• Journal of the Korean Mathematical Society
• /
• v.34 no.2
• /
• pp.293-307
• /
• 1997

In this paper we present the $L^2$-estimation for the kernel $K_n$ of the remaider term for the Gaussian quadrature with respect to one of four Chebyshev weight functions and the error bound of the type on the contour $$ $\mid$R_n(f)$\mid$ \leq \frac{2\pi}{\sqrt{l(\Gamma)}} max_{z\in\Gamma}$\mid$f(z)$\mid$ (\smallint_\Gamma $\mid$K_n(z)$\mid$^2$\mid$dz$\mid$)^\frac{2}{1}, $$ where $l(\Gamma)$ denotes the length of the contour $\Gamma$.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.5
• /
• pp.584-593
• /
• 2007

BACnet is a standard data communication protocol especially designed for building automation and control networks. BACnet uses the Master-Slave/Token-Passing (MS/TP) protocol as one of its field-level networks. In this study, the performance of the BACnet MS/TP protocol is evaluated using an experimental model. The network performance is investigated and evaluated in terms of token rotation time and round trip time. The experimental results show that the performance of the MS/TP network is heavily influenced by the network traffic load, the assignment of MS/TP node address and the network configuration parameter called $N_{max_info-frames}$. Based on the experimental results, simple practical designing guidelines for BACnet MS/TP network systems are also proposed.

• Journal of the Chungcheong Mathematical Society
• /
• v.20 no.3
• /
• pp.261-267
• /
• 2007

We show the existence of the positive solution for the system of the following nonlinear wave equations with Dirichlet boundary conditions $$u_{tt}-u_{xx}+av^+=s{\phi}_{00}+f$$, $$v_{tt}-v_{xx}+bu^+=t{\phi}_{00}+g$$, $$u({\pm}\frac{\pi}{2},t)=v({\pm}\frac{\pi}{2},t)=0$$, where $u_+=max\{u,0\}$, s, $t{\in}R$, ${\phi}_{00}$ is the eigenfunction corresponding to the positive eigenvalue ${\lambda}_{00}=1$ of the eigenvalue problem $u_{tt}-u_{xx}={\lambda}_{mn}u$ with $u({\pm}\frac{\pi}{2},t)=0$, $u(x,t+{\pi})=u(x,t)=u(-x,t)=u(x,-t)$ and f, g are ${\pi}$-periodic, even in x and t and bounded functions in $[-\frac{\pi}{2},\frac{\pi}{2}]{\times}[-\frac{\pi}{2},\frac{\pi}{2}]$ with $\int_{-\frac{\pi}{2}}^{\frac{\pi}{2}}f{\phi}_{00}=\int_{-\frac{\pi}{2}}^{\frac{\pi}{2}}g{\phi}_{00}=0$.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.203-207
• /
• 2009

WiBro(Mobile WiMAX) has gained momentum as a top candidate to deliver the dream of full mobile wireless internet. To save cost and time in WiBro network design, simulation tool has to deploy powerful and useful analysis functions. If path loss model is more accurate, the reliability of analysis result of simulation tool will be much improved. So we emphasize on the importance of pathloss model in WiBro network design in this paper. For this, we introduce to three kinds of pathloss models(SUI, SCM, SCM-E) supposed properly models in WiBro RF (Radio Frequency) environment. Also we treat from basic theory to practical substance on the pathloss model to adopt WiBro network design/optimization. Finally, we describe about wireless network analysis tool named 'CellPLAN(R)' and techniques possible to improvethe accuracy of pathloss model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9C
• /
• pp.835-842
• /
• 2003

For an odd prime p and integer n, m and k such that n=(2m＋1)ㆍk, a new family of p-ary sequences of period p$^{n}$ -1 with optimal correlation property is constructed using the p-ary Helleseth-Gong sequences with ideal autocorrelation, where the size of the sequence family is p$^{n}$ . That is, the maximum nontrivial correlation value R$_{max}$ of all pairs of distinct sequences in the family does not exceed p$^{n}$ 2/ ＋1, which means the optimal correlation property in terms of Welch's lower bound. It is also derived that the linear span of the sequences in the family is (m＋2)ㆍn except for the m-sequence in the family.

• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.479-484
• /
• 1996

The tribological properties of ceramics are very important in the application to engineering ceramic parts such as mechanical seal slurry valve disc and so on. In this study the effect of graphite addition on the mechanical and tribological properties of RBSC/graphite composites were investigated. The composites were prepared by adding graphite powder to the mixture of SiC powder metallic siliconcarbon black and alumina. Bending strength water absorption friction coefficient the amount of worn out material at a certain time and maximum surface roughness(Rmax) of the prepared composites were measured and crystalline phases were examined with XRD. The composite containing 5 vol% graphite powder showed improved bending strength due to high green density and decreased friction coefficient and wear resistance. The friction coefficient and the wear resistance of the composite were increased by adding graphite powder up to 10 vol% They decreased however as increasing the amount of graphite powder more that 10vol% There was no linear relationship between the tribological properties and bending strength of the composites.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.66-69
• /
• 2003

This paper presents the procedures for the evaluation of the maximum surface roughness and the shapes of the cut remainder employing the ridge method. The shapes and the heights of the cut remainder are estimated by overlapping adjacent ridges in consideration of the various machining parameters: the feedrate. the path interval. The maximum surface roughness in plane cutting modes are derived as a function of the maximum effective cutter radius, R$\_$eff,max/. and the path interval ratio, $\tau$$\_$fp/, The predicted results are compared with the values estimated by the conventional roughness model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.489-493
• /
• 2000

Turbine blade has trouble of cracking at root region. Fracture surface of blade root is surveyed by SEM and AFM to clear relation between fracture mechanical parameter and surface parameter (striation width and surface roughness). Service stress is predicted by maximum height roughness $R_{max}$, on fractured surface and stress analysis on turbine blade. It is to thought that turbine blade is fractured by abnormal condition such as incorrect fittings between pin and pin hole but isn't fractured by normal service conditions such as steam pressure, centrifugal force and torsional force.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.71-77
• /
• 2001

Experimental study if die-sinking electrical discharge machining(EDM) was conducted with rotating electrode system including inside hole for increasing the material removal rate(MRR). With the help of dielectric fluid flow through the inside according to the different internal diameter of the hole, the molten workpiece debris could be removed and flushed out during the EDM, Cold die alloy(SKD-1) was executed for different peak current and duty factor. From this study, the MRR was found to be increased with the peak current. The more MRR was obtained for the case of electrode inside diam-eter of 10 mm, but the MRR was decreased as the diameter near at the 4mm and 6mm. The values of surface roughness and roundness were analyzed under various conditions, and these were affected by the inside diameter change of electrode.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1533-1540
• /
• 2007

The most critical function of the Communication Based Train Control system is wayside and on-board Radio communication. Radio communication must be safely made without errors. The standards for CBTC has not been established yet, and research on Radio communication systems for use in Train control systems adopting CBTC system such as the magnetic levitation train must continue. This paper will discuss the characteristics of Radio communication technology currently used domestically such as GSM-R, IEEE 802.11, TETRA, MESH, and WiMAX/WiBro, and will investigate the potential possibility of applying them to Train control systems.