• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1195-1196
• /
• 2015

최근 급격한 산업사회의 발달로 인해 전력기기의 종류와 설치개수가 꾸준히 증가하고 있다. 수많은 고전압 전력기기의 운용으로 인해 발생되는 온실가스는 지구온난화와 같은 환경파괴를 유발시키는 등의 문제를 발생시키고 있다. 고전압 전력기기의 전기적 절연을 위해 주로 사용되는 SF6와 같은 기체 절연체는 온실가스를 유발시키며, 현재 여러 나라에서는 고전압 전력기기로부터 방출되는 CO2의 양을 최소화하기 위한 많은 연구가 진행되고 있다. 특히, 일본 교토에서 180여개의 국가가 온실가스 감축의 의무를 나누고자 교토의정서를 채택하였고, 온실가스를 유발하는 SF6를 대체할 수 있는 친환경 기체 절연체에 대한 연구가 활발히 진행 중이다. 그 중에서도 본 연구에서는 친환경 기체 절연체인 Dry-air의 절연파괴와 부분방전 개시전압 특성을 분석하였다. 다양한 구 전극의 크기와 전극 사이 간격 조건에서 AC 절연파괴 및 부부방전 개시전압에 대한 실험을 수행하였다. 또한, 유한요소해석을 통해 산출한 전계 이용률을 고려하여 절연파괴와 부분방전 개시전압에 대한 특성을 분석하였다. 실험결과, 구 전극의 크기와 전극 사이 간격이 증가할수록 절연파괴와 부분방전 개시전압의 크기가 커지는 것을 알 수 있으며, 부분방전이 먼저 개시되고 절연파괴로 이어는 경향을 확인할 수 있었다. 또한, 전계 이용률이 0.52 이상에서는 부분방전이 개시되지 않고 곧바로 절연파괴로 이어지는 것을 확인할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1532-1533
• /
• 2011

고압배전반과 같은 고전압 전력기기의 절연매질로는 고체 절연매질이 사용되기도 하지만 주로 공기나 $SF_6$와 같은 기체가 사용된다. 공기를 절연매질로 사용하고 있는 고압배전반과 같은 경우에는 장시간 운전 시 먼지나 수분 등과 같은 이물질에 의한 열화현상이 보고되고 있으며, $SF_6$를 사용하는 고압배전반의 경우에는 최근 온실효과와 같은 환경오염의 원인으로 지목되고 있는 등의 문제점을 가지고 있다. 따라서 이와 같은 열화현상이나 환경오염 유발과 같은 문제점을 해결하기 위한 방안 중의 하나로서 공기 중의 수분을 제거한 dry air를 이용한 친환경 고압배전반의 개발에 관한 연구가 활발히 이루어지고 있다. 본 연구에서는 dry air의 절연내력특성에 관한 실험을 수행하여 일반 공기의 절연내력특성과 비교하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.248-249
• /
• 2002

The gaseous molecular condensation retardation by laser excitation has been known, but with limited success. Condensation inhibition between the gas phase molecules by laser excitation was clearly shown in many experiments.(1)-(2) However, surface condensation inhibition of the excited molecules has been controversial for the last several decades.(3)-(4) In 1994, S. J, Sibener and Y. T. Lee published an experimental evidence of the internal energy dependence of the surface condensation of gaseous $SF_{6}$ and $CCl_4$ molecules. (omitted)

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.16-22
• /
• 2008

We studied plasma etching of polycarbonate in $O_2/SF_6$, $O_2/N_2$ and $O_2/CH_4$. A capacitively coupled plasma system was employed for the research. For patterning, we used a photolithography method with UV exposure after coating a photoresist on the polycarbonate. Main variables in the experiment were the mixing ratio of $O_2$ and other gases, and RF chuck power. Especially, we used only a mechanical pump for in order to operate the system. The chamber pressure was fixed at 100 mTorr. All of surface profilometry, atomic force microscopy and scanning electron microscopy were used for characterization of the etched polycarbonate samples. According to the results, $O_2/SF_6$ plasmas gave the higher etch rate of the polycarbonate than pure $O_2$ and $SF_6$ plasmas. For example, with maintaining 100W RF chuck power and 100 mTorr chamber pressure, 20 sccm $O_2$ plasma provided about $0.4{\mu}m$/min of polycarbonate etch rate and 20 sccm $SF_6$ produced only $0.2{\mu}m$/min. However, the mixed plasma of 60 % $O_2$ and 40 % $SF_6$ gas flow rate generated about $0.56{\mu}m$ with even low -DC bias induced compared to that of $O_2$. More addition of $SF_6$ to the mixture reduced etch of polycarbonate. The surface roughness of etched polycarbonate was roughed about 3 times worse measured by atomic force microscopy. However examination with scanning electron microscopy indicated that the surface was comparable to that of photoresist. Increase of RF chuck power raised -DC bias on the chuck and etch rate of polycarbonate almost linearly. The etch selectivity of polycarbonate to photoresist was about 1:1. The meaning of these results was that the simple capacitively coupled plasma system can be used to make a microstructure on polymer with $O_2/SF_6$ plasmas. This result can be applied to plasma processing of other polymers.

