• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.131-139
• /
• 1992

The understanding and appllication of fatigue crack propagation mechanism in variable amplitude loading is very important for life prediction of the air travel structures. Particularly, the retardation and arrest behavior of fatigue crack propagation by single tension overloading is essential to the understanding and appllication of fatigue crack propagation mechanism in variable amplitude loading. Numerous studies of the retardation behavior have been performed, however investigations of the arrest behavior have not been enough yet. As for the arrest behavior, Willenborg had reported that the overload shut-off ratio $[R_{so}=(K_{OL})/K_{max})_{crack arrest}]$ had been the material constant, but recently several investigators have reported that the overload shut-off ratio depends upon the stress ratio. In this study, authors have investigated the effect of stress ratio on the threshold overload shut-off ratio to generate arrest of fatigue crack growth in high tensile aluminum alloy 7075-T735 which have used in material for air travel structures, It has been $-0.4\leqqR\leqq0.4$ till now, the region of stress ratio investigated. The threshold overload shut-off ratio has decreased as stress ratio has increased in overall region of -$-0.4\leqqR\leqq0.4$ and the linearity has been seen in this material. Moreover, the experimental equation between $R_{so}$ and R has been made; The relation has been $R_{so}=-R+2.6$.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.4
• /
• pp.243-248
• /
• 2008

The bean bug Riptortus clavatus Thunberg (Heteroptera: Alydidae) is an important pest, causing serious yield loss in soybean. But the information on mechanism of resistance to R. clavatus is limited. The objective of this study was to identify QTLs for R. clavatus resistance using simple sequence repeat (SSR) markers in a soybean population of recombinant inbred lines (RILs) developed from the cross PI 171451 ${\times}$ Hwaeomputkong. A genetic map from this population was constructed with a total of 136 SSR markers covering 1073.9 cM on 20 linkage groups (LGs). With 126 $F_5$ RILs, two independent QTLs for resistance to R. clavatus were mapped on LGs B1 and C2. The amount of phenotypic variation explained by these QTLs ranged from 12 to 16%. PI 171451 showed an escape response to R. clavatus. Under feeding conditions, 14.4% of RILs showed greater resistance to R. clavatus than the resistant parent. The resistance to R. clavatus in soybean from PI 171451 was incomplete and quantitatively inherited and the QTLs for resistance to R. clavatus detected in the RIL population were not significantly affected by epistatic interactions.

• YAKHAK HOEJI
• /
• v.41 no.5
• /
• pp.615-621
• /
• 1997

Dehydropeptidase-I (DHP-I) was solubilized from porcine kidney by treatment with n-butanol and partially purified 19.25 fold by $(NH_4)_2SO_4$ precipitation, DEAE-Sepharose CL-6B ion exchange chromatography and Sephacryl S-300 HR chromatography with an overall yield of 19.16. DHP-I showed its optimal activity at pH 7.5 and 25$^{\circ}C$. Its activity was stable under neutral and alkaline conditions, but was disappeared under acidic condition. And DHP-I was heat-labile and its activity remained at 45$^{\circ}C$ for 3hrs. The enzyme was not inhibited by dicationic ions, while its activity was increased by $Co^{2+}$(1mM) and $Zn^{2+}$ (0.1mM). The enzyme was inhibited by EDTA and N-ethylmaleimide. The relative molecular mass of DHP-I was estimated to be approximately 100kDa by gel filtration chromatography. The $K_m$ value of DHP-I for glycyldehydrophenylalanine (GDHP) was 1.98mM. DWP20418 [(1R, 5S, 6S)-6-[1-(R)-Hydroxyethyl]-1-methyl-2-[(2S, 4S)-2-(piperazinylcarbonyl)-1-(R)-hydroxyethyl)pyrrolidine-4-thio]carbapen-2-em-3-carboxylic acid], compared with meropenem (MEPM), was rather easily hydrolized by DHP-I, while it was four times more resistant than imipenem (IPM) to DHP-I.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.4
• /
• pp.243-249
• /
• 2016

