 기존의 공기연소에 비해 3배 이상 높게 나타나고, $CO_2$ 농도와 $SO_2$ 농도가 높기 때문에 탈황현상이 기존의 공기 연소와는 다르게 나타난다. 본 연구에서는 순산소 연소조건에서 로내탈황 특성을 알아보기 위해 Drop Tube Furnace(DTF)를 이용하여, 반응온도, 유입 $SO_2$ 농도 그리고 Ca/S 비 등의 운전변수에 따른 $SO_2$ 제거효율을 측정하였으며 수분의 영향에 대해서도 알아보았다. 반응온도, 유입 $SO_2$ 농도 그리고 Ca/S 비가 증가함에 따라 $SO_2$ 제거효율은 증가하였고 유입가스 내 수분이 존재할 경우 $SO_2$ 제거효율은 약 4~6% 증가하는 것으로 나타났다.

• 한국물환경학회지
• /
• 제31권6호
• /
• pp.619-624
• /
• 2015

This study experimentally determined the effect of titanium tetrachloride (TiCl₄) concentration ([TiCl₄]) (0.25-0.55 mM) and initial pH (3-11) on phosphorus (P) removal in synthetic wastewater (2 mg P/L). The P removal efficiency increased when [TiCl₄] increased. The P removal efficiency showed a parabolic trend with an inflection point at pH 7. At the molar ratio of TiCl₄ and P>6.2, the P removal efficiency was over 90% and the residual P concentration was less than 0.2 mg/L. Within the design boundaries, the complete P removal could be achieved at 7.0≤initial pH≤8.5 and 0.43≤[TiCl₄]≤0.55 mM. The final pH was over 5.8 at initial pH≥7.7 and [TiCl₄]≥0.35 mM. The results showed that TiCl4 was effective in P removal in water so that it could be an alternative chemical for P removal.