• 대한화학회지
• /
• 제27권3호
• /
• pp.183-188
• /
• 1983

이산화황의 산화반응을 10 mol % $Ni-doped\;{\alpha}-Fe_2O_3$를 촉매로 하여 반응온도 범위 $320{\sim}440{\circ}C$에서 여러 산소 및 이산화황의 부분압으로서 반응속도를 측정하였다. 위 온도 영역에서 $SO_2$ 산화반응의 활성화에너지 값은 13.8 $kcal{\cdot}mol^{-1}$로서 얻어졌다. 반응속도 데이타는 산소에 대해서 0.5차, 이산화황에 대해서는 1차로서 전반응차수는 1.5차를 나타내었다. 이산화황과 산소를 여러 압력으로서 도입하여 전기전도도를 측정하였다. 반응속도 데이타와 전기전도도 데이타로 부터 반응기체들의 산화물계상에서 흡착메카니즘을 제안하였고, 촉매상에서 $SO_2$의 산화반응 메카니즘을 제안하였다. 산소와 이산화황은 이온상태로서 흡착하며, 산소는 니켈 dope로 인해 형성된 산소공위에 이산화황은 격자 산소에 흡착하였다. 반응속도 데이타와 전기전도도 데이타로부터 이산화황의 산화반응속도를 결정짓는 단계는 이산화황이 격자산소에 흡착하는 과정임을 알았다.

• KSBB Journal
• /
• 제15권2호
• /
• pp.156-161
• /
• 2000

해양에서 분리한 Streptomyces sp. BH-405의 배양액으로부터 정제하여 얻은 항산화 활성이 우수한 획분 band 2 에 대하여 사람 Low Density Lipoprotein(LDL)의 산화 억제 효과에 대하여 실험하였다. Streptomyces sp. BH-405의 배양액으로부터 분리 정제한 획분 band 2는 LDL에 대한 $5\mu\textrm{m}$ $CuSO_4$ 의 유도 산화를 측정한 결과 100 및 200 $\mu\textrm{g}$/mL에서 LDL의 산화억제 효과가 높았다. 그리고, band 2를 이용한 macrophage 및 J774 유도 LDL의 수식에 대한 항상화 효과도 native LDL에 비하여 높았다. 이때 같은 농도의 band 2를 첨가하여 산화 LDL의 전기영동의 이동거리를 측정한 결과 native LDL보다는 약간 높았으나 Oxid LDL의 대조군보다는 이동거리가 낮으며 공액2중결합의 생성억제 효과도 있었다. 사람 LDL의 산화에 대하여 macrophage 및 내피세포를 이용하여 125I-LDL 산화에 대하여 band 2를 각각 100 및 200 $\mu\textrm{g}$/mL씩 첨가하여 실험한 결과 사람 LDL의 분해는 대조구보다 낮았으며 용량 의존형의 결과를 나타내었다.

• 한국환경과학회지
• /
• 제11권12호
• /
• pp.1235-1242
• /
• 2002

The purpose of this study is to estimate wet deposition flux and to investigate wet deposition characteristics by using the ADOM model. Wet deposition flux of highly reactive $SO_2$ is estimated by applying observed meteorological parameters and concentrations of chemical species to the ADOM model. Wet deposition is largely dependent on large scale precipitation and cloud thickness. Wet deposition flux of sulfate depends on $SO_2$ oxidation in clouds. When large amount of $SO_2$ is converted to sulfate, deposition flux of sulfate increases, but wet deposition flux of $SO_2$ is small. On the whole, the pattern of sulfate wet deposition flux agrees with the typical pattern of sulfate wet deposition that is high in the summer(July) and low in the winter(January).

• 한국표면공학회지
• /
• 제43권1호
• /
• pp.36-40
• /
• 2010

The SiO vapor that was generated from a mixture of Si and $SiO_2$ was reacted at $1350^{\circ}C$ for 2 h under vacuum with carbon nanofibers to produce SiC nanofibers having an average diameter of 100~200 nm. In order to understand the gas corrosion behavior, SiC nanofibers were exposed to air up to $1000^{\circ}C$. SiC oxidized to amorphous $SiO_2$, but its oxidation resistance was inferior unlike bulk SiC, because of high surface area of nanofibers. When SiC nanofibers were exposed to Ar-1% $SO_2$ atmosphere, SiC oxidized to amorphous $SiO_2$, without forming $SiS_2$, owing to the thermodynamic stability of $SiO_2$.

• 한국표면공학회지
• /
• 제41권1호
• /
• pp.16-22
• /
• 2008

Anodizing to form oxide layers on the pure titanium was performed in the electrolyte containing 1.5M $H_2SO_4$, 0.2M $H_3PO_4$, and 2.5wt.% $CuSO_4$ using the ac-biased arc anodizing technique. Titanium oxide layers anodized with different applied voltages, voltage-elevating rates, and anodizing times were investigated. In addition, thermal oxidation test under an atmospheric environment for the arc-anodized specimens was carried out. The thickness of oxide layers were not affected by the voltage-elevating rates, but increased slightly with the increase of anodizing times. The thickness of oxide layers were increased with the increase of voltages, and increased remarkably in the condition of 200V. The size and number of the pore observed in the center of the porous cell were decreased with increase of applied voltage. From the result of thermal oxidation test, it revealed that oxide layer formed by arc anodizing more effective to prevent oxidation of pure titanium.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.412-420
• /
• 2016

Effect of $H_2S$ on reactivity of oxygen carrier was measured and discussed using fluidized bed reactor and SDN70 oxygen carrier. We could get 100% of fuel conversion and $CO_2$ selectivity even though $H_2S$ containing simulated syngas was used as fuel for reduction. Absorbed sulfur was released during oxidation and $N_2$ purge step after oxidation as $SO_2$ form. We could get 100% of fuel conversion and $CO_2$ selectivity during cyclic reduction-oxidation tests up to 10th cycle. However, only 6~7% of sulfur can be removed during oxidation and $N_2$ purge step and 93~94% of sulfur was accumulated in the oxygen carrier. Therefore we could conclude that total removal of sulfur was not possible. $SO_2$ emission during oxidation decreased as the number of cycle increased. Therefore we could expect that the reactivity of oxygen carrier will be decreased with time.