In this paper, we evaluate the effectiveness of mechanical horseback riding exercise training for cardiopulmonary responses in 26 healthy adults (male 14, female 12) and suggest its clinical applicability. Exercise was performed using a mechanical horseback riding machine, JOBA(R) (Panasonic Electric Works, Osaka, Japan) and riding movement speed was increased from level 2 (0.73Hz), to 4 (0.9Hz), to 6 (1.03Hz), to 8 (1.2Hz), to 9 (1.3Hz) and maintained 3minutes in each level. Heart rate, blood pressure, maximum oxygen consumption (VO2max) were measured by respiratory gas analysis system (TruOne 2400, Parvo Medics, USA) and exercise tolerance test system(Q Stress, Cardiac Science, USA). To measure exercise intensity, metabolic equivalent (MET) were measured and percent of Heart rate reserve (%HRR), percent of peak heart rate (%peak HR) and calorie consumption were calculated. The results were analysed by SPSS 18.0. We found that the exercise intensity of mechanical horseback riding exercise using JOBA(R) for 15 minutes is moderate in healthy adult who received pre-training.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.538-542
• /
• 2015

In this work, effects of the blend composition composed of 0, 10, 20, 30 and 40 wt% of nylon 6 to epoxy (diglycidylether of bisphenol-A, DGEBA) resin were investigated in terms of cure kinetics and thermal stability by differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). As the content of the nylon 6 increased, the maximum exothermic temperature ($T_{max}$) and the value of cure activation energy ($E_a$) decreased. The maximum exothermic temperature of the blending samples decreased with increasing in nylon 6 content, resulting in the decrease in curing activation energy of them due to the rapid curing reaction with epoxy resin in this system. From TGA analysis results of the DGEBA/nylon 6, the thermal stability based on the thermal stability index ($A^*{\cdot}K^*$) and integral procedure decomposition temperature (IPDT) increased with increase in the nylon 6 content. This was because of the combination of DGEBA and nylon 6 having good heat resistance, resulting in improving thermal stability of the DGEBA/nylon 6.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.50-56
• /
• 2013

The radiation effects on the auto-ignition and extinction characteristics of a non-premixed fuel-air counterflow field were numerically investigated. A detailed reaction mechanism of GRI-v3.0 was used for the calculation of chemical reactions and the optically-thin radiation model was adopted in the simulations. The flame-controlling continuation method was also used in the simulation to predict the auto-ignition point and extinction limits precisely. As a result, it was found that the maximum H radical concentration, $(Y_H)_{max}$, rather than the maximum temperature was suitable to understand the ignition and extinction behaviors. S-, C- and O-curves, which were well known from the previous theory, were identified by investigating the $(Y_H)_{max}$. The radiative heat loss fraction ($f_r$) and spatially-integrated heat release rate (IHRR) were introduced to grasp each extinction mechanism. It was also found that the $f_r$ was the highest at the radiative extinction limit. At the flame stretch extinction limit, the flame was extinguished due to the conductive heat loss which attributed to the high strain rate although the heat release rate was the highest. The radiation affected on the radiative extinction limit and auto-ignition point considerably, however the effect on the flame stretch extinction limit was negligible. A stable flame regime defined by the region between each extinction limit became wide with increasing the fuel temperature.

