• Journal of the Korean institute of surface engineering
• /
• v.50 no.3
• /
• pp.206-211
• /
• 2017

$BiNbO_4:RE^{3+}$ (RE = Dy, Eu, Sm, Tb) phosphors were prepared by solid-state reaction at $1100^{\circ}C$ and their structural, photoluminescent, and morphological properties were investigated. XRD patterns exhibited that all the synthesized phosphors exhibited a triclinic system with a dominant (210) diffraction peak, irrespective of the type of activator ions. The surface morphologies of rare-earth-ion-doped $BiNbO_4$ phosphors were found to depend strongly on the type of activator ions. The $Eu^{3+}$ and $Dy^{3+}$ doped $BiNbO_4$ phosphors revealed a strong red (613 nm) emission resulting from the $^5D_0{\rightarrow}^7F_2$ transition of $Eu^{3+}$ and a dominant yellow (575 nm) emission originating from the $^4F_{9/2}{\rightarrow}^6H_{13/2}$ transition of $Dy^{3+}$ respectively, which were the electric dipole transitions, indicating that the activator ions occupy sites of non-inversion symmetry in the $BiNbO_4$ phosphor. The main reddish-orange emission spectra of $Sm^{3+}$-doped $BiNbO_4$ phosphors were due to the $^4G_{5/2}{\rightarrow}^6H_{7/2}$ (607 nm) magnetic dipole transition, indicating that the $Sm^{3+}$ ions were located at inversion symmetry sites in the $BiNbO_4$ host lattice. As for $Tb^{3+}$-doped phosphors, green emission was obtained under excitation at 353 nm and its CIE chromaticity coordinates were (0.274, 0.376). These results suggest that multicolor emission can be achieved by changing the type of activator ions incorporated into the $BiNbO_4$ host crystal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.88-93
• /
• 2021

SAW (Submerged Arc Welding) is often used for ship construction or welding pressure vessels and involves spraying a flux in a powder form to a welding site to a certain thickness and continuously supplying electrode wires therein. This welding method enables high current welding up to 1,500 to 3,000 A. Arc efficiency is higher than 95% and the technique allows clean work as it creates less welding fume, which is composed of fine metal oxide particles, and the arc beam is not exposed. In this study, SM490C-TMC thick plates were heterogeneously welded by SAW. Mechanical properties of welds were measured, and welds were assessed macroscopically and for adhering magnetic particles. The following conclusions were drawn. Bending tests showed no spots exploded on sample surfaces or any other defect, and plastic deformation testing confirmed sufficient weld toughness. These results showed the 1F welding method has no shortcomings in terms of bending performance.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.73-86
• /
• 2003

Endothelins secreted from keratinocytes are intrinsic madiators for human melanocytes in UVB-induced pigmentation. Antimelanogenic ingredient, 1,2-Ο-diferulylglycerol(SM709) isolated from bamboo extract inhibited the melanin synthesis of Bl6F10 melanoma cells by 62%. To understand the cellular mechanism of antimelanogenic activity of SM709 in human melanocytes, the effects of SM709 on the ET-l-induced $Ca^{2+}$ mobilization were investigated. ET-l receptors in human melanocytes were characterized by using specific antagonist and found that ET-l increased intracellular $Ca^{2+}$ by activating ET-B receptor. SM709 completely blocked the ET-l-induced intracellular $Ca^{2+}$ increase and its inhibitory effect showed dose- and time- dependent manners. To investigate the role of SM709 on intracellular $Ca^{2+}$ store, when the $Ca^{2+}$ store was partially depleted by thapsigargin; a specific inhibitor of ER-type $Ca^{2+}$-ATPase, caffeine-induced $Ca^{2+}$ mobilization did not changed in the presence or absence of SM709, suggesting that SM709 has no effect on the $Ca^{2+}$ store. It is known that LPA receptor and P$_2$ receptor are linked to InsP$_3$ second messenger system. When these receptors in melanocytes were activated by LPA and ATP, the intracellular $Ca^{2+}$ signaling was observed even in the presence of SM709. From the above results, it can be suggested that SM709 has an antimelanogenic activity by antagonizing the ET-B receptor, resulting in subsequent intracellular $Ca^{2+}$ signaling, in UV induced pigmentation.nduced pigmentation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.187-193
• /
• 2014