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.810-816
• /
• 2009

To identify effective food packaging compounds that could significantly affect the freshness of stored food, the efficiency and performance of porous polypropylene film containing mustard oil as a freshness maintenance ingredient was studied by GC-MS analysis and storage testing of bread. AITC (allyl-isothiocyanate)-emitting properties of films impregnated with mustard oil were evaluated by GC-MS. AITC was extracted from mustard oil, and used as a vapor as an effective antimicrobial agent. Films were prepared under four different conditions (the film types were abbreviated 25SF1, 25SF2, 50LF, and IAF) and the amounts of AITC inside vinyl packs constructed using the four films were measured. The results showed that the 25SF2 film (width 25 mm, length 20 cm) yielded a greater amount of AITC than did the 50LF film (width 50 mm, length 20 cm). We confirmed that the amount of gas emission showed better between layer and layer of the film side than the internal film. In storage testing using various films at $35^{\circ}C$ for 25 days, 25SF2 film provided excellent preservation of bread compared with 50LF film. This was in line with the fact that 25SF2 film yielded the highest amount of AITC. Emission capacities AITC of 2 cm film were measured using bottles various volumes (43 mL, 500 mL, 1000 mL) and both closed and open systems. The AITC content of the film in 43 mL bottle was much higher than that yielded by other films in the closed system, and AITC was rapidly emitted, with relatively low residual gas emission after 4 days in an open system. Mustard oil is a useful freshness maintenance ingredient hence, analysis of AITC emission kinetics from various films were helpful to develop films with optimal antimicrobial effects, and will allow application of such films in food packaging systems.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.277-284
• /
• 2013

Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under thermal chemical vapor deposition system. The Ni layer on the $SiO_2$ substrate was used as a catalyst for the formation of the carbon coils. The characteristics (formation densities, morphologies, and geometries) of the as-grown carbon coils on the substrate with or without the $H_2$ plasma pretreatment process were investigated. By the relatively short time (1 minute) $H_2$ plasma pretreatment on the Ni catalyst layered-substrate prior to the carbon coils synthesis reaction, the dominant formation of the carbon microcoils on the substrate could be achieved. After the relatively long time (30 minutes) $H_2$ plasma pretreatment process, on the other hand, we could obtain the noble-shaped geometrical nanostructures, namely the formation of the numerous carbon nanocoils along the growth of the carbon microcoils. This noble-shaped geometrical nanostructure seemed to play a promising role as the good catalyst support for holding the very tiny Ni catalyst grains.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.38.2-38.2
• /
• 2009

마이크로노즐은 우주공간에서 인공위성의 자세를 바로잡는 데 필요한 마이크로 로켓에 들어가는 필수적인 부품이다. 마이크로 노즐은 또한 나노입자 적층 시스템(nano-particle deposition system, NPDS)에 들어갈 수 있다. NPDS는 세라믹 또는 금속 나노분말 입자를 노즐을 통해 초음속으로 가속시킨 뒤 상온에서 이를 기판에 적층시키는 새로운 시스템이다. 본 연구의 목표는 NPDS에 쓰이는 노즐을 일반적인 반도체 공정을 이용하여 마이크론 스케일의 목을 갖도록 한 마이크로노즐을 제작하는 데 있다. 보쉬 공정은 이러한 마이크로노즐을 제작하는데 필수적인 공정으로, 유도결합플라즈마를 이용해 실리콘 웨이퍼를 식각시키는 기술을 말한다. 보쉬 공정에 사용되는 플라즈마 기체는 $SF_6$와 $C_4F_8$인데, 이 두 가지 기체를 번갈아가면서 사용하여 실리콘 웨이퍼를 이방성 식각하는 것이 그 특징이다. 보쉬 공정에는 다양한 변수가 존재하며 이를 적절히 통제하면 마이크로노즐에 적합한 프로파일을 실리콘 웨이퍼 내에 형성시킬 수 있다. 본 연구에서는 보쉬 공정을 이용하여 3차원 마이크로 노즐을 제작하였다. 기존에 반응성이온식각(deep reactive ion etching, DRIE) 공정을 통해 마이크로노즐을 제작한 사례가 많이 보고되었지만 이들은 모두 2차원적으로 마이크로노즐을 제작하였다. 2차원적으로 제작한 마이크로노즐은 마이크로 로켓에 주로 사용되었지만, 초음속으로 가속된 분말이 노즐의 형상으로 인한 유체 흐름의 불안정성 때문에 NPDS에서는 오래도록 사용할 수 없다는 문제점이 있다. 그러므로 본 연구에서는 마이크로노즐을 3차원 형상으로 제작함으로써 이러한 문제점을 해결하고자 하였다.