• Journal of Applied Biological Chemistry
• /
• v.62 no.3
• /
• pp.251-255
• /
• 2019

The effect of soaking temperature on the moisture uptake and the protein loss of soybeans during soaking process investigated. As the soaking temperature increased, the soaking rate significantly increased and Peleg model was suitable for describing the soaking characteristics of the soybean with high $R^2$ values (>0.991). The soaking time to achieve the target moisture content of soybean (130%) was estimated to be 12.6, 3.11 and 2.31 h at 25, 35 and $45^{\circ}C$, respectively. Peleg model well described the protein loss kinetics of soybean during soaking with high $R^2$ values (>0.941). The results showed that the protein loss of soybean at the target moisture content were 35.2, 93.1 and 103.0 mg/g at 25, 35 and $45^{\circ}C$, respectively. In this study, the optimum soaking condition for quality of soybean was 12.6 h of soaking time at $25^{\circ}C$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.255-264
• /
• 2022

The active ingredients of Napttegi Kong(GML, Glycine max landrace), a type of native rare soybeans, were identified, and an ultrasonic extraction method was introduced as an eco-friendly extraction method. Through the component analysis of the Napttegi Kong extract, the epicatechin, which was not found in conventional soybeans, was identified. For effective extraction using ultrasonic, the main extraction conditions were optimized using the response surface analysis method. Through the Box-Behnken design process, 15 experiments were conducted with the extraction temperature, the ratio of extraction solvent/solution, and extraction time as key independent variables. A quadratic regression equation for the two dependent variables, epicatechin content and total isoflavone content, was derived, and the coefficients of determination were found to be high as R² = 0.9939 and R² = 0.9844, respectively, confirming that the correlation showed high significance. The extraction conditions satisfying the maximum expectations of these two dependent variables were predicted. to be 40.4℃ of extraction temperature, 19.3 times of extraction solvent/solution, and 91 sec of extraction time. The expected value and the actual experimental value of the epikatechin content and the total isoflavone content were similar, so it was confirmed that this experimental method is a highly reliable optimization model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.3
• /
• pp.166-172
• /
• 2022

In this study, we photograph driving obstacle objects such as crosswalks, side spheres, manholes, braille blocks, partial ramps, temporary safety barriers, stairs, and inclined curb that hinder or cause inconvenience to the movement of the vulnerable using electric mobility aids. We develop an optimal AI model that classifies photographed objects and automatically recognizes them, and implement an algorithm that can efficiently determine obstacles in front of electric mobility aids. In order to enable object detection to be AI learning with high probability, the labeling form is labeled as a polygon form when building a dataset. It was developed using a Mask R-CNN model in Detectron2 framework that can detect objects labeled in the form of polygons. Image acquisition was conducted by dividing it into two groups: the general public and the transportation weak, and image information obtained in two areas of the test bed was secured. As for the parameter setting of the Mask R-CNN learning result, it was confirmed that the model learned with IMAGES_PER_BATCH: 2, BASE_LEARNING_RATE 0.001, MAX_ITERATION: 10,000 showed the highest performance at 68.532, so that the user can quickly and accurately recognize driving risks and obstacles.

• Analytical Science and Technology
• /
• v.22 no.1
• /
• pp.101-108
• /
• 2009

The bioequivalence of two pioglitazone tablets, Actos$^{(R)}$ tablet (Takeda Chemical Industries, reference drug) and Pioglitazone tablet (Boryung Company, test drug) was evaluated according to the guidelines of Korea Food and Drug Administration. Twenty-eight healthy male Korean volunteers received each medicine (pioglitazone dose of 30 mg) in a $2{\times}2$ crossover study with one week washout interval. After drug administration, blood samples were collected at specific time intervals from 0-36 hours. The plasma concentrations of pioglitazone were determined by high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS). The total chromatographic run time was 5 min and calibration curves were linear over the concentration range of 5-2000 ng/mL for pioglitazone. The method was validated for selectivity, sensitivity, linearity, accuracy and precision. The pharmacokinetic parameters were determined from the plasma concentration-time profiles of both formulations. The primary calculated pharmacokinetic parameters were compared statistically to evaluate bioequivalence between the two preparations. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for Pioglitazone tablet and Actos$^{(R)}$ tablet were log0.9422~log1.1040 and log0.9200~log1.1556, respectively. Based on the statistical considerations, we can conclude that the test drug, Pioglitazone tablet was bioequivalent to the reference drug, Actos$^{(R)}$ tablet.