Dental caries are one of the most common oral diseases and Streptococcus mutans (S. mutans) plays an important role in the initiation and progression of dental caries. Oral malodor is primarily the result of microbial metabolism such as Porphyromonas gingivalis (P. gingivalis) that produce volatile sulfur compounds (VSCs), causing oral malodor. Prevotella intermedia (P. intermedia) is known as typical periodontopathic bacteria, and periodontal disease is chronic inflammatory disease that leads to damage of gingival connective tissue and alveolar bone, eventually loss of teeth. In this study, we investigated antimicrobial effect of mouthwash containing cetylpyridinium chloride (CPC), sodium fluoride (NaF), green tea water extract and pine needles water extract against cariogenic and periodontopathic bacteria sucn as S. mutans, P. gingivalis and P. intermedia. As a result, the reduction ratios of S. mutans and P. gingivalis were 4.00 Log and 4.68 Log reduction for 30 s, and P. intermedia were 2.40 Log reduction for 30 s and 2.70 Log reduction for 60 s. Dentocult SM Strip mutans (SM Strip) provides easy detection of visual data showing a significant inhibition on S. mutans. In conclusion, we expected that mouthwash containing CPC, NaF, green tea water extract and pine needles water extract could help preventing the dental disease like dental caries and oral malodor.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.179-184
• /
• 2002

Polymer electrolyte films consisting of poly (vinylidenefluoride-hexafluoro-propylene) (PVdF-HFP) $H_3PO_4$and a mixture of ethylene carbonate(EC), $\gamma$-butyrolactone(BL) and dimethylcarbonate (DMC) were examined in order to obtain the best compromise between high protonic conductivity, homogeniety and dimensional stability. Measurements of differential scanning calorimetry and ionic conductivity have been carried out for various compositions. The highest proton conductivity of 7.3 $\times$$10^{-3}Sm^{-1}$ at $30^{\circ}C$ were obtained for a film of 30(PVdF-HFP) + 50EC/DMC + 20H$_3$PO$_4$. From the thermal study, it has been found that the PVdF-HFP gels are stable up to $80^{\circ}C$, and the $H_3PO_4$ enhances the miscibility of the polymer and the solvent by interacting sensitively with polymer segments.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.448-457
• /
• 1999

Citrus fruits are consumed worldwide due to their unique flavor and nutrition value. It is necessary to remove the haze material as well as to minimize the loss of major compounds such as organic acids, sugars, and ascorbic acid in membrane processes for clarification of juice. The objective of our research was to select the best membrane among one surface filter (Whatman No.4) and five microfiltration filters (GF/A, GF/D, GF/F, Gelman, and SM). Tangerine fresh blended with three times of water was partially clarified with 170 mesh followed by prefiltration in a Samduck filtration system. The best membrane was selected by measuring the amounts of major compounds in the permeates as well as the flux which were statistically analyzed with SAS program. The foulants on the membrane surface were observed by SEM. The flux of GF/A and GF/F decreased with time at probability 0.10. Gelman, SM, and GF/D maintained the stable flux. Gelman showed the highest total scores including nutritive value (the amounts of citrate, malate, and ascorbic acid) and purchasing need (brix and color). Therefore, the microfiltration membrane process was a very effective method in tangerine juice clarification and Gelman type A/E was proved to be the best membrane among the five microfiltration membranes.

• Physical Therapy Korea
• /
• v.19 no.2
• /
• pp.20-28
• /
• 2012

The lumbar multifidus muscle, which can be separated into deep fascicles (DM) and superficial fascicles (SM), is important for lumbar segmental stability. However, no previous studies have investigated the effect of lumbar stabilization exercises on the thickness of DM and SM. Thus, the purpose of this study was to assess DM thickness after three different lumbar segmental stabilization exercises. In total, 30 healthy male participants were recruited and randomly assigned to one of three exercise groups: hollowing in the quadruped position (H-Quad), contralateral arm and leg lift (CALL), and bilateral arm and leg lift (BALL). Each lumbar segmental stabilization exercise was conducted over 4 weeks. Ultrasonography was used to compare the DM and SM thickness before and after the 4 weeks of exercise. A mixed-model analysis of variance using Scheffe's post-hoc test was used for statistical analysis. The results showed a significant effect for the measurement time (before vs. after 4 weeks of exercise) in the DM (F=31.26, p<.05) and SM (F=4.56, p<.05). At the end of the 4 weeks, the DM thickness had increased significantly in the H-Quad exercise group, and the SM thickness had increased significantly in the CALL and BALL exercise groups. Also in the BALL exercise group, the SM thickness was greater compared with that in the H-Quad exercise group. These findings suggest that the thickness of the DM and SM were increased by different types of lumbar segmental stability exercise after 4 weeks.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.149-154
• /
• 2015