• 신재생에너지
• /
• 제16권4호
• /
• pp.83-91
• /
• 2020

In this study, the reusability of the Fenton oxidation solution was evaluated to reduce the cost of the pretreatment process. Biomass was sequential subjected to Fenton oxidation-hydrothermal treatment and enzymatic hydrolysis to produce monosaccharides. The liquid solution recovered after Fenton oxidation contained OH radicals with a concentration of 0.11 mol/L. This liquid solution was reused for a new Fenton oxidation reaction. After Fenton oxidation, hydrothermal treatment was performed under the same conditions as before, and 9.34-13.63 g/L of xylose was detected. This concentration was slightly lower than that of a fresh Fenton oxidation solution (16.51 g/L) but was higher than that obtained by hydrothermal treatment without Fenton oxidation (2.72 g/L). The degradation rate during hydrothermal pretreatment involving Fenton oxidation was 36.02%, which decreased (29.24-31.05%) slightly when the liquid solution recovered after Fenton oxidation was reused. However, the degradation rate increased compared to that measured from hydrothermal treatment without Fenton oxidation (15.21%). Moreover, the yield after enzyme hydrolysis decreased in the following order: fresh Fenton oxidation-hydrothermal treatment (89.64%) > Fenton oxidation with reused solution-hydrothermal treatment (74.84%) > hydrothermal treatment without Fenton oxidation (32.05%).

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.15-21
• /
• 2019

In the mine exploration sites, sustainable treatment system of mine water with energy saving and minimized chemical additives is required. Since most of the mine water contains highly-concentrated ferrous ion, it is necessary to study on the removal method of iron ions. We propose the system consisting of two processes; precipitation process by air oxidation using solid catalyst-modified magnetite and separation process combining gravitational sedimentation and magnetic separation using a permanent magnet. Firstly, in the precipitation process (a former process of the system), we succeeded to prepare solid catalyst-modified magnetite. Air oxidation using solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material showed high iron removal capability. Secondly, in the separation process (latter process of the system), solid catalyst-modified magnetite using $Fe_2(SO_4)_3$ as a starting material can be separated by a superconducting bulk magnet and a permanent magnet.

• 대한본초학회지
• /
• 제20권4호
• /
• pp.103-112
• /
• 2005

Objectives : In order to develop effective and safe anti-oxidation, the effects of Menthae Herba (M. spicata L. and M piperita L.) were examined. Methods : M. spicata L. and M. piperita L. of Menthae Herba were used to make water extracts and methanol extracts, and then its anti-oxidative effects were compared in vitro. Results : 1. M. spicata L. was stronger than M. piperita L. in anti-oxidative effects of methanol extracts, and water extracts showed similar anti-oxidation effects. 2. Water extracts of M. spicata L. was stronger than M. piperita L. showed a stronger superoxide anit-oxidation than the same-density ascorbic acid, so that water extracts were proved to be stronger than methanol extracts. 3. Methanol extracts' DPPH anti-oxidation was similar in M. spicata L. and M piperita L.. As for water extracts, M. spicata L. showed higher anti-oxidation and M. piperita L. had no anti-oxidation. 4. As for anti-oxidation of LDL and linoleic acid of methanol extracts, both M. spicata L. and M. piperita L. were stronger than a-tocopherol. As for the water extracts, these two showed similar level of anti-oxidative effect on linoleic acid, which is weaker that mehtanol extracts. 5. M. spicata L. includes more phenol than M. piperita L. Conclusions : Menthae Herba (M. piperita L. M. spicata L.) had anti-oxidation effect, so that it can be medically developed for anti-oxidation.

• 한국대기환경학회지
• /
• 제13권6호
• /
• pp.487-495
• /
• 1997

The most desirable diesel oxidation catalyst (DOC) should have the properties of oxidizing CO, HC and SOF effectively at low exhaust gas temperature while minimizing the formation of sulfate at high exhaust gas temperature. Precious metals such as platinum and palladium have been known to be sufficiently active for oxidizing SOF and also to have high activity for the oxidation of sulfur dioxide $(SO_2)$ to sulfur trioxide $(SO_3)$. There is a need to develop a highly selective catalyst which can promote the oxidation SOF efficiently, on the other hand, suppress the oxidation of $SO_2$. In this study, a Pt-V catalyst was prepared by impregnating platinum and vanadium onto a Ti-Si wash coated ceramic monolith substrate. A prepared Pt-V catalytic converter was installed on a heavy duty diesel engine and the effect of fuel sulfur on particulate matter (PM) of heavy duty diesel engine was measured. The effect of fuel sulfur on PM of Pt-V was also compared with that of a commercialized Pt catalyst currently being used in some of the heavy duty diesel engines in advanced countries. Only 1 $\sim$ 3% of sulfur in the diesel fuel was converted to sulfate in PM for the engine without catalyst, but almost 100% of sulfur conversion was achieved for the engine with Pt catalyst at maximum loading condition. In the case of Pt-V catalyst, there was no big difference in conversion with the base engine even at maximum loading condition. The reason of SOF increase according to the increase of suflate emission was identified as the washing off effect of bound water in sulfate.