• Ultrasonography
• /
• v.32 no.1
• /
• pp.59-65
• /
• 2013

Purpose: The purpose of this study is to establish the methodology regarding synthesis of ultrasound contrast agent imaging, and to evaluate the characteristics of the synthesized ultrasound contrast agents, including size or degradation interval and image quality. Materials and Methods: The ultrasound contrast agent, composed of liposome and SF6, was synthesized from the mixture solution of $21{\mu}mol$ DPPC (1, 2-Dihexadecanoyl-sn-glycero-3-phosphocholine, $C_{40}H_{80}NO_8P$), $9{\mu}mol$ cholesterol, $1.9{\mu}mol$ of DCP (Dihexadecylphosphate, $[CH_3(CH_2)_{15}O]_2P(O)OH$), and chloroform. After evaporation in a warm water bath and drying during a period of 12-24 hours, the contrast agent was synthesized by the sonication process by addition of buffer and SF6 gas. The size of the contrast agent was controlled by use of either extruder or sonication methods. After synthesis of contrast agents, analysis of the size distribution of the bubbles was performed using dynamic light scattering measurement methods. The degradation curve was also evaluated by changes in the number of contrast agents via light microscopy immediate, 12 hours, 24 hours, 36 hours, 48 hours, 60 hours, 72 hours, and 84 hours after synthesis. For evaluation of the role as an US contrast agent, the echogenicity of the synthesized microbubble was compared with commercially available microbubbles (SonoVue, Bracco, Milan, Italy) using a clinical ultrasound machine and phantom. Results: The contrast agents were synthesized successfully using an evaporation-drying-sonication method. The majority of bubbles showed a mean size of 154.2 nanometers, and they showed marked degradation 24 hours after synthesis. ANOVA test revealed a significant difference among SonoVue, synthesized contrast agent, and saline (p < 0.001). Although no significant difference was observed between SonoVue and the synthesized contrast agent, difference in echogenicity was observed between synthesized contrast agent and saline (p < 0.01). Conclusion: We could synthesize ultrasound contrast agents using an evaporation-drying-sonication method. On the basis of these results, many prospective types of research, such as anticancer drug delivery, gene delivery, including siRNA or microRNA, targeted molecular imaging, and targeted therapy can be performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.69-74
• /
• 2018

With the increasing development of industrial society and the availability of high quality electrical energy, the simplification of operation and maintenance procedures is required, in order to ensure the reliability and safety of electrical systems. In this paper, the dielectric breakdown characteristics of $N_2-O_2$ mixed gas solid insulation, which is used as an alternative to SF6 in various electric power facilities, are verified. When the gas mixture has a composition ratio similar to that of the atmosphere, the dielectric breakdown characteristics are relatively stabilized. It was confirmed that the breakdown voltage of the gas in the electrode near an equal electric field increased with increasing pressure according to Paschen's rule. The breakdown voltage of the surface increased linearly with increasing pressure, and the difference was caused by the mixing ratio of $O_2$ gas. This change in the surface insulation breakdown voltage was caused by the influence of the electrically negative $O_2$ gas and the intermolecular collision distance. In this study, the influence of the intermolecular impact distance was larger (than that in the absence of the electrically negative $O_2$ gas). The breakdown voltage relation applicable to Teflon according to the surface insulation characteristics was calculated. The characteristics of the surface insulation properties of Teflon, which is used as a solid insulation material, were derived as a function of pressure. It is thought that these results can be used as the basic data for the insulation design of electric power facilities.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.2
• /
• pp.120-128
• /
• 2013

This paper presents the results of sloshing experiments having different fluids in model tanks with various density ratios. The experimental model consisting water and air at ambient, which has been commonly used, is not consistent in density ratio with that of an actual LNG cargo tank. Therefore, an advanced experimental scheme is developed to consider the same density ratio of LNG and NG by using a mixed gas of sulfur hexafluoride ($SF_6$) and nitrogen ($N_2$). For experimental observation, a two-dimensional model tank of 1/40 scale and a three-dimensional model tank of 1/50 scale have been manufactured and tested at various conditions. Two different fillings with various excitation frequencies under regular motions have been considered for the two-dimensional model tank, and three different filling levels under irregular motions have been imposed for the three-dimensional model tank. The density ratio between gas and liquid varies from the ratio of the ambient air and water to that of the actual LNG cargo container, and the different composition of gas is used for this variation. Based on the present experimental results, it is found that the decrease of sloshing pressure is predicted when the density ratio increases.