A new Phalaenopsis cultivar 'SM 333' was bred by Sangmiwon Orchid, Korea, which produces young plants through tissue culture techniques. The new cultivar 'SM 333', showing the phenotype of multiflora with pink color and small, multibranching-type characteristics, was derived from crossing between Phalaenopsis 'Odoriko' and 'Be Tris'. An elite individual number '02-03-33' later termed 'SM 333' was selected among about 300 individual progenies, based on an intensive selection process covering vegetative and flowering distinctiveness over more than 2 years. In year 2004-2005, the 1st and 2nd characteristic analyses were carried out through performance and uniformity tests. 'SM 333' shows flower color that is bright clean pink (RHS # RP69D) and flower shape that is formal type with 5.0 and 5.8 cm in flower height and width, respectively. 'SM 333' is regarded as raceme flower type suitable for the small casual flower market. The leaves of 'SM 333' grow horizontally and about 20.8 cm in length and 6.5 cm in width. This cultivar also possesses no genetic variation, and is amenable to fast in vitro propagation and easy growth due to its vigorous growth habit. This 'SM333' was registered (Reg. # 2916) with Korea Seed & Variety Service (KSVS) on 1st December, 2009, and the plant breeder's right is currently controlled by Sangmiwon Orchid Company, Korea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.165-165
• /
• 2013

희토류 발광 물질은 4f 껍질에 위치하는 전자의 독특한 특성 때문에 발광 소자와 디스플레이에 그 응용성을 확장하고 있다. 본 연구에서는 고효율의 적색과 주황색 형광체를 합성하기 위하여 모체 격자 CaNb2O6에 희토류 이온인 유로퓸과 사마륨을 치환 고용하여 최적의 합성 조건을 조사하였다. Ca1-1.5xNb2O6:REx3+ (RE=Eu, Sm) 형광체 분말 시료는 고상반응법을 사용하여 활성제 이온인 Eu3+와 Sm3+의 농도비를 0, 0.01, 0.05, 0.10, 0.15, 0.20 mol 로 변화시키면서 합성하였다. 초기 물질 CaO, Nb2O5, Eu2O3와 Sm2O3을 화학 적량으로 측정하고, 400 rpm의 속도로 24시간 밀링 작업을 수행한 후에, 건조기 $60^{\circ}C$에서 28시간 건조하고, 시료를 막자 사발에서 갈아 세라믹 도가니에 담아 튜브형 전기로에서 분당 $5^{\circ}C$의 비율로 승온시켜 $500^{\circ}C$에서 5시간 동안 하소와 $1,100^{\circ}C$에서 6시간 소결하여 합성하였다. Eu3+가 도핑된 경우에, 발광 스펙트럼은 Eu3+ 이온의 농도비에 관계없이 강한 적색 발광 스펙트럼이 616 nm에서 관측되었다. 이외에도, 596 nm와 708 nm에서 상대적으로 발광 세기가 약한 주황색 발광과 적색 발광 신호가 검출되었으며, 541 nm에서는 매우 약한 녹색스펙트럼이 관측되었다. Eu3+ 이온의 농도비에 0.01 mol에서 0.15 mol로 증가함에 따라 주발광 신호의 세기는 점점 증가하였으며, 0.15 mol에서 최대 발광 세기를 나타내었다. Eu3+ 이온의 농도비가 0.20 mol 로 더욱 증가함에 따라 주 피크의 세기는 농도 소강 현상에 의하여 현저히 감소함을 보였다. 한편, 주된 흡광 스펙트럼은 279 nm에서 나타났는데, 이것은 전하전달밴드 신호이다. Sm3+가 도핑된 형광체 분말의 발광 스펙트럼은 모든 시료의 경우에 613 nm에서 강한 적주황색 발광 스펙트럼이 관측되었고, 상대적으로 세기가 약한 570 nm와 660 nm에 피크를 갖는 황색과 적색 발광 스펙트럼이 발생하였다. 흡광과 발광 스펙트럼의 최대 세기는 0.05 mol에서 나타났으며, Sm3+ 이온의 농도비가 더욱 증가함에 따라 흡광과 발광 세기는 급격하게 감소하였다